Skip to content
worldfires
AU · Australia · –

North Burnett fire, 25 September 2020 North Burnett

Out · last detection

The fire started on in North Burnett, Australia, and satellites saw it burning for 25 days. Copernicus’s global GWIS system rebuilt a burnt perimeter of 5,041 hectares from heat detections, spread across a single municipality.

It is number 226 by size of the 227 fires with a page that started in Queensland since 2016. Number 66 in Australia in 2020, of 67.

Burnt area
5,041ha
GWIS perimeter (Copernicus)
Duration
25days
25 Sept 2020 – 19 Oct 2020
Municipalities hit
1
local government areas
Started on
25 Sept
2020
Heat detections
284
in a single hotspot: 105 MW
Danger at start
30
High · FWI index
Average daily power
68MW
detected power per day, on average

Where it burned

HOTSPOTS BY DAY 25 Sept19 Oct
19 Oct 2020

How it evolved, day by day

25 Sept 2020 · 69 MW · 6 26 Sept 2020 · 58 MW · 25 27 Sept 2020 · 112 MW · 39 28 Sept 2020 · 80 MW · 24 29 Sept 2020 · 95 MW · 11 30 Sept 2020 · 141 MW · 4 1 Oct 2020 · 46 MW · 5 2 Oct 2020 · 36 MW · 8 3 Oct 2020 · 21 MW · 7 4 Oct 2020 · 130 MW · 16 5 Oct 2020 · 16 MW · 1 6 Oct 2020 · 18 MW · 3 7 Oct 2020 · 19 MW · 3 8 Oct 2020 · 42 MW · 15 9 Oct 2020 · 249 MW · 19 10 Oct 2020 · 205 MW · 31 11 Oct 2020 · 49 MW · 7 12 Oct 2020 · 13 MW · 3 13 Oct 2020 · 94 MW · 23 14 Oct 2020 · 11 MW · 9 15 Oct 2020 · 126 MW · 7 16 Oct 2020 · 44 MW · 14 17 Oct 2020 · 7 MW · 2 18 Oct 2020 · 6 MW · 1 19 Oct 2020 · 10 MW · 1
25 Sept 30 Sept 5 Oct 9 Oct 15 Oct

Fire radiative power detected each day, in megawatts, and number of hotspots. The magenta bar marks the peak day.

The weather it burned in

32°high
46km/h · peak gust
12%lowest humidity

It had gone one day without rain (1 mm or more) when it started. Rain came after the fire: 8.3 mm on 21 Oct.

This area had burned before

41% of the perimeter overlaps earlier fires recorded since 2016: 2,136 ha in 2016.

How big is it?

10 km
It burned the equivalent of 3.2% of the area of London (50 km² against 1,583 km²).

London boundary: geoBoundaries · Office for National Statistics (Open Government Licence v3.0).

This compares size, not location: both shapes are at the same scale, north up, centred on each other.

What happened to each town

  1. North Burnett where it started
    5,069 ha
    0.3 %

Burnt area inside each municipality, from crossing the GWIS perimeter with administrative boundaries. The distance runs from the point marking the centre of each area to the nearest fire: staying a kilometre away does not mean it reached the houses.

People and buildings inside the perimeter

GHSL 2020
Built-up area< 0.1 ha
Residents< 20

Inside the perimeter there was no noticeable built-up land and almost nobody lived there (GHSL 2020, satellite-based estimate).

This is an estimate on 100 m cells, made from satellite imagery and census data: it does not mean that homes burned or that anyone was harmed. The perimeter also contains land that never burned.

Source: Global Human Settlement Layer (GHS-BUILT-S and GHS-POP R2023A), European Commission Joint Research Centre (JRC), © European Union, CC BY 4.0. Sum inside the perimeter computed by WorldFires. human-settlement.emergency.copernicus.eu

The weather day by day

ECMWF ERA5 reanalysis at the fire location, the standard reference for past weather, and the Canadian Fire Weather Index (the same system Copernicus uses), computed by WorldFires from that data. Days after the fire run until the first rain.

Open-Meteo.com (CC BY 4.0) · Copernicus Climate Change Service (ERA5)

Day High Min. humidity Peak gust Rain Danger (FWI)
25 Sept 28.6 °C 33 % 46 km/h 0.0 mm High 30
26 Sept 24.1 °C 13 % 45 km/h 0.0 mm Very high 41
27 Sept 24.4 °C 15 % 28 km/h 0.0 mm High 34
28 Sept 26.0 °C 22 % 42 km/h 0.0 mm High 30
29 Sept 25.6 °C 25 % 41 km/h 0.0 mm High 36
30 Sept 24.9 °C 29 % 38 km/h 0.0 mm High 31
1 Oct 28.5 °C 34 % 27 km/h 0.0 mm High 24
2 Oct 30.7 °C 24 % 33 km/h 0.0 mm High 27
3 Oct 29.4 °C 28 % 39 km/h 0.0 mm High 38
4 Oct 27.2 °C 32 % 40 km/h 0.0 mm Very high 39
5 Oct 27.5 °C 30 % 33 km/h 0.0 mm High 34
6 Oct 28.5 °C 28 % 30 km/h 0.0 mm High 34
7 Oct 28.9 °C 27 % 35 km/h 0.0 mm High 36
8 Oct 30.5 °C 26 % 31 km/h 0.0 mm High 29
9 Oct 32.1 °C 27 % 38 km/h 0.0 mm High 32
10 Oct 31.4 °C 12 % 37 km/h 0.0 mm Very high 42
11 Oct 29.6 °C 28 % 37 km/h 0.0 mm High 37
12 Oct 27.4 °C 32 % 34 km/h 0.0 mm High 35
13 Oct 28.1 °C 28 % 39 km/h 0.0 mm High 35
14 Oct 26.5 °C 29 % 44 km/h 0.0 mm Very high 44
15 Oct 28.1 °C 21 % 45 km/h 0.0 mm Very high 44
16 Oct 28.9 °C 24 % 35 km/h 0.0 mm High 38
17 Oct 29.2 °C 26 % 34 km/h 0.0 mm High 37
18 Oct 30.1 °C 24 % 31 km/h 0.0 mm High 36
19 Oct 29.5 °C 29 % 37 km/h 0.0 mm Very high 40
20 Oct after 28.8 °C 36 % 40 km/h 0.3 mm High 32
21 Oct after 23.6 °C 60 % 34 km/h 8.3 mm Low 6

Its twins: fires that started in the same weather

It started with an FWI of 29.9, a minimum humidity of 33% and 1 day without rain. Fires in the area that started in weather like this since 2016: 20.

FWI at the start 29.9
Minimum humidity 33 %
Days without rain 1
this fire chosen twins rest of the area
Almost identicalSimilar

Outlines of the closest twins

Western Downs fire, December 2019
7,248 ha 14 days FWI 29.3 Min. humidity 32 % 82 km away, in 2019

First rain (1 mm or more) after it ended: 11.4 mm on 12 Jan.

What happened to them

17 days
median duration
8,271 ha
median area
30 %
went past 10,000 ha
3.8 mm
rain at the end (median; 15 of 20 had it)

It stayed below its twins: 5,041 ha against a median of 8,271 ha. It lasted 25 days, against 17 days.

In 5 of 20, not even 1 mm fell in the ten days after the end: they went out without rain. In the rest, the first rainy day brought a median of 3.8 mm.

This is a bank of analogues: it shows what usually happens, not what will happen. With fewer than 15 twins we give no figures. How we calculate it

How it ended

8.3 mmfirst rain
21 Oct2 days after it ended
46km/h · max. gust

It was considered over on 19 Oct, and on 21 Oct 8.3 mm fell. We do not know whether the rain or the firefighters put it out. Twins with rain when they ended: 15 of 20, with a median of 3.8 mm.

Weather on this page: Open-Meteo.com (CC BY 4.0) · Copernicus Climate Change Service (ERA5)

How a twin is chosen

  • Same area: fires that have already ended, less than 250 km from this one, since 2016.
  • Same start: we compare the FWI on the first day, the minimum humidity that day and the run of days without rain before it. The slider sets how much they may differ.
  • Only pages with final weather data (ERA5 reanalysis) calculated in the same way as this fire’s; agricultural and grass burns and pages with data under review are left out.
  • Fires burning at the same time as this one (a week before or after) are left out: they share the same spell of weather and do not count as a precedent.
  • They are sorted by similarity, and the outlines of the first five are drawn.

How we calculate it

Before and after, from space

Drag the line to compare the same ground before the fire and after it.

Before · 18 Sept 2020
After · 26 Oct 2020

If the day is cloudy, change the date: each satellite passes once a day. In false colour the burnt ground looks brown or red.

Detections table · 284Every satellite heat detection, one by one, with time, satellite, power and coordinates.
⬇ Download CSV Times in UTC. Each detection is a 375 m pixel: a large fire yields hundreds per pass.
Date and timeSatelliteFRP (MW)LatLon

Other fires nearby

All fires in Australia

Frequently asked questions

How long did the North Burnett fire last?
According to the heat detections seen by satellite inside the perimeter, it burned from 25 September 2020 to 19 October 2020 (25 days). The perimeter dates it from 25 September 2020 to 18 October 2020.
How much area did it burn?
The perimeter GWIS (Copernicus) rebuilt from heat detections is 5,041 hectares (50.4 km²). It is an estimate: official national figures may differ.
Which municipalities burned?
The fire only entered North Burnett (5,069 ha, 0.3 %).
What was the weather like?
During the fire the temperature reached 32.1 °C, humidity dropped to 12 % and gusts hit 46 km/h. The fire danger index (FWI) reached 44, class Very high.
Where does this data come from?
From the GWIS (Copernicus) burnt perimeter, NASA FIRMS VIIRS hotspots and the administrative boundaries of Australia (geoBoundaries). It is not an official report.
How did the fires that started in similar weather in this area end?
Fires less than 250 km away that started since 2016 with a similar FWI, humidity and dry spell: 20. Their median duration was 17 days and their median area 8,271 ha; 30 % went past 10,000 ha. In 5 of 20, not even 1 mm fell in the ten days after the end: they went out without rain. In the rest, the first rainy day brought a median of 3.8 mm.

Where to verify it

A satellite detection is not an official report. Final figures and the fire’s status are published by each country’s emergency service.

Emergency number: 000 · Emergency number and official warnings

Satellite cross-check

History of this page · 1 Changes in area, dates, name, official record or merged pages, compared every night since 24 October 2026.
  1. Last day with fire: 18 October 2020 → 19 October 2020.

RSS Changes to this page With cross-checks and a citable version

Does something look wrong on this page?

This page is built from satellite data and official records, and it sometimes gets things wrong: the wrong dates, the wrong town, two fires merged into one, or something that was not a wildfire at all. If you know this fire first-hand (you live nearby, saw it, fought it or reported on it), tell us what really happened and we will check it.

Report an error
What do you think is wrong?

We will only use your email to reply about this report. Privacy. This is not an emergency service: if there is a fire now, call 000.

How we know this
  • Perimeter: GWIS (Copernicus), rebuilt from heat detections rather than mapped on imagery.
  • Dates adjusted with the VIIRS detections inside the perimeter, which said 25 September 2020 to 18 October 2020. 284 Suomi-NPP VIIRS detections on those dates.
  • We have not matched this page with any official record.
  • Weather: Copernicus ERA5 reanalysis at the fire location, in cells of about 25 km.
  • Built-up area and population come from the JRC Global Human Settlement Layer (epoch 2020, 100 m cells), summed inside the perimeter: an estimate of what was there, not a damage count.

How we build fire pages: methodology

Where this data comes from

The perimeter comes from the Copernicus Global Wildfire Information System (GWIS), which rebuilds it from MODIS and VIIRS heat detections and publishes it under CC BY 4.0. It is not measured on imagery as in Europe, so it is an estimate. Heat detections come from the VIIRS sensors aboard Suomi-NPP and NOAA-20, distributed by NASA FIRMS at 375 m resolution. Municipal boundaries come from geoBoundaries ADM2 (Creative Commons Attribution 4.0 International (CC BY 4.0)). The area per municipality is computed by WorldFires by crossing the perimeter with those boundaries, so it may differ from each country’s official figure.