Skip to content
worldfires
MW · Malawi · –

Nkhata Bay fire, 18 October 2024 Nkhata Bay

Out · last detection 4 Nov 2024, 11:05 UTC

The fire started on 18 October 2024 in Nkhata Bay, Malawi, and satellites saw it burning for 18 days. Copernicus’s global GWIS system rebuilt a burnt perimeter of 1,224 hectares from heat detections, spread across a single municipality.

It is the 215th largest in Northern Region since 2016 (of 319 with a page). Number 24 in Malawi in 2024, of 39.

Burnt area
1,224ha
GWIS perimeter (Copernicus)
Duration
18days
18 Oct 2024 – 4 Nov 2024
Municipalities hit
1
districts
Started on
18 Oct
2024
Heat detections
77
in a single hotspot: 49 MW
Danger at start
1
Very low · FWI index
Average daily power
86MW
detected power per day, on average

Where it burned

HOTSPOTS BY DAY 18 Oct4 Nov
4 Nov 2024

How it evolved, day by day

18 Oct 2024 · 12 MW · 1 20 Oct 2024 · 25 MW · 4 21 Oct 2024 · 324 MW · 13 22 Oct 2024 · 168 MW · 13 23 Oct 2024 · 176 MW · 9 24 Oct 2024 · 55 MW · 8 25 Oct 2024 · 27 MW · 3 26 Oct 2024 · 47 MW · 7 28 Oct 2024 · 108 MW · 10 29 Oct 2024 · 23 MW · 1 30 Oct 2024 · 36 MW · 6 2 Nov 2024 · 0 MW · 0 4 Nov 2024 · 28 MW · 2
21 Oct 25 Oct 29 Oct 4 Nov

Fire radiative power detected each day, in megawatts, and number of hotspots. The magenta bar marks the peak day.

The weather it burned in

34°high
41km/h · peak gust
35%lowest humidity

It had gone 0 days without rain (1 mm or more) when it started. Rain came after the fire: 2.5 mm on 8 Nov.

This area had burned before

55% of the perimeter overlaps earlier fires recorded since 2016: 675 ha in 2023.

How big is it?

10 km
It burned the equivalent of 0.8% of the area of London (12 km² against 1,583 km²).

London boundary: geoBoundaries · Office for National Statistics (Open Government Licence v3.0).

This compares size, not location: both shapes are at the same scale, north up, centred on each other.

What happened to each town

  1. Nkhata Bay where it started
    1,231 ha
    0.3 %

Burnt area inside each municipality, from crossing the GWIS perimeter with administrative boundaries. The distance runs from the point marking the centre of each area to the nearest fire: staying a kilometre away does not mean it reached the houses.

People and buildings inside the perimeter

GHSL 2025
Built-up area9.2 ha
Residents≈ 1,400

Inside the perimeter there were about 9.2 hectares of built-up land and about 1,400 residents (GHSL 2025, satellite-based estimate).

This is an estimate on 100 m cells, made from satellite imagery and census data: it does not mean that homes burned or that anyone was harmed. The perimeter also contains land that never burned. The GHSL 2025 epoch is a projection made from 2020 and earlier data.

Source: Global Human Settlement Layer (GHS-BUILT-S and GHS-POP R2023A), European Commission Joint Research Centre (JRC), © European Union, CC BY 4.0. Sum inside the perimeter computed by WorldFires. human-settlement.emergency.copernicus.eu

The weather day by day

ECMWF ERA5 reanalysis at the fire location, the standard reference for past weather, and the Canadian Fire Weather Index (the same system Copernicus uses), computed by WorldFires from that data. Days after the fire run until the first rain.

Open-Meteo.com (CC BY 4.0) · Copernicus Climate Change Service (ERA5)

Day High Min. humidity Peak gust Rain Danger (FWI)
18 Oct 27.9 °C 64 % 27 km/h 1.9 mm Very low 1
19 Oct 29.6 °C 58 % 25 km/h 0.2 mm Very low 4
20 Oct 30.0 °C 48 % 31 km/h 0.0 mm Moderate 11
21 Oct 30.5 °C 44 % 36 km/h 0.4 mm Moderate 14
22 Oct 30.2 °C 46 % 37 km/h 0.2 mm Moderate 15
23 Oct 29.4 °C 42 % 36 km/h 0.0 mm Moderate 18
24 Oct 29.3 °C 41 % 35 km/h 0.0 mm Moderate 19
25 Oct 31.0 °C 35 % 35 km/h 0.0 mm High 22
26 Oct 31.7 °C 35 % 36 km/h 0.0 mm High 24
27 Oct 30.8 °C 46 % 32 km/h 0.0 mm High 23
28 Oct 31.4 °C 48 % 30 km/h 0.0 mm Moderate 20
29 Oct 33.6 °C 47 % 31 km/h 0.4 mm High 22
30 Oct 30.8 °C 50 % 35 km/h 0.2 mm Moderate 18
31 Oct 31.5 °C 40 % 39 km/h 0.2 mm High 25
1 Nov 30.3 °C 49 % 41 km/h 0.8 mm Moderate 16
2 Nov 29.0 °C 53 % 37 km/h 2.8 mm Low 6
3 Nov 30.8 °C 44 % 39 km/h 0.0 mm Moderate 18
4 Nov 31.0 °C 46 % 37 km/h 0.5 mm Moderate 19
5 Nov after 31.3 °C 48 % 37 km/h 0.2 mm Moderate 21
6 Nov after 32.1 °C 41 % 38 km/h 0.1 mm High 26
7 Nov after 30.6 °C 44 % 40 km/h 0.3 mm High 26
8 Nov after 26.4 °C 61 % 46 km/h 2.5 mm Low 6

Its twins: fires that started in the same weather

It started with an FWI of 0.8, a minimum humidity of 64% and rain the day before. Fires in the area that started in weather like this since 2016: 24.

FWI at the start 0.8
Minimum humidity 64 %
Days without rain 0
this fire chosen twins rest of the area
Almost identicalSimilar

Outlines of the closest twins

Nyasa fire, October 2019
3,099 ha 15 days FWI 0.2 Min. humidity 63 % 99 km away, in 2019

First rain (1 mm or more) after it ended: 2.0 mm on 5 Nov.

What happened to them

17 days
median duration
2,984 ha
median area
100 %
went past 1,000 ha
2.5 mm
rain at the end (median; 19 of 24 had it)

It stayed below its twins: 1,224 ha against a median of 2,984 ha. It lasted 18 days, against 17 days.

In 5 of 24, not even 1 mm fell in the ten days after the end: they went out without rain. In the rest, the first rainy day brought a median of 2.5 mm.

This is a bank of analogues: it shows what usually happens, not what will happen. With fewer than 15 twins we give no figures. How we calculate it

How it ended

2.5 mmfirst rain
8 Nov4 days after it ended
41km/h · max. gust

It was considered over on 4 Nov, and on 8 Nov 2.5 mm fell. We do not know whether the rain or the firefighters put it out. Twins with rain when they ended: 19 of 24, with a median of 2.5 mm.

Weather on this page: Open-Meteo.com (CC BY 4.0) · Copernicus Climate Change Service (ERA5)

How a twin is chosen

  • Same area: fires that have already ended, less than 250 km from this one, since 2016.
  • Same start: we compare the FWI on the first day, the minimum humidity that day and the run of days without rain before it. The slider sets how much they may differ.
  • Only pages with final weather data (ERA5 reanalysis) calculated in the same way as this fire’s; agricultural and grass burns and pages with data under review are left out.
  • Fires burning at the same time as this one (a week before or after) are left out: they share the same spell of weather and do not count as a precedent.
  • They are sorted by similarity, and the outlines of the first five are drawn.

How we calculate it

Before and after, from space

Drag the line to compare the same ground before the fire and after it.

Before · 11 Oct 2024
After · 11 Nov 2024

If the day is cloudy, change the date: each satellite passes once a day. In false colour the burnt ground looks brown or red.

The smoke

CAMS · Copernicus

On 30 October 2024 the air beside the fire reached 107 µg/m³ of PM2.5. That day averaged 54: 3.6 times the WHO daily guideline (15).

PM2.5 peak107 µg/m³
Days over the guideline12 days
PM10153 µg/m³
Optical depth0.77
18 Oct22 Oct26 Oct30 Oct
Good Fair Moderate Poor Very poor Extremely poor

Particles from the Copernicus CAMS model at the centre of the perimeter; these are not measurements in each town. The pale bar is the worst hour, the solid one the daily average.

Open-Meteo.com (CC BY 4.0) · Copernicus Atmosphere Monitoring Service (CAMS)

Detections table · 77Every satellite heat detection, one by one, with time, satellite, power and coordinates.
⬇ Download CSV Times in UTC. Each detection is a 375 m pixel: a large fire yields hundreds per pass.
Date and timeSatelliteFRP (MW)LatLon

Other fires nearby

All fires in Malawi

Frequently asked questions

How long did the Nkhata Bay fire last?
According to the heat detections seen by satellite inside the perimeter, it burned from 18 October 2024 to 4 November 2024 (18 days). The perimeter dates it from 20 October 2024 to 30 October 2024.
How much area did it burn?
The perimeter GWIS (Copernicus) rebuilt from heat detections is 1,224 hectares (12.2 km²). It is an estimate: official national figures may differ.
Which municipalities burned?
The fire only entered Nkhata Bay (1,231 ha, 0.3 %).
What was the weather like?
During the fire the temperature reached 33.6 °C, humidity dropped to 35 % and gusts hit 41 km/h. The fire danger index (FWI) reached 25, class High.
Where does this data come from?
From the GWIS (Copernicus) burnt perimeter, NASA FIRMS VIIRS hotspots and the administrative boundaries of Malawi (geoBoundaries). It is not an official report.
How did the fires that started in similar weather in this area end?
Fires less than 250 km away that started since 2016 with a similar FWI, humidity and dry spell: 24. Their median duration was 17 days and their median area 2,984 ha; 100 % went past 1,000 ha. In 5 of 24, not even 1 mm fell in the ten days after the end: they went out without rain. In the rest, the first rainy day brought a median of 2.5 mm.

Where to verify it

A satellite detection is not an official report. Final figures and the fire’s status are published by each country’s emergency service.

Satellite cross-check

History of this page · 3 Changes in area, dates, name, official record or merged pages, compared every night since 24 October 2026.
  1. Last day with fire: 31 October 2024 → 4 November 2024.
  2. Last day with fire: 30 October 2024 → 31 October 2024.
  3. Start date: 20 October 2024 → 18 October 2024.

RSS Changes to this page With cross-checks and a citable version

Does something look wrong on this page?

This page is built from satellite data and official records, and it sometimes gets things wrong: the wrong dates, the wrong town, two fires merged into one, or something that was not a wildfire at all. If you know this fire first-hand (you live nearby, saw it, fought it or reported on it), tell us what really happened and we will check it.

Report an error
What do you think is wrong?

We will only use your email to reply about this report. Privacy.

How we know this
  • Perimeter: GWIS (Copernicus), rebuilt from heat detections rather than mapped on imagery.
  • Dates adjusted with the VIIRS detections inside the perimeter, which said 20 October 2024 to 30 October 2024. 77 Suomi-NPP VIIRS detections on those dates.
  • We have not matched this page with any official record.
  • Weather: Copernicus ERA5 reanalysis at the fire location, in cells of about 25 km.
  • Built-up area and population come from the JRC Global Human Settlement Layer (epoch 2025, 100 m cells), summed inside the perimeter: an estimate of what was there, not a damage count.

How we build fire pages: methodology

Where this data comes from

The perimeter comes from the Copernicus Global Wildfire Information System (GWIS), which rebuilds it from MODIS and VIIRS heat detections and publishes it under CC BY 4.0. It is not measured on imagery as in Europe, so it is an estimate. Heat detections come from the VIIRS sensors aboard Suomi-NPP and NOAA-20, distributed by NASA FIRMS at 375 m resolution. Municipal boundaries come from geoBoundaries ADM2 (Creative Commons Attribution 3.0 Intergovernmental Organisations (CC BY 3.0 IGO)). The area per municipality is computed by WorldFires by crossing the perimeter with those boundaries, so it may differ from each country’s official figure.