Skip to content
worldfires
MW · Malawi · –

Nkhata Bay fire, 10 October 2023 Nkhata Bay

Out · last detection

The fire started on in Nkhata Bay, Malawi, and satellites saw it burning for 19 days. Copernicus’s global GWIS system rebuilt a burnt perimeter of 1,043 hectares from heat detections, spread across a single municipality.

It is number 301 by size of the 319 fires with a page that started in Northern Region since 2016. Number 32 in Malawi in 2023, of 35.

The power measured by the satellite is low (30.0 MW in the strongest hotspot), more typical of grass or stubble burning, or a slow surface fire, than of a large crown fire.

Burnt area
1,043ha
GWIS perimeter (Copernicus)
Duration
19days
10 Oct 2023 – 28 Oct 2023
Municipalities hit
1
districts
Started on
10 Oct
2023
Heat detections
54
in a single hotspot: 30 MW
Danger at start
34
High · FWI index
Average daily power
42MW
detected power per day, on average

Where it burned

HOTSPOTS BY DAY 10 Oct28 Oct
27 Oct 2023

How it evolved, day by day

13 Oct 2023 · 8 MW · 2 15 Oct 2023 · 5 MW · 2 16 Oct 2023 · 3 MW · 1 17 Oct 2023 · 27 MW · 5 18 Oct 2023 · 172 MW · 13 19 Oct 2023 · 123 MW · 10 20 Oct 2023 · 46 MW · 4 21 Oct 2023 · 10 MW · 3 22 Oct 2023 · 27 MW · 5 24 Oct 2023 · 38 MW · 8 27 Oct 2023 · 7 MW · 1
13 Oct 18 Oct 24 Oct

Fire radiative power detected each day, in megawatts, and number of hotspots. The magenta bar marks the peak day.

The weather it burned in

33°high
45km/h · peak gust
29%lowest humidity

It had gone 5 days without rain (1 mm or more) when it started. Rain came after the fire: 1.8 mm on 31 Oct.

This area had burned before

No earlier perimeters overlap this fire since 2016, when the satellite record begins.

How big is it?

10 km
It burned the equivalent of 0.7% of the area of London (10 km² against 1,583 km²).

London boundary: geoBoundaries · Office for National Statistics (Open Government Licence v3.0).

This compares size, not location: both shapes are at the same scale, north up, centred on each other.

What happened to each town

  1. Nkhata Bay where it started
    1,049 ha
    0.2 %

Burnt area inside each municipality, from crossing the GWIS perimeter with administrative boundaries. The distance runs from the point marking the centre of each area to the nearest fire: staying a kilometre away does not mean it reached the houses.

People and buildings inside the perimeter

GHSL 2025
Built-up area5.8 ha
Residents≈ 800

Inside the perimeter there were about 5.8 hectares of built-up land and about 800 residents (GHSL 2025, satellite-based estimate).

This is an estimate on 100 m cells, made from satellite imagery and census data: it does not mean that homes burned or that anyone was harmed. The perimeter also contains land that never burned. The GHSL 2025 epoch is a projection made from 2020 and earlier data.

Source: Global Human Settlement Layer (GHS-BUILT-S and GHS-POP R2023A), European Commission Joint Research Centre (JRC), © European Union, CC BY 4.0. Sum inside the perimeter computed by WorldFires. human-settlement.emergency.copernicus.eu

The weather day by day

ECMWF ERA5 reanalysis at the fire location, the standard reference for past weather, and the Canadian Fire Weather Index (the same system Copernicus uses), computed by WorldFires from that data. Days after the fire run until the first rain.

Open-Meteo.com (CC BY 4.0) · Copernicus Climate Change Service (ERA5)

Day High Min. humidity Peak gust Rain Danger (FWI)
10 Oct 30.2 °C 44 % 37 km/h 0.0 mm High 34
11 Oct 29.7 °C 39 % 36 km/h 0.0 mm High 34
12 Oct 30.9 °C 38 % 35 km/h 0.0 mm High 32
13 Oct 31.6 °C 44 % 31 km/h 0.0 mm High 31
14 Oct 31.7 °C 43 % 35 km/h 0.1 mm High 32
15 Oct 31.6 °C 36 % 36 km/h 0.0 mm High 34
16 Oct 32.0 °C 50 % 37 km/h 0.2 mm High 28
17 Oct 31.7 °C 41 % 35 km/h 0.4 mm High 29
18 Oct 29.9 °C 47 % 33 km/h 0.2 mm High 31
19 Oct 29.3 °C 46 % 38 km/h 0.0 mm High 34
20 Oct 29.1 °C 49 % 41 km/h 0.5 mm High 31
21 Oct 29.6 °C 48 % 34 km/h 0.7 mm High 23
22 Oct 31.5 °C 42 % 32 km/h 0.0 mm High 25
23 Oct 31.3 °C 40 % 36 km/h 0.0 mm High 33
24 Oct 32.3 °C 29 % 35 km/h 0.0 mm Very high 42
25 Oct 32.8 °C 35 % 36 km/h 0.0 mm Very high 42
26 Oct 31.1 °C 49 % 45 km/h 0.7 mm High 38
27 Oct 31.5 °C 44 % 41 km/h 0.4 mm High 27
28 Oct 31.4 °C 37 % 36 km/h 0.0 mm High 35
29 Oct after 30.9 °C 40 % 37 km/h 0.0 mm High 34
30 Oct after 31.3 °C 38 % 42 km/h 0.0 mm High 38
31 Oct after 29.0 °C 48 % 44 km/h 1.8 mm Moderate 19

Its twins: fires that started in the same weather

It started with an FWI of 33.7, a minimum humidity of 44% and 5 days without rain. Fires in the area that started in weather like this since 2016: 15.

FWI at the start 33.7
Minimum humidity 44 %
Days without rain 5
this fire chosen twins rest of the area
Almost identicalSimilar

Outlines of the closest twins

Nkhotakota fire, October 2019
2,622 ha 17 days FWI 31.5 Min. humidity 44 % 152 km away, in 2019

First rain (1 mm or more) after it ended: 5.8 mm on 5 Nov.

What happened to them

15 days
median duration
1,432 ha
median area
100 %
went past 1,000 ha
6.0 mm
rain at the end (median; 15 of 15 had it)

It burned an area similar to its twins (1,043 ha against a median of 1,432 ha) and lasted 19 days, against 15 days.

All of them had rain in the ten days after the end: the first rainy day brought a median of 6.0 mm.

This is a bank of analogues: it shows what usually happens, not what will happen. With fewer than 15 twins we give no figures. How we calculate it

How it ended

1.8 mmfirst rain
31 Oct3 days after it ended
45km/h · max. gust

It was considered over on 28 Oct, and on 31 Oct 1.8 mm fell. We do not know whether the rain or the firefighters put it out. Twins with rain when they ended: 15 of 15, with a median of 6.0 mm.

Weather on this page: Open-Meteo.com (CC BY 4.0) · Copernicus Climate Change Service (ERA5)

How a twin is chosen

  • Same area: fires that have already ended, less than 250 km from this one, since 2016.
  • Same start: we compare the FWI on the first day, the minimum humidity that day and the run of days without rain before it. The slider sets how much they may differ.
  • Only pages with final weather data (ERA5 reanalysis) calculated in the same way as this fire’s; agricultural and grass burns and pages with data under review are left out.
  • Fires burning at the same time as this one (a week before or after) are left out: they share the same spell of weather and do not count as a precedent.
  • They are sorted by similarity, and the outlines of the first five are drawn.

How we calculate it

Before and after, from space

Drag the line to compare the same ground before the fire and after it.

Before · 3 Oct 2023
After · 4 Nov 2023

If the day is cloudy, change the date: each satellite passes once a day. In false colour the burnt ground looks brown or red.

The smoke

CAMS · Copernicus

On 18 October 2023 the air beside the fire reached 79 µg/m³ of PM2.5. That day averaged 45: 3.0 times the WHO daily guideline (15).

PM2.5 peak79 µg/m³
Days over the guideline12 days
PM10114 µg/m³
Optical depth0.85
14 Oct17 Oct20 Oct23 Oct
Good Fair Moderate Poor Very poor Extremely poor

Particles from the Copernicus CAMS model at the centre of the perimeter; these are not measurements in each town. The pale bar is the worst hour, the solid one the daily average.

Open-Meteo.com (CC BY 4.0) · Copernicus Atmosphere Monitoring Service (CAMS)

Detections table · 54Every satellite heat detection, one by one, with time, satellite, power and coordinates.
⬇ Download CSV Times in UTC. Each detection is a 375 m pixel: a large fire yields hundreds per pass.
Date and timeSatelliteFRP (MW)LatLon

Other fires nearby

All fires in Malawi

Frequently asked questions

How long did the Nkhata Bay fire last?
According to the heat detections seen by satellite inside the perimeter, it burned from 10 October 2023 to 28 October 2023 (19 days). The perimeter dates it from 16 October 2023 to 22 October 2023.
How much area did it burn?
The perimeter GWIS (Copernicus) rebuilt from heat detections is 1,043 hectares (10.4 km²). It is an estimate: official national figures may differ.
Which municipalities burned?
The fire only entered Nkhata Bay (1,049 ha, 0.2 %).
What was the weather like?
During the fire the temperature reached 32.8 °C, humidity dropped to 29 % and gusts hit 45 km/h. The fire danger index (FWI) reached 42, class Very high.
Where does this data come from?
From the GWIS (Copernicus) burnt perimeter, NASA FIRMS VIIRS hotspots and the administrative boundaries of Malawi (geoBoundaries). It is not an official report.
How did the fires that started in similar weather in this area end?
Fires less than 250 km away that started since 2016 with a similar FWI, humidity and dry spell: 15. Their median duration was 15 days and their median area 1,432 ha; 100 % went past 1,000 ha. All of them had rain in the ten days after the end: the first rainy day brought a median of 6.0 mm.

Where to verify it

A satellite detection is not an official report. Final figures and the fire’s status are published by each country’s emergency service.

Satellite cross-check

History of this page · 2 Changes in area, dates, name, official record or merged pages, compared every night since 24 October 2026.
  1. Last day with fire: 22 October 2023 → 28 October 2023.
  2. Start date: 16 October 2023 → 10 October 2023.

RSS Changes to this page With cross-checks and a citable version

Does something look wrong on this page?

This page is built from satellite data and official records, and it sometimes gets things wrong: the wrong dates, the wrong town, two fires merged into one, or something that was not a wildfire at all. If you know this fire first-hand (you live nearby, saw it, fought it or reported on it), tell us what really happened and we will check it.

Report an error
What do you think is wrong?

We will only use your email to reply about this report. Privacy.

How we know this
  • Perimeter: GWIS (Copernicus), rebuilt from heat detections rather than mapped on imagery.
  • Dates adjusted with the VIIRS detections inside the perimeter, which said 16 October 2023 to 22 October 2023. 54 Suomi-NPP VIIRS detections on those dates.
  • We have not matched this page with any official record.
  • Weather: Copernicus ERA5 reanalysis at the fire location, in cells of about 25 km.
  • Built-up area and population come from the JRC Global Human Settlement Layer (epoch 2025, 100 m cells), summed inside the perimeter: an estimate of what was there, not a damage count.

How we build fire pages: methodology

Where this data comes from

The perimeter comes from the Copernicus Global Wildfire Information System (GWIS), which rebuilds it from MODIS and VIIRS heat detections and publishes it under CC BY 4.0. It is not measured on imagery as in Europe, so it is an estimate. Heat detections come from the VIIRS sensors aboard Suomi-NPP and NOAA-20, distributed by NASA FIRMS at 375 m resolution. Municipal boundaries come from geoBoundaries ADM2 (Creative Commons Attribution 3.0 Intergovernmental Organisations (CC BY 3.0 IGO)). The area per municipality is computed by WorldFires by crossing the perimeter with those boundaries, so it may differ from each country’s official figure.