Skip to content
worldfires
BR · Brazil · –

Niquelândia fire, August 2022 Niquelândia

Out · last detection 12 Sept 2022, 04:54 UTC

The fire started on 31 August 2022 in Niquelândia, Brazil, and satellites saw it burning for 13 days. Copernicus’s global GWIS system rebuilt a burnt perimeter of 18,785 hectares from heat detections, spread across a single municipality.

It is the 31th largest in Goiás since 2016 (of 488 with a page). Number 37 in Brazil in 2022, of 682.

Burnt area
18,785ha
GWIS perimeter (Copernicus)
Duration
13days
31 Aug 2022 – 12 Sept 2022
Municipalities hit
1
municipalities
Started on
31 Aug
2022
Heat detections
713
in a single hotspot: 53 MW
Danger at start
51
Extreme · FWI index
Average daily power
323MW
detected power per day, on average

Where it burned

HOTSPOTS BY DAY 31 Aug12 Sept
12 Sept 2022

How it evolved, day by day

31 Aug 2022 · 7 MW · 2 1 Sept 2022 · 435 MW · 39 2 Sept 2022 · 327 MW · 40 3 Sept 2022 · 59 MW · 19 4 Sept 2022 · 197 MW · 20 5 Sept 2022 · 649 MW · 97 6 Sept 2022 · 628 MW · 122 7 Sept 2022 · 168 MW · 35 8 Sept 2022 · 262 MW · 56 9 Sept 2022 · 417 MW · 76 10 Sept 2022 · 660 MW · 117 11 Sept 2022 · 360 MW · 71 12 Sept 2022 · 36 MW · 19
31 Aug 3 Sept 6 Sept 10 Sept

Fire radiative power detected each day, in megawatts, and number of hotspots. The magenta bar marks the peak day.

The weather it burned in

34°high
50km/h · peak gust
11%lowest humidity

It had gone more than two months without rain (1 mm or more) when it started. Rain came after the fire: 3.3 mm on 21 Sept.

This area had burned before

79% of the perimeter overlaps earlier fires recorded since 2016: 10,804 ha in 2017, 9,042 ha in 2019. Part of it burned more than once, so the yearly figures add up to more than the 14,908 ha that had burned before.

How big is it?

10 km
It burned the equivalent of 12% of the area of London (188 km² against 1,583 km²).

London boundary: geoBoundaries · Office for National Statistics (Open Government Licence v3.0).

This compares size, not location: both shapes are at the same scale, north up, centred on each other.

What happened to each town

  1. Niquelândia 34,964 inhabitants where it started
    18,907 ha reached on 31 Aug
    1.9 %

Burnt area inside each municipality, from crossing the GWIS perimeter with administrative boundaries. The distance runs from the point marking the centre of each area to the nearest fire: staying a kilometre away does not mean it reached the houses.

People and buildings inside the perimeter

GHSL 2020
Built-up area0.89 ha
Residents≈ 50

Inside the perimeter there were about 0.89 hectares of built-up land and about 50 residents (GHSL 2020, satellite-based estimate).

This is an estimate on 100 m cells, made from satellite imagery and census data: it does not mean that homes burned or that anyone was harmed. The perimeter also contains land that never burned.

Source: Global Human Settlement Layer (GHS-BUILT-S and GHS-POP R2023A), European Commission Joint Research Centre (JRC), © European Union, CC BY 4.0. Sum inside the perimeter computed by WorldFires. human-settlement.emergency.copernicus.eu

The weather day by day

ECMWF ERA5 reanalysis at the fire location, the standard reference for past weather, and the Canadian Fire Weather Index (the same system Copernicus uses), computed by WorldFires from that data. Days after the fire run until the first rain.

Open-Meteo.com (CC BY 4.0) · Copernicus Climate Change Service (ERA5)

Started with Extreme FWI: 46 % of the area in Brazil 60 days without rain: 55 % of the area in Brazil

Day High Min. humidity Peak gust Rain Danger (FWI)
31 Aug 27.3 °C 27 % 44 km/h 0.0 mm Extreme 51
1 Sept 27.2 °C 20 % 50 km/h 0.0 mm Extreme 53
2 Sept 28.7 °C 18 % 35 km/h 0.0 mm Very high 40
3 Sept 30.8 °C 12 % 30 km/h 0.0 mm Very high 46
4 Sept 31.8 °C 12 % 31 km/h 0.0 mm Extreme 52
5 Sept 31.5 °C 13 % 44 km/h 0.0 mm Extreme 63
6 Sept 29.4 °C 24 % 49 km/h 0.0 mm Extreme 65
7 Sept 27.8 °C 26 % 48 km/h 0.0 mm Very high 48
8 Sept 30.8 °C 18 % 38 km/h 0.0 mm Very high 45
9 Sept 31.0 °C 14 % 35 km/h 0.0 mm Extreme 58
10 Sept 32.3 °C 11 % 30 km/h 0.0 mm Very high 49
11 Sept 33.5 °C 13 % 21 km/h 0.0 mm Extreme 52
12 Sept 33.6 °C 11 % 41 km/h 0.0 mm Extreme 62
13 Sept after 34.1 °C 12 % 34 km/h 0.0 mm Extreme 51
14 Sept after 32.9 °C 17 % 31 km/h 0.0 mm Extreme 62
15 Sept after 33.2 °C 19 % 27 km/h 0.0 mm Very high 43
16 Sept after 34.0 °C 17 % 39 km/h 0.0 mm Extreme 54
17 Sept after 33.3 °C 20 % 36 km/h 0.0 mm Very high 48
18 Sept after 28.8 °C 35 % 46 km/h 0.5 mm Very high 40
19 Sept after 28.6 °C 35 % 26 km/h 0.1 mm High 35
20 Sept after 28.8 °C 38 % 28 km/h 0.3 mm High 33
21 Sept after 29.1 °C 40 % 25 km/h 3.3 mm High 31

Its twins: fires that started in the same weather

It started with an FWI of 51.4, a minimum humidity of 27% and more than two months without rain. Fires in the area that started in weather like this since 2016: 20.

FWI at the start 51.4
Minimum humidity 27 %
Days without rain 60+
this fire chosen twins rest of the area
Almost identicalSimilar

Outlines of the closest twins

Padre Bernardo fire, August 2019
11,091 ha 29 days FWI 48.4 Min. humidity 27 % 84 km away, in 2019

First rain (1 mm or more) after it ended: none in the following ten days.

What happened to them

11 days
median duration
5,540 ha
median area
10 %
went past 10,000 ha
1.8 mm
rain at the end (median; 6 of 20 had it)

It was 3.4 times larger than the median of its twins and lasted 13 days, against 11 days.

None of its 20 twins burned more. The weather on the first day does not explain everything: the wind in the following days, the fuel and the firefighting also count. In 14 of 20, not even 1 mm fell in the ten days after the end: they went out without rain. In the rest, the first rainy day brought a median of 1.8 mm.

This is a bank of analogues: it shows what usually happens, not what will happen. With fewer than 15 twins we give no figures. How we calculate it

How it ended

3.3 mmfirst rain
21 Sept9 days after it ended
50km/h · max. gust

It was considered over on 12 Sept, and on 21 Sept 3.3 mm fell. We do not know whether the rain or the firefighters put it out. Twins with rain when they ended: 6 of 20, with a median of 1.8 mm.

Weather on this page: Open-Meteo.com (CC BY 4.0) · Copernicus Climate Change Service (ERA5)

How a twin is chosen

  • Same area: fires that have already ended, less than 250 km from this one, since 2016.
  • Same start: we compare the FWI on the first day, the minimum humidity that day and the run of days without rain before it. The slider sets how much they may differ.
  • Only pages with final weather data (ERA5 reanalysis) calculated in the same way as this fire’s; agricultural and grass burns and pages with data under review are left out.
  • Fires burning at the same time as this one (a week before or after) are left out: they share the same spell of weather and do not count as a precedent.
  • They are sorted by similarity, and the outlines of the first five are drawn.

How we calculate it

Before and after, from space

Drag the line to compare the same ground before the fire and after it.

Before · 24 Aug 2022
After · 19 Sept 2022

If the day is cloudy, change the date: each satellite passes once a day. In false colour the burnt ground looks brown or red.

The smoke

CAMS · Copernicus

On 15 September 2022 the air beside the fire reached 39 µg/m³ of PM2.5. That day averaged 26: 1.7 times the WHO daily guideline (15).

PM2.5 peak39 µg/m³
Days over the guideline1 day
PM1056 µg/m³
Optical depth0.71
29 Aug2 Sept6 Sept10 Sept14 Sept
Good Fair Moderate Poor Very poor Extremely poor

Particles from the Copernicus CAMS model at the centre of the perimeter; these are not measurements in each town. The pale bar is the worst hour, the solid one the daily average.

Open-Meteo.com (CC BY 4.0) · Copernicus Atmosphere Monitoring Service (CAMS)

Detections table · 713Every satellite heat detection, one by one, with time, satellite, power and coordinates.
⬇ Download CSV Times in UTC. Each detection is a 375 m pixel: a large fire yields hundreds per pass.
Date and timeSatelliteFRP (MW)LatLon

Other fires nearby

All fires in Brazil

Frequently asked questions

How long did the Niquelândia fire last?
GWIS (Copernicus) dates it between 31 August 2022 and 12 September 2022: 13 days between the first and last heat detection of the perimeter.
How much area did it burn?
The perimeter GWIS (Copernicus) rebuilt from heat detections is 18,785 hectares (187.8 km²). It is an estimate: official national figures may differ.
Which municipalities burned?
The fire only entered Niquelândia (18,907 ha, 1.9 %).
What was the weather like?
During the fire the temperature reached 33.6 °C, humidity dropped to 11 % and gusts hit 50 km/h. The fire danger index (FWI) reached 65, class Extreme.
Where does this data come from?
From the GWIS (Copernicus) burnt perimeter, NASA FIRMS VIIRS hotspots and the administrative boundaries of Brazil (geoBoundaries). It is not an official report.
How did the fires that started in similar weather in this area end?
Fires less than 250 km away that started since 2016 with a similar FWI, humidity and dry spell: 20. Their median duration was 11 days and their median area 5,540 ha; 10 % went past 10,000 ha. None of its 20 twins burned more. The weather on the first day does not explain everything: the wind in the following days, the fuel and the firefighting also count. In 14 of 20, not even 1 mm fell in the ten days after the end: they went out without rain. In the rest, the first rainy day brought a median of 1.8 mm.

Where to verify it

A satellite detection is not an official report. Final figures and the fire’s status are published by each country’s emergency service.

Emergency number: 193 · Emergency number and official warnings

Satellite cross-check

History of this page Changes in area, dates, name, official record or merged pages, compared every night since 24 October 2026.

Does something look wrong on this page?

This page is built from satellite data and official records, and it sometimes gets things wrong: the wrong dates, the wrong town, two fires merged into one, or something that was not a wildfire at all. If you know this fire first-hand (you live nearby, saw it, fought it or reported on it), tell us what really happened and we will check it.

Report an error
What do you think is wrong?

We will only use your email to reply about this report. Privacy. This is not an emergency service: if there is a fire now, call 193.

How we know this
  • Perimeter: GWIS (Copernicus), rebuilt from heat detections rather than mapped on imagery.
  • Dates from the perimeter: the VIIRS detections inside it did not change them. 713 Suomi-NPP VIIRS detections on those dates.
  • We have not matched this page with any official record.
  • Weather: Copernicus ERA5 reanalysis at the fire location, in cells of about 25 km.
  • Built-up area and population come from the JRC Global Human Settlement Layer (epoch 2020, 100 m cells), summed inside the perimeter: an estimate of what was there, not a damage count.

How we build fire pages: methodology

Where this data comes from

The perimeter comes from the Copernicus Global Wildfire Information System (GWIS), which rebuilds it from MODIS and VIIRS heat detections and publishes it under CC BY 4.0. It is not measured on imagery as in Europe, so it is an estimate. Heat detections come from the VIIRS sensors aboard Suomi-NPP and NOAA-20, distributed by NASA FIRMS at 375 m resolution. Municipal boundaries come from geoBoundaries ADM2 (Creative Commons Attribution 3.0 Intergovernmental Organisations (CC BY 3.0 IGO)). The area per municipality is computed by WorldFires by crossing the perimeter with those boundaries, so it may differ from each country’s official figure.