Skip to content
worldfires
MZ · Mozambique · →

Nicoadala fire, 10 September 2026 Nicoadala, Derre

Out · last detection 18 Sept 2026, 10:45 UTC

The fire started on 10 September 2026 in Nicoadala, Mozambique, and satellites saw it burning for 8 days. Copernicus’s global GWIS system rebuilt a burnt perimeter of 3,196 hectares from heat detections, spread across 2 municipalities.

It is the 736th largest in Zambézia since 2016 (of 842 with a page). Number 478 in Mozambique in 2026, of 532.

Compare with…
Burnt area
3,196ha
GWIS perimeter (Copernicus)
Duration
8days
10 Sept 2026 – 17 Sept 2026
Municipalities hit
2
districts
Started on
10 Sept
2026
Heat detections
83
in a single hotspot: 92 MW
Danger at start
6
Low · FWI index
Average daily power
85MW
detected power per day, on average

Where it burned

HOTSPOTS BY DAY 10 Sept17 Sept
18 Sept 2026

How it evolved, day by day

11 Sept 2026 · 14 MW · 2 12 Sept 2026 · 22 MW · 3 13 Sept 2026 · 19 MW · 3 14 Sept 2026 · 48 MW · 9 15 Sept 2026 · 110 MW · 18 16 Sept 2026 · 211 MW · 32 17 Sept 2026 · 250 MW · 15 18 Sept 2026 · 3 MW · 1
11 Sept 13 Sept 15 Sept 17 Sept

Fire radiative power detected each day, in megawatts, and number of hotspots. The magenta bar marks the peak day.

The weather it burned in

37°high
52km/h · peak gust
21%lowest humidity

It had gone 0 days without rain (1 mm or more) when it started.

This area had burned before

70% of the perimeter overlaps earlier fires recorded since 2016: 290 ha in 2018, 1,022 ha in 2019, 762 ha in 2021, 708 ha in 2022, 574 ha in 2025. Part of it burned more than once, so the yearly figures add up to more than the 2,247 ha that had burned before.

How big is it?

10 km
It burned the equivalent of 2% of the area of London (32 km² against 1,583 km²).

London boundary: geoBoundaries · Office for National Statistics (Open Government Licence v3.0).

This compares size, not location: both shapes are at the same scale, north up, centred on each other.

What happened to each town

  1. Nicoadala where it started
    2,379 ha reached on 11 Sept
    0.9 %
  2. 832 ha reached on 13 Sept
    0.2 %

Burnt area inside each municipality, from crossing the GWIS perimeter with administrative boundaries. The distance runs from the point marking the centre of each area to the nearest fire: staying a kilometre away does not mean it reached the houses.

People and buildings inside the perimeter

GHSL 2025
Built-up area0.18 ha
Residents≈ 30

Inside the perimeter there were about 0.18 hectares of built-up land and about 30 residents (GHSL 2025, satellite-based estimate).

This is an estimate on 100 m cells, made from satellite imagery and census data: it does not mean that homes burned or that anyone was harmed. The perimeter also contains land that never burned. The GHSL 2025 epoch is a projection made from 2020 and earlier data.

Source: Global Human Settlement Layer (GHS-BUILT-S and GHS-POP R2023A), European Commission Joint Research Centre (JRC), © European Union, CC BY 4.0. Sum inside the perimeter computed by WorldFires. human-settlement.emergency.copernicus.eu

The weather day by day

ECMWF ERA5 reanalysis at the fire location, the standard reference for past weather, and the Canadian Fire Weather Index (the same system Copernicus uses), computed by WorldFires from that data. Days after the fire run until the first rain.

Open-Meteo.com (CC BY 4.0) · Copernicus Climate Change Service (ERA5)

Day High Min. humidity Peak gust Rain Danger (FWI)
10 Sept 30.0 °C 52 % 24 km/h 1.4 mm Low 6
11 Sept 32.0 °C 47 % 35 km/h 0.6 mm Moderate 14
12 Sept 33.1 °C 35 % 35 km/h 0.0 mm High 26
13 Sept 32.5 °C 36 % 31 km/h 0.0 mm High 26
14 Sept 32.5 °C 35 % 36 km/h 0.0 mm High 28
15 Sept 35.7 °C 24 % 38 km/h 0.0 mm High 35
16 Sept 35.9 °C 22 % 52 km/h 0.0 mm Very high 43
17 Sept 36.6 °C 21 % 36 km/h 0.0 mm Very high 40
18 Sept after 35.0 °C 22 % 42 km/h 0.0 mm Very high 42
19 Sept after 32.2 °C 35 % 35 km/h 0.0 mm High 34
20 Sept after 32.5 °C 33 % 36 km/h 0.0 mm High 36
21 Sept after 32.9 °C 39 % 34 km/h 0.0 mm High 33
22 Sept after 31.6 °C 39 % 36 km/h 0.0 mm High 32
23 Sept after 30.0 °C 46 % 30 km/h 0.1 mm High 26
24 Sept after 31.3 °C 41 % 36 km/h 0.0 mm High 29
25 Sept after 31.1 °C 37 % 36 km/h 0.1 mm High 28
26 Sept after 34.1 °C 32 % 28 km/h 0.0 mm High 32
27 Sept after 38.4 °C 20 % 34 km/h 0.0 mm Very high 45

Before and after, from space

Drag the line to compare the same ground before the fire and after it.

Before · 3 Sept 2026
After · 24 Sept 2026

If the day is cloudy, change the date: each satellite passes once a day. In false colour the burnt ground looks brown or red.

The smoke

CAMS · Copernicus

On 16 September 2026 the air beside the fire reached 92 µg/m³ of PM2.5. That day averaged 47: 3.2 times the WHO daily guideline (15).

PM2.5 peak92 µg/m³
Days over the guideline8 days
PM1096 µg/m³
Optical depth1.54
891011121314151617181920
Good Fair Moderate Poor Very poor Extremely poor

Particles from the Copernicus CAMS model at the centre of the perimeter; these are not measurements in each town. The pale bar is the worst hour, the solid one the daily average.

Open-Meteo.com (CC BY 4.0) · Copernicus Atmosphere Monitoring Service (CAMS)

Detections table · 83Every satellite heat detection, one by one, with time, satellite, power and coordinates.
⬇ Download CSV Times in UTC. Each detection is a 375 m pixel: a large fire yields hundreds per pass.
Date and timeSatelliteFRP (MW)LatLon

Other fires nearby

All fires in Mozambique ›

Frequently asked questions

How long did the Nicoadala fire last?
According to the heat detections seen by satellite inside the perimeter, it burned from 10 September 2026 to 17 September 2026 (8 days). The perimeter dates it from 13 September 2026 to 17 September 2026.
How much area did it burn?
The perimeter GWIS (Copernicus) rebuilt from heat detections is 3,196 hectares (32.0 km²). It is an estimate: official national figures may differ.
Which municipalities burned?
The fire entered 2 municipalities: Nicoadala (2,379 ha, 0.9 %); Derre (832 ha, 0.2 %).
What was the weather like?
During the fire the temperature reached 36.6 °C, humidity dropped to 21 % and gusts hit 52 km/h. The fire danger index (FWI) reached 43, class Very high.
Where does this data come from?
From the GWIS (Copernicus) burnt perimeter, NASA FIRMS VIIRS hotspots and the administrative boundaries of Mozambique (geoBoundaries). It is not an official report.

Where to verify it

A satellite detection is not an official report. Final figures and the fire’s status are published by each country’s emergency service.

Satellite cross-check

History of this page Changes in area, dates, name, official record or merged pages, compared every night since 24 October 2026.

No changes since 24 October 2026.

RSS Changes to this page

Does something look wrong on this page?

This page is built from satellite data and official records, and it sometimes gets things wrong: the wrong dates, the wrong town, two fires merged into one, or something that was not a wildfire at all. If you know this fire first-hand (you live nearby, saw it, fought it or reported on it), tell us what really happened and we will check it.

Report an error
What do you think is wrong?

We will only use your email to reply about this report. Privacy.

How we know this
  • Perimeter: GWIS (Copernicus), rebuilt from heat detections rather than mapped on imagery.
  • Dates adjusted with the VIIRS detections inside the perimeter, which said 13 September 2026 to 17 September 2026. 83 Suomi-NPP VIIRS detections on those dates.
  • We have not matched this page with any official record.
  • Weather: Copernicus ERA5 reanalysis at the fire location, in cells of about 25 km.
  • Built-up area and population come from the JRC Global Human Settlement Layer (epoch 2025, 100 m cells), summed inside the perimeter: an estimate of what was there, not a damage count.

How we build fire pages: methodology ›

Where this data comes from

The perimeter comes from the Copernicus Global Wildfire Information System (GWIS), which rebuilds it from MODIS and VIIRS heat detections and publishes it under CC BY 4.0. It is not measured on imagery as in Europe, so it is an estimate. Heat detections come from the VIIRS sensors aboard Suomi-NPP and NOAA-20, distributed by NASA FIRMS at 375 m resolution. Municipal boundaries come from geoBoundaries ADM2 (Creative Commons Attribution 3.0 Intergovernmental Organisations (CC BY 3.0 IGO)). The area per municipality is computed by WorldFires by crossing the perimeter with those boundaries, so it may differ from each country’s official figure.