Skip to content
worldfires
MZ · Mozambique · →

Mocuba fire, 16 August 2026 Mocuba, Derre

Out · last detection 15 Sept 2026, 22:52 UTC

The fire started on 16 August 2026 in Mocuba, Mozambique, and satellites saw it burning for 30 days. Copernicus’s global GWIS system rebuilt a burnt perimeter of 141,123 hectares from heat detections, spread across 2 municipalities.

This page is probably a fire complex, not a single fire. GWIS merges into one perimeter the fires that touch over weeks, which in large burning seasons can join dozens of separate fires. The total area is reliable; the origin and dates refer to the whole complex.

Other fire pages in the same area and on the same dates:

It is the 7th largest in Zambézia since 2016 (of 841 with a page). Number 5 in Mozambique in 2026, of 539.

Compare with…
Burnt area
141,123ha
GWIS perimeter (Copernicus)
Duration
30days
16 Aug 2026 – 14 Sept 2026
Municipalities hit
2
districts
Started on
16 Aug
2026
Heat detections
6,732
in a single hotspot: 198 MW
Danger at start
23
High · FWI index
Average daily power
2.2GW
detected power per day, on average

Where it burned

HOTSPOTS BY DAY 16 Aug14 Sept
15 Sept 2026

How it evolved, day by day

16 Aug 2026 · 55 MW · 10 17 Aug 2026 · 175 MW · 11 19 Aug 2026 · 10 MW · 2 20 Aug 2026 · 55 MW · 11 21 Aug 2026 · 1,236 MW · 163 22 Aug 2026 · 1,151 MW · 121 23 Aug 2026 · 1,768 MW · 196 24 Aug 2026 · 450 MW · 30 25 Aug 2026 · 1,395 MW · 168 26 Aug 2026 · 1,699 MW · 290 27 Aug 2026 · 252 MW · 30 28 Aug 2026 · 142 MW · 20 29 Aug 2026 · 28 MW · 5 30 Aug 2026 · 3,563 MW · 480 31 Aug 2026 · 7,703 MW · 972 1 Sept 2026 · 4,371 MW · 365 2 Sept 2026 · 2,821 MW · 372 3 Sept 2026 · 5,974 MW · 461 4 Sept 2026 · 8,208 MW · 790 5 Sept 2026 · 3,261 MW · 446 6 Sept 2026 · 1,133 MW · 110 7 Sept 2026 · 304 MW · 33 10 Sept 2026 · 47 MW · 6 11 Sept 2026 · 635 MW · 66 12 Sept 2026 · 1,632 MW · 176 13 Sept 2026 · 2,059 MW · 246 14 Sept 2026 · 3,206 MW · 348 15 Sept 2026 · 8,157 MW · 804
16 Aug 21 Aug 25 Aug 29 Aug 2 Sept 4 Sept 6 Sept 12 Sept

Fire radiative power detected each day, in megawatts, and number of hotspots. The magenta bar marks the peak day.

The weather it burned in

36°high
41km/h · peak gust
21%lowest humidity

It had gone 4 days without rain (1 mm or more) when it started. Rain came after the fire: 1.2 mm on 8 Sept.

This area had burned before

86% of the perimeter overlaps earlier fires recorded since 2016: 20,057 ha in 2016, 6,726 ha in 2017, 25,651 ha in 2018, 17,228 ha in 2019, 19,680 ha in 2020, 57,359 ha in 2021, 32,646 ha in 2022, 31,049 ha in 2023, 66,855 ha in 2024, 78,403 ha in 2025. Part of it burned more than once, so the yearly figures add up to more than the 121,331 ha that had burned before.

How big is it?

20 km
It burned the equivalent of 89% of the area of London (1,411 km² against 1,583 km²).

London boundary: geoBoundaries · Office for National Statistics (Open Government Licence v3.0).

This compares size, not location: both shapes are at the same scale, north up, centred on each other.

What happened to each town

  1. Mocuba where it started
    104,889 ha reached on 16 Aug
    12 %
  2. 37,113 ha reached on 17 Aug
    7.8 %

Burnt area inside each municipality, from crossing the GWIS perimeter with administrative boundaries. The distance runs from the point marking the centre of each area to the nearest fire: staying a kilometre away does not mean it reached the houses.

People and buildings inside the perimeter

GHSL 2025
Built-up area89 ha
Residents≈ 15,000

Inside the perimeter there were about 89 hectares of built-up land and about 15,000 residents (GHSL 2025, satellite-based estimate).

This is an estimate on 100 m cells, made from satellite imagery and census data: it does not mean that homes burned or that anyone was harmed. The perimeter also contains land that never burned. The GHSL 2025 epoch is a projection made from 2020 and earlier data.

Source: Global Human Settlement Layer (GHS-BUILT-S and GHS-POP R2023A), European Commission Joint Research Centre (JRC), © European Union, CC BY 4.0. Sum inside the perimeter computed by WorldFires. human-settlement.emergency.copernicus.eu

The weather day by day

ECMWF ERA5 reanalysis at the fire location, the standard reference for past weather, and the Canadian Fire Weather Index (the same system Copernicus uses), computed by WorldFires from that data. Days after the fire run until the first rain.

Open-Meteo.com (CC BY 4.0) · Copernicus Climate Change Service (ERA5)

Day High Min. humidity Peak gust Rain Danger (FWI)
21 Aug 31.4 °C 39 % 30 km/h 0.1 mm High 23
22 Aug 31.9 °C 33 % 32 km/h 0.0 mm High 28
23 Aug 33.0 °C 24 % 31 km/h 0.0 mm High 37
24 Aug 28.4 °C 43 % 33 km/h 0.1 mm High 29
25 Aug 28.8 °C 39 % 24 km/h 0.0 mm High 28
26 Aug 29.9 °C 41 % 35 km/h 0.0 mm High 32
27 Aug 27.0 °C 47 % 37 km/h 0.5 mm High 28
28 Aug 27.1 °C 56 % 33 km/h 2.2 mm Low 8
29 Aug 27.8 °C 48 % 27 km/h 0.0 mm Moderate 14
30 Aug 32.1 °C 33 % 30 km/h 0.0 mm High 28
31 Aug 34.2 °C 22 % 38 km/h 0.0 mm Very high 41
1 Sept 32.6 °C 28 % 36 km/h 0.0 mm Very high 40
2 Sept 32.8 °C 29 % 35 km/h 0.0 mm Very high 39
3 Sept 33.7 °C 26 % 31 km/h 0.0 mm High 38
4 Sept 35.7 °C 21 % 40 km/h 0.0 mm Very high 43
5 Sept 33.7 °C 33 % 41 km/h 0.0 mm Very high 42
6 Sept 31.1 °C 40 % 35 km/h 0.0 mm High 33
7 Sept 30.3 °C 38 % 41 km/h 0.1 mm High 35
8 Sept 24.7 °C 54 % 42 km/h 1.2 mm Moderate 16

Before and after, from space

Drag the line to compare the same ground before the fire and after it.

Before · 9 Aug 2026
After · 21 Sept 2026

If the day is cloudy, change the date: each satellite passes once a day. In false colour the burnt ground looks brown or red.

The smoke

CAMS · Copernicus

On 1 September 2026 the air beside the fire reached 127 µg/m³ of PM2.5. That day averaged 69: 4.6 times the WHO daily guideline (15).

PM2.5 peak127 µg/m³
Days over the guideline20 days
PM10129 µg/m³
Optical depth1.60
1415161718192021222324252627282930311234567891011121314151617
Good Fair Moderate Poor Very poor Extremely poor

Particles from the Copernicus CAMS model at the centre of the perimeter; these are not measurements in each town. The pale bar is the worst hour, the solid one the daily average.

Open-Meteo.com (CC BY 4.0) · Copernicus Atmosphere Monitoring Service (CAMS)

Detections table · 6,732Every satellite heat detection, one by one, with time, satellite, power and coordinates.
⬇ Download CSV Times in UTC. Each detection is a 375 m pixel: a large fire yields hundreds per pass.
Date and timeSatelliteFRP (MW)LatLon

Other fires nearby

All fires in Mozambique ›

Frequently asked questions

How long did the Mocuba fire last?
According to the heat detections seen by satellite inside the perimeter, it burned from 16 August 2026 to 14 September 2026 (30 days). The perimeter dates it from 21 August 2026 to 7 September 2026.
How much area did it burn?
The perimeter GWIS (Copernicus) rebuilt from heat detections is 141,123 hectares (1,411.2 km²). It is an estimate: official national figures may differ.
Which municipalities burned?
The fire entered 2 municipalities: Mocuba (104,889 ha, 12 %); Derre (37,113 ha, 7.8 %).
What was the weather like?
During the fire the temperature reached 35.7 °C, humidity dropped to 21 % and gusts hit 41 km/h. The fire danger index (FWI) reached 43, class Very high.
Where does this data come from?
From the GWIS (Copernicus) burnt perimeter, NASA FIRMS VIIRS hotspots and the administrative boundaries of Mozambique (geoBoundaries). It is not an official report.

Where to verify it

A satellite detection is not an official report. Final figures and the fire’s status are published by each country’s emergency service.

Satellite cross-check

History of this page Changes in area, dates, name, official record or merged pages, compared every night since 24 October 2026.

No changes since 24 October 2026.

RSS Changes to this page

Does something look wrong on this page?

This page is built from satellite data and official records, and it sometimes gets things wrong: the wrong dates, the wrong town, two fires merged into one, or something that was not a wildfire at all. If you know this fire first-hand (you live nearby, saw it, fought it or reported on it), tell us what really happened and we will check it.

Report an error
What do you think is wrong?

We will only use your email to reply about this report. Privacy.

How we know this
  • Perimeter: GWIS (Copernicus), rebuilt from heat detections rather than mapped on imagery; 11 polygons grouped in this page.
  • Dates adjusted with the VIIRS detections inside the perimeter, which said 21 August 2026 to 7 September 2026. 6,732 Suomi-NPP VIIRS detections on those dates.
  • We have not matched this page with any official record.
  • Weather: Copernicus ERA5 reanalysis at the fire location, in cells of about 25 km.
  • Built-up area and population come from the JRC Global Human Settlement Layer (epoch 2025, 100 m cells), summed inside the perimeter: an estimate of what was there, not a damage count.

How we build fire pages: methodology ›

Where this data comes from

The perimeter comes from the Copernicus Global Wildfire Information System (GWIS), which rebuilds it from MODIS and VIIRS heat detections and publishes it under CC BY 4.0. It is not measured on imagery as in Europe, so it is an estimate. Heat detections come from the VIIRS sensors aboard Suomi-NPP and NOAA-20, distributed by NASA FIRMS at 375 m resolution. Municipal boundaries come from geoBoundaries ADM2 (Creative Commons Attribution 3.0 Intergovernmental Organisations (CC BY 3.0 IGO)). The area per municipality is computed by WorldFires by crossing the perimeter with those boundaries, so it may differ from each country’s official figure.