Skip to content
worldfires
BW · Botswana · –

Ngwaketse Central fire, 4 August 2023 Ngwaketse Central

Out · last detection 7 Aug 2023, 12:51 UTC

The fire started on 4 August 2023 in Ngwaketse Central, Botswana, and satellites saw it burning for 4 days. Copernicus’s global GWIS system rebuilt a burnt perimeter of 4,776 hectares from heat detections, spread across a single municipality.

It is the 14th largest in Southern District since 2016 (of 76 with a page). Number 113 in Botswana in 2023, of 381.

Burnt area
4,776ha
GWIS perimeter (Copernicus)
Duration
4days
4 Aug 2023 – 7 Aug 2023
Municipalities hit
1
subdistricts
Started on
4 Aug
2023
Heat detections
140
in a single hotspot: 252 MW
Danger at start
43
Very high · FWI index
Average daily power
782MW
detected power per day, on average

Where it burned

HOTSPOTS BY DAY 4 Aug7 Aug
7 Aug 2023

How it evolved, day by day

4 Aug 2023 · 76 MW · 15 5 Aug 2023 · 811 MW · 66 6 Aug 2023 · 2,116 MW · 42 7 Aug 2023 · 124 MW · 17
4 Aug 5 Aug 6 Aug 7 Aug

Fire radiative power detected each day, in megawatts, and number of hotspots. The magenta bar marks the peak day.

The weather it burned in

26°high
40km/h · peak gust
12%lowest humidity

It had gone more than two months without rain (1 mm or more) when it started.

This area had burned before

No earlier perimeters overlap this fire since 2016, when the satellite record begins.

How big is it?

10 km
It burned the equivalent of 3% of the area of London (48 km² against 1,583 km²).

London boundary: geoBoundaries · Office for National Statistics (Open Government Licence v3.0).

This compares size, not location: both shapes are at the same scale, north up, centred on each other.

What happened to each town

  1. Ngwaketse Central where it started
    4,794 ha
    1.0 %

Burnt area inside each municipality, from crossing the GWIS perimeter with administrative boundaries. The distance runs from the point marking the centre of each area to the nearest fire: staying a kilometre away does not mean it reached the houses.

People and buildings inside the perimeter

GHSL 2025
Built-up area0.10 ha
Residents< 20

Inside the perimeter there were about 0.10 hectares of built-up land and almost nobody lived there (GHSL 2025, satellite-based estimate).

This is an estimate on 100 m cells, made from satellite imagery and census data: it does not mean that homes burned or that anyone was harmed. The perimeter also contains land that never burned. The GHSL 2025 epoch is a projection made from 2020 and earlier data.

Source: Global Human Settlement Layer (GHS-BUILT-S and GHS-POP R2023A), European Commission Joint Research Centre (JRC), © European Union, CC BY 4.0. Sum inside the perimeter computed by WorldFires. human-settlement.emergency.copernicus.eu

The weather day by day

ECMWF ERA5 reanalysis at the fire location, the standard reference for past weather, and the Canadian Fire Weather Index (the same system Copernicus uses), computed by WorldFires from that data. Days after the fire run until the first rain.

Open-Meteo.com (CC BY 4.0) · Copernicus Climate Change Service (ERA5)

Started with 60 days without rain: 71 % of the area in Botswana

Day High Min. humidity Peak gust Rain Danger (FWI)
4 Aug 20.8 °C 22 % 40 km/h 0.0 mm Very high 43
5 Aug 22.1 °C 22 % 33 km/h 0.0 mm Very high 40
6 Aug 23.3 °C 17 % 31 km/h 0.0 mm Very high 43
7 Aug 25.8 °C 12 % 23 km/h 0.0 mm Very high 41
8 Aug after 26.4 °C 12 % 27 km/h 0.0 mm Extreme 51
9 Aug after 25.0 °C 18 % 37 km/h 0.0 mm Extreme 62
10 Aug after 22.1 °C 26 % 46 km/h 0.0 mm Extreme 55
11 Aug after 23.6 °C 27 % 45 km/h 0.0 mm Extreme 52
12 Aug after 25.8 °C 25 % 34 km/h 0.0 mm Very high 43
13 Aug after 28.3 °C 19 % 43 km/h 0.0 mm Extreme 63
14 Aug after 29.9 °C 15 % 50 km/h 0.0 mm Very extreme 73
15 Aug after 30.1 °C 8 % 27 km/h 0.0 mm Very high 48
16 Aug after 29.7 °C 15 % 49 km/h 0.0 mm Very extreme 90
17 Aug after 27.7 °C 24 % 46 km/h 0.0 mm Extreme 63

Its twins: fires that started in the same weather

It started with an FWI of 43.2, a minimum humidity of 22% and more than two months without rain. Fires in the area that started in weather like this since 2017: 16.

FWI at the start 43.2
Minimum humidity 22 %
Days without rain 60+
this fire chosen twins rest of the area
Almost identicalSimilar

Outlines of the closest twins

Ramotshere Moiloa fire, August 2021
2,600 ha 3 days FWI 43.6 Min. humidity 23 % 180 km away, in 2021

First rain (1 mm or more) after it ended: none in the following ten days.

What happened to them

5 days
median duration
3,068 ha
median area
100 %
went past 1,000 ha
—
rain at the end (median; 0 of 16 had it)

It was 1.6 times larger than the median of its twins and lasted 4 days, against 5 days.

Only 4 of its 16 twins burned more. The weather on the first day does not explain everything: the wind in the following days, the fuel and the firefighting also count. In none of them did 1 mm fall in the ten days after the end: they all went out without rain.

This is a bank of analogues: it shows what usually happens, not what will happen. With fewer than 15 twins we give no figures. How we calculate it

How it ended

—first rain
—no rain in ten days
40km/h · max. gust

It was considered over on 7 Aug, and not even 1 mm fell in the following ten days: it went out without rain. None of its 16 twins had rain when they ended.

Weather on this page: Open-Meteo.com (CC BY 4.0) · Copernicus Climate Change Service (ERA5)

How a twin is chosen

  • Same area: fires that have already ended, less than 250 km from this one, since 2017.
  • Same start: we compare the FWI on the first day, the minimum humidity that day and the run of days without rain before it. The slider sets how much they may differ.
  • Only pages with final weather data (ERA5 reanalysis) calculated in the same way as this fire’s; agricultural and grass burns and pages with data under review are left out.
  • Fires burning at the same time as this one (a week before or after) are left out: they share the same spell of weather and do not count as a precedent.
  • They are sorted by similarity, and the outlines of the first five are drawn.

How we calculate it

Before and after, from space

Drag the line to compare the same ground before the fire and after it.

Before · 28 Jul 2023
After · 14 Aug 2023

If the day is cloudy, change the date: each satellite passes once a day. In false colour the burnt ground looks brown or red.

The smoke

CAMS · Copernicus

On 6 August 2023 the air beside the fire reached 23 µg/m³ of PM2.5, but no daily average passed the WHO guideline (15).

PM2.5 peak23 µg/m³
Days over the guideline0 days
PM1033 µg/m³
Optical depth0.21
3 Aug5 Aug7 Aug9 Aug
Good Fair Moderate Poor Very poor Extremely poor

Particles from the Copernicus CAMS model at the centre of the perimeter; these are not measurements in each town. The pale bar is the worst hour, the solid one the daily average.

Open-Meteo.com (CC BY 4.0) · Copernicus Atmosphere Monitoring Service (CAMS)

Detections table · 140Every satellite heat detection, one by one, with time, satellite, power and coordinates.
⬇ Download CSV Times in UTC. Each detection is a 375 m pixel: a large fire yields hundreds per pass.
Date and timeSatelliteFRP (MW)LatLon

Other fires nearby

All fires in Botswana

Frequently asked questions

How long did the Ngwaketse Central fire last?
According to the heat detections seen by satellite inside the perimeter, it burned from 4 August 2023 to 7 August 2023 (4 days). The perimeter dates it from 5 August 2023 to 7 August 2023.
How much area did it burn?
The perimeter GWIS (Copernicus) rebuilt from heat detections is 4,776 hectares (47.8 km²). It is an estimate: official national figures may differ.
Which municipalities burned?
The fire only entered Ngwaketse Central (4,794 ha, 1.0 %).
What was the weather like?
During the fire the temperature reached 25.8 °C, humidity dropped to 12 % and gusts hit 40 km/h. The fire danger index (FWI) reached 43, class Very high.
Where does this data come from?
From the GWIS (Copernicus) burnt perimeter, NASA FIRMS VIIRS hotspots and the administrative boundaries of Botswana (geoBoundaries). It is not an official report.
How did the fires that started in similar weather in this area end?
Fires less than 250 km away that started since 2017 with a similar FWI, humidity and dry spell: 16. Their median duration was 5 days and their median area 3,068 ha; 100 % went past 1,000 ha. Only 4 of its 16 twins burned more. The weather on the first day does not explain everything: the wind in the following days, the fuel and the firefighting also count. In none of them did 1 mm fall in the ten days after the end: they all went out without rain.

Where to verify it

A satellite detection is not an official report. Final figures and the fire’s status are published by each country’s emergency service.

Satellite cross-check

History of this page · 1 Changes in area, dates, name, official record or merged pages, compared every night since 24 October 2026.
  1. Start date: 5 August 2023 → 4 August 2023.

RSS Changes to this page With cross-checks and a citable version

Does something look wrong on this page?

This page is built from satellite data and official records, and it sometimes gets things wrong: the wrong dates, the wrong town, two fires merged into one, or something that was not a wildfire at all. If you know this fire first-hand (you live nearby, saw it, fought it or reported on it), tell us what really happened and we will check it.

Report an error
What do you think is wrong?

We will only use your email to reply about this report. Privacy.

How we know this
  • Perimeter: GWIS (Copernicus), rebuilt from heat detections rather than mapped on imagery.
  • Dates adjusted with the VIIRS detections inside the perimeter, which said 5 August 2023 to 7 August 2023. 140 Suomi-NPP VIIRS detections on those dates.
  • We have not matched this page with any official record.
  • Weather: Copernicus ERA5 reanalysis at the fire location, in cells of about 25 km.
  • Built-up area and population come from the JRC Global Human Settlement Layer (epoch 2025, 100 m cells), summed inside the perimeter: an estimate of what was there, not a damage count.

How we build fire pages: methodology

Where this data comes from

The perimeter comes from the Copernicus Global Wildfire Information System (GWIS), which rebuilds it from MODIS and VIIRS heat detections and publishes it under CC BY 4.0. It is not measured on imagery as in Europe, so it is an estimate. Heat detections come from the VIIRS sensors aboard Suomi-NPP and NOAA-20, distributed by NASA FIRMS at 375 m resolution. Municipal boundaries come from geoBoundaries ADM2 (Public Domain). The area per municipality is computed by WorldFires by crossing the perimeter with those boundaries, so it may differ from each country’s official figure.