Skip to content
worldfires
BW · Botswana · –

Ngamiland West fire, 10 December 2018 Ngamiland West

Out · last detection 23 Dec 2018, 12:02 UTC

The fire started on 10 December 2018 in Ngamiland West, Botswana, and satellites saw it burning for 14 days. Copernicus’s global GWIS system rebuilt a burnt perimeter of 4,087 hectares from heat detections, spread across a single municipality.

It is the 219th largest in North-West District since 2016 (of 516 with a page). Number 41 in Botswana in 2018, of 93.

Burnt area
4,087ha
GWIS perimeter (Copernicus)
Duration
14days
10 Dec 2018 – 23 Dec 2018
Municipalities hit
1
subdistricts
Started on
10 Dec
2018
Heat detections
143
in a single hotspot: 63 MW
Danger at start
33
High · FWI index
Average daily power
253MW
detected power per day, on average

Where it burned

HOTSPOTS BY DAY 10 Dec23 Dec
23 Dec 2018

How it evolved, day by day

10 Dec 2018 · 11 MW · 1 12 Dec 2018 · 69 MW · 14 13 Dec 2018 · 615 MW · 22 14 Dec 2018 · 895 MW · 45 15 Dec 2018 · 803 MW · 47 16 Dec 2018 · 105 MW · 8 17 Dec 2018 · 2 MW · 1 19 Dec 2018 · 11 MW · 3 20 Dec 2018 · 3 MW · 1 23 Dec 2018 · 14 MW · 1
10 Dec 14 Dec 17 Dec 20 Dec

Fire radiative power detected each day, in megawatts, and number of hotspots. The magenta bar marks the peak day.

The weather it burned in

38°high
44km/h · peak gust
12%lowest humidity

It had gone 4 days without rain (1 mm or more) when it started. Rain came after the fire: 1.7 mm on 27 Dec.

This area had burned before

20% of the perimeter overlaps earlier fires recorded since 2016: 810 ha in 2017.

How big is it?

10 km
It burned the equivalent of 2.6% of the area of London (41 km² against 1,583 km²).

London boundary: geoBoundaries · Office for National Statistics (Open Government Licence v3.0).

This compares size, not location: both shapes are at the same scale, north up, centred on each other.

What happened to each town

  1. Ngamiland West where it started
    4,090 ha
    0.1 %

Burnt area inside each municipality, from crossing the GWIS perimeter with administrative boundaries. The distance runs from the point marking the centre of each area to the nearest fire: staying a kilometre away does not mean it reached the houses.

People and buildings inside the perimeter

GHSL 2020
Built-up area0.11 ha
Residents< 20

Inside the perimeter there were about 0.11 hectares of built-up land and almost nobody lived there (GHSL 2020, satellite-based estimate).

This is an estimate on 100 m cells, made from satellite imagery and census data: it does not mean that homes burned or that anyone was harmed. The perimeter also contains land that never burned.

Source: Global Human Settlement Layer (GHS-BUILT-S and GHS-POP R2023A), European Commission Joint Research Centre (JRC), © European Union, CC BY 4.0. Sum inside the perimeter computed by WorldFires. human-settlement.emergency.copernicus.eu

The weather day by day

ECMWF ERA5 reanalysis at the fire location, the standard reference for past weather, and the Canadian Fire Weather Index (the same system Copernicus uses), computed by WorldFires from that data. Days after the fire run until the first rain.

Open-Meteo.com (CC BY 4.0) · Copernicus Climate Change Service (ERA5)

Started with Very dry air: 63 % of the area in Botswana

Day High Min. humidity Peak gust Rain Danger (FWI)
10 Dec 37.1 °C 12 % 31 km/h 0.0 mm High 33
11 Dec 36.5 °C 16 % 29 km/h 0.0 mm Extreme 52
12 Dec 36.1 °C 19 % 42 km/h 0.0 mm Extreme 52
13 Dec 37.7 °C 13 % 44 km/h 0.0 mm Very extreme 71
14 Dec 38.3 °C 13 % 41 km/h 0.0 mm Extreme 64
15 Dec 36.7 °C 18 % 41 km/h 0.0 mm Very extreme 70
16 Dec 36.7 °C 21 % 40 km/h 0.0 mm Extreme 64
17 Dec 35.4 °C 24 % 41 km/h 0.0 mm Extreme 57
18 Dec 37.7 °C 19 % 28 km/h 0.0 mm Very high 47
19 Dec 36.2 °C 26 % 35 km/h 0.5 mm Very high 47
20 Dec 36.6 °C 28 % 33 km/h 3.8 mm High 37
21 Dec 33.2 °C 33 % 32 km/h 0.2 mm Moderate 17
22 Dec 34.9 °C 27 % 35 km/h 0.0 mm Very high 38
23 Dec 36.5 °C 23 % 32 km/h 0.0 mm Very high 44
24 Dec after 37.3 °C 26 % 35 km/h 0.9 mm Very high 39
25 Dec after 34.0 °C 34 % 36 km/h 0.5 mm High 26
26 Dec after 34.7 °C 34 % 43 km/h 0.5 mm High 33
27 Dec after 36.3 °C 28 % 28 km/h 1.7 mm High 34

Its twins: fires that started in the same weather

It started with an FWI of 33.1, a minimum humidity of 12% and 4 days without rain. Fires in the area that started in weather like this since 2016: 29.

FWI at the start 33.1
Minimum humidity 12 %
Days without rain 4
this fire chosen twins rest of the area
Almost identicalSimilar

Outlines of the closest twins

Chobe fire, November 2017
6,438 ha 2 days FWI 32.5 Min. humidity 12 % 214 km away, in 2017

First rain (1 mm or more) after it ended: 3.1 mm on 22 Nov.

What happened to them

10 days
median duration
3,265 ha
median area
14 %
went past 10,000 ha
2.5 mm
rain at the end (median; 21 of 29 had it)

It burned an area similar to its twins (4,087 ha against a median of 3,265 ha) and lasted 14 days, against 10 days.

In 8 of 29, not even 1 mm fell in the ten days after the end: they went out without rain. In the rest, the first rainy day brought a median of 2.5 mm.

This is a bank of analogues: it shows what usually happens, not what will happen. With fewer than 15 twins we give no figures. How we calculate it

How it ended

1.7 mmfirst rain
27 Dec4 days after it ended
44km/h · max. gust

It was considered over on 23 Dec, and on 27 Dec 1.7 mm fell. We do not know whether the rain or the firefighters put it out. Twins with rain when they ended: 21 of 29, with a median of 2.5 mm.

Weather on this page: Open-Meteo.com (CC BY 4.0) · Copernicus Climate Change Service (ERA5)

How a twin is chosen

  • Same area: fires that have already ended, less than 250 km from this one, since 2016.
  • Same start: we compare the FWI on the first day, the minimum humidity that day and the run of days without rain before it. The slider sets how much they may differ.
  • Only pages with final weather data (ERA5 reanalysis) calculated in the same way as this fire’s; agricultural and grass burns and pages with data under review are left out.
  • Fires burning at the same time as this one (a week before or after) are left out: they share the same spell of weather and do not count as a precedent.
  • They are sorted by similarity, and the outlines of the first five are drawn.

How we calculate it

Before and after, from space

Drag the line to compare the same ground before the fire and after it.

Before · 3 Dec 2018
After · 30 Dec 2018

If the day is cloudy, change the date: each satellite passes once a day. In false colour the burnt ground looks brown or red.

Detections table · 143Every satellite heat detection, one by one, with time, satellite, power and coordinates.
⬇ Download CSV Times in UTC. Each detection is a 375 m pixel: a large fire yields hundreds per pass.
Date and timeSatelliteFRP (MW)LatLon

Other fires nearby

All fires in Botswana

Frequently asked questions

How long did the Ngamiland West fire last?
According to the heat detections seen by satellite inside the perimeter, it burned from 10 December 2018 to 23 December 2018 (14 days). The perimeter dates it from 12 December 2018 to 16 December 2018.
How much area did it burn?
The perimeter GWIS (Copernicus) rebuilt from heat detections is 4,087 hectares (40.9 km²). It is an estimate: official national figures may differ.
Which municipalities burned?
The fire only entered Ngamiland West (4,090 ha, 0.1 %).
What was the weather like?
During the fire the temperature reached 38.3 °C, humidity dropped to 12 % and gusts hit 44 km/h. The fire danger index (FWI) reached 71, class Very extreme.
Where does this data come from?
From the GWIS (Copernicus) burnt perimeter, NASA FIRMS VIIRS hotspots and the administrative boundaries of Botswana (geoBoundaries). It is not an official report.
How did the fires that started in similar weather in this area end?
Fires less than 250 km away that started since 2016 with a similar FWI, humidity and dry spell: 29. Their median duration was 10 days and their median area 3,265 ha; 14 % went past 10,000 ha. In 8 of 29, not even 1 mm fell in the ten days after the end: they went out without rain. In the rest, the first rainy day brought a median of 2.5 mm.

Where to verify it

A satellite detection is not an official report. Final figures and the fire’s status are published by each country’s emergency service.

Satellite cross-check

History of this page · 2 Changes in area, dates, name, official record or merged pages, compared every night since 24 October 2026.
  1. Last day with fire: 16 December 2018 → 23 December 2018.
  2. Start date: 12 December 2018 → 10 December 2018.

RSS Changes to this page With cross-checks and a citable version

Does something look wrong on this page?

This page is built from satellite data and official records, and it sometimes gets things wrong: the wrong dates, the wrong town, two fires merged into one, or something that was not a wildfire at all. If you know this fire first-hand (you live nearby, saw it, fought it or reported on it), tell us what really happened and we will check it.

Report an error
What do you think is wrong?

We will only use your email to reply about this report. Privacy.

How we know this
  • Perimeter: GWIS (Copernicus), rebuilt from heat detections rather than mapped on imagery.
  • Dates adjusted with the VIIRS detections inside the perimeter, which said 12 December 2018 to 16 December 2018. 143 Suomi-NPP VIIRS detections on those dates.
  • We have not matched this page with any official record.
  • Weather: Copernicus ERA5 reanalysis at the fire location, in cells of about 25 km.
  • Built-up area and population come from the JRC Global Human Settlement Layer (epoch 2020, 100 m cells), summed inside the perimeter: an estimate of what was there, not a damage count.

How we build fire pages: methodology

Where this data comes from

The perimeter comes from the Copernicus Global Wildfire Information System (GWIS), which rebuilds it from MODIS and VIIRS heat detections and publishes it under CC BY 4.0. It is not measured on imagery as in Europe, so it is an estimate. Heat detections come from the VIIRS sensors aboard Suomi-NPP and NOAA-20, distributed by NASA FIRMS at 375 m resolution. Municipal boundaries come from geoBoundaries ADM2 (Public Domain). The area per municipality is computed by WorldFires by crossing the perimeter with those boundaries, so it may differ from each country’s official figure.