Skip to content
worldfires
BW · Botswana · –

Ngamiland West fire, 24 September 2016 Ngamiland West

Out · last detection 2 Oct 2016, 12:27 UTC

The fire started on 24 September 2016 in Ngamiland West, Botswana, and satellites saw it burning for 9 days. Copernicus’s global GWIS system rebuilt a burnt perimeter of 12,105 hectares from heat detections, spread across a single municipality.

It is the 53th largest in North-West District since 2016 (of 516 with a page). Number 4 in Botswana in 2016, of 76.

Burnt area
12,105ha
GWIS perimeter (Copernicus)
Duration
9days
24 Sept 2016 – 2 Oct 2016
Municipalities hit
1
subdistricts
Started on
24 Sept
2016
Heat detections
383
in a single hotspot: 143 MW
Danger at start
58
Extreme · FWI index
Average daily power
740MW
detected power per day, on average

Where it burned

HOTSPOTS BY DAY 24 Sept2 Oct
2 Oct 2016

How it evolved, day by day

24 Sept 2016 · 704 MW · 18 25 Sept 2016 · 1,977 MW · 117 26 Sept 2016 · 1,425 MW · 131 27 Sept 2016 · 2,268 MW · 75 28 Sept 2016 · 114 MW · 24 29 Sept 2016 · 26 MW · 2 30 Sept 2016 · 107 MW · 9 1 Oct 2016 · 9 MW · 2 2 Oct 2016 · 30 MW · 5
24 Sept 27 Sept 30 Sept 2 Oct

Fire radiative power detected each day, in megawatts, and number of hotspots. The magenta bar marks the peak day.

The weather it burned in

37°high
55km/h · peak gust
10%lowest humidity

It had gone more than two months without rain (1 mm or more) when it started.

This area had burned before

No earlier perimeters overlap this fire since 2016, when the satellite record begins.

How big is it?

10 km
It burned the equivalent of 7.6% of the area of London (121 km² against 1,583 km²).

London boundary: geoBoundaries · Office for National Statistics (Open Government Licence v3.0).

This compares size, not location: both shapes are at the same scale, north up, centred on each other.

What happened to each town

  1. Ngamiland West where it started
    12,081 ha
    0.2 %

Burnt area inside each municipality, from crossing the GWIS perimeter with administrative boundaries. The distance runs from the point marking the centre of each area to the nearest fire: staying a kilometre away does not mean it reached the houses.

People and buildings inside the perimeter

GHSL 2015
Built-up area< 0.1 ha
Residents< 20

Inside the perimeter there was no noticeable built-up land and almost nobody lived there (GHSL 2015, satellite-based estimate).

This is an estimate on 100 m cells, made from satellite imagery and census data: it does not mean that homes burned or that anyone was harmed. The perimeter also contains land that never burned.

Source: Global Human Settlement Layer (GHS-BUILT-S and GHS-POP R2023A), European Commission Joint Research Centre (JRC), © European Union, CC BY 4.0. Sum inside the perimeter computed by WorldFires. human-settlement.emergency.copernicus.eu

The weather day by day

ECMWF ERA5 reanalysis at the fire location, the standard reference for past weather, and the Canadian Fire Weather Index (the same system Copernicus uses), computed by WorldFires from that data. Days after the fire run until the first rain.

Open-Meteo.com (CC BY 4.0) · Copernicus Climate Change Service (ERA5)

Started with Extreme FWI: 81 % of the area in Botswana Very dry air: 63 % of the area in Botswana 60 days without rain: 71 % of the area in Botswana

Day High Min. humidity Peak gust Rain Danger (FWI)
24 Sept 36.6 °C 10 % 30 km/h 0.0 mm Extreme 58
25 Sept 36.2 °C 11 % 35 km/h 0.0 mm Extreme 70
26 Sept 36.1 °C 10 % 55 km/h 0.0 mm Very extreme 98
27 Sept 35.7 °C 10 % 45 km/h 0.0 mm Very extreme 80
28 Sept 35.4 °C 13 % 35 km/h 0.0 mm Extreme 65
29 Sept 36.4 °C 12 % 38 km/h 0.0 mm Very extreme 73
30 Sept 36.2 °C 13 % 43 km/h 0.0 mm Very extreme 79
1 Oct 37.4 °C 12 % 38 km/h 0.0 mm Extreme 67
2 Oct 36.8 °C 14 % 36 km/h 0.0 mm Extreme 58
3 Oct after 34.3 °C 19 % 37 km/h 0.0 mm Extreme 63
4 Oct after 33.4 °C 19 % 38 km/h 0.0 mm Extreme 55
5 Oct after 34.5 °C 11 % 39 km/h 0.0 mm Extreme 54
6 Oct after 36.0 °C 10 % 35 km/h 0.0 mm Extreme 59
7 Oct after 38.3 °C 8 % 40 km/h 0.0 mm Very extreme 76
8 Oct after 37.3 °C 12 % 56 km/h 0.0 mm Very extreme 83
9 Oct after 34.7 °C 19 % 35 km/h 0.0 mm Very high 48
10 Oct after 37.3 °C 9 % 35 km/h 0.0 mm Extreme 65
11 Oct after 38.0 °C 14 % 44 km/h 0.0 mm Very extreme 75
12 Oct after 37.9 °C 13 % 40 km/h 0.0 mm Very extreme 73

Its twins: fires that started in the same weather

It started with an FWI of 58.3, a minimum humidity of 10% and more than two months without rain. Fires in the area that started in weather like this since 2016: 25.

FWI at the start 58.3
Minimum humidity 10 %
Days without rain 60+
this fire chosen twins rest of the area
Almost identicalSimilar

Outlines of the closest twins

Ngamiland West fire, September 2023
3,683 ha 8 days FWI 58.1 Min. humidity 10 % 28 km away, in 2023

First rain (1 mm or more) after it ended: none in the following ten days.

What happened to them

8 days
median duration
3,683 ha
median area
20 %
went past 10,000 ha
1.3 mm
rain at the end (median; 3 of 25 had it)

It was 3.3 times larger than the median of its twins and lasted 9 days, against 8 days.

Only 1 of its 25 twins burned more. The weather on the first day does not explain everything: the wind in the following days, the fuel and the firefighting also count. In 22 of 25, not even 1 mm fell in the ten days after the end: they went out without rain. In the rest, the first rainy day brought a median of 1.3 mm.

This is a bank of analogues: it shows what usually happens, not what will happen. With fewer than 15 twins we give no figures. How we calculate it

How it ended

—first rain
—no rain in ten days
55km/h · max. gust

It was considered over on 2 Oct, and not even 1 mm fell in the following ten days: it went out without rain. Twins with rain when they ended: 3 of 25, with a median of 1.3 mm.

Weather on this page: Open-Meteo.com (CC BY 4.0) · Copernicus Climate Change Service (ERA5)

How a twin is chosen

  • Same area: fires that have already ended, less than 250 km from this one, since 2016.
  • Same start: we compare the FWI on the first day, the minimum humidity that day and the run of days without rain before it. The slider sets how much they may differ.
  • Only pages with final weather data (ERA5 reanalysis) calculated in the same way as this fire’s; agricultural and grass burns and pages with data under review are left out.
  • Fires burning at the same time as this one (a week before or after) are left out: they share the same spell of weather and do not count as a precedent.
  • They are sorted by similarity, and the outlines of the first five are drawn.

How we calculate it

Before and after, from space

Drag the line to compare the same ground before the fire and after it.

Before · 17 Sept 2016
After · 9 Oct 2016

If the day is cloudy, change the date: each satellite passes once a day. In false colour the burnt ground looks brown or red.

Detections table · 383Every satellite heat detection, one by one, with time, satellite, power and coordinates.
⬇ Download CSV Times in UTC. Each detection is a 375 m pixel: a large fire yields hundreds per pass.
Date and timeSatelliteFRP (MW)LatLon

Other fires nearby

All fires in Botswana

Frequently asked questions

How long did the Ngamiland West fire last?
According to the heat detections seen by satellite inside the perimeter, it burned from 24 September 2016 to 2 October 2016 (9 days). The perimeter dates it from 24 September 2016 to 27 September 2016.
How much area did it burn?
The perimeter GWIS (Copernicus) rebuilt from heat detections is 12,105 hectares (121.0 km²). It is an estimate: official national figures may differ.
Which municipalities burned?
The fire only entered Ngamiland West (12,081 ha, 0.2 %).
What was the weather like?
During the fire the temperature reached 37.4 °C, humidity dropped to 10 % and gusts hit 55 km/h. The fire danger index (FWI) reached 98, class Very extreme.
Where does this data come from?
From the GWIS (Copernicus) burnt perimeter, NASA FIRMS VIIRS hotspots and the administrative boundaries of Botswana (geoBoundaries). It is not an official report.
How did the fires that started in similar weather in this area end?
Fires less than 250 km away that started since 2016 with a similar FWI, humidity and dry spell: 25. Their median duration was 8 days and their median area 3,683 ha; 20 % went past 10,000 ha. Only 1 of its 25 twins burned more. The weather on the first day does not explain everything: the wind in the following days, the fuel and the firefighting also count. In 22 of 25, not even 1 mm fell in the ten days after the end: they went out without rain. In the rest, the first rainy day brought a median of 1.3 mm.

Where to verify it

A satellite detection is not an official report. Final figures and the fire’s status are published by each country’s emergency service.

Satellite cross-check

History of this page · 1 Changes in area, dates, name, official record or merged pages, compared every night since 24 October 2026.
  1. Last day with fire: 27 September 2016 → 2 October 2016.

RSS Changes to this page With cross-checks and a citable version

Does something look wrong on this page?

This page is built from satellite data and official records, and it sometimes gets things wrong: the wrong dates, the wrong town, two fires merged into one, or something that was not a wildfire at all. If you know this fire first-hand (you live nearby, saw it, fought it or reported on it), tell us what really happened and we will check it.

Report an error
What do you think is wrong?

We will only use your email to reply about this report. Privacy.

How we know this
  • Perimeter: GWIS (Copernicus), rebuilt from heat detections rather than mapped on imagery.
  • Dates adjusted with the VIIRS detections inside the perimeter, which said 24 September 2016 to 27 September 2016. 383 Suomi-NPP VIIRS detections on those dates.
  • We have not matched this page with any official record.
  • Weather: Copernicus ERA5 reanalysis at the fire location, in cells of about 25 km.
  • Built-up area and population come from the JRC Global Human Settlement Layer (epoch 2015, 100 m cells), summed inside the perimeter: an estimate of what was there, not a damage count.

How we build fire pages: methodology

Where this data comes from

The perimeter comes from the Copernicus Global Wildfire Information System (GWIS), which rebuilds it from MODIS and VIIRS heat detections and publishes it under CC BY 4.0. It is not measured on imagery as in Europe, so it is an estimate. Heat detections come from the VIIRS sensors aboard Suomi-NPP and NOAA-20, distributed by NASA FIRMS at 375 m resolution. Municipal boundaries come from geoBoundaries ADM2 (Public Domain). The area per municipality is computed by WorldFires by crossing the perimeter with those boundaries, so it may differ from each country’s official figure.