Nenjiang County fire, 25 October 2026 嫩江市 · Nenjiang County, Oroqen Autonomous Banner
The fire started on 25 October 2026 in Nenjiang County, China, and satellites saw it burning for 1 day. Copernicus’s global GWIS system rebuilt a burnt perimeter of 2,254 hectares from heat detections, spread across 2 municipalities.
It is the 534th largest in Heilongjiang Province since 2016 (of 1854 with a page). Number 349 in China in 2026, of 999.
- Burnt area
- 2,254ha
- GWIS perimeter (Copernicus)
- Duration
- 1day
- 25 Oct 2026 – 25 Oct 2026
- Municipalities hit
- 2
- counties
- Started on
- 25 Oct
- 2026
- Heat detections
- 37
- in a single hotspot: 109 MW
- Danger at start
- 5
- Very low · FWI index
- Average daily power
- 767MW
- detected power per day, on average
Where it burned
How it evolved, day by day
25 Oct 2026 · 767 MW · 37
Fire radiative power detected each day, in megawatts, and number of hotspots. The magenta bar marks the peak day.
The weather it burned in
It had gone 6 days without rain (1 mm or more) when it started. Rain came after the fire: 3.5 mm on 29 Oct.
This area had burned before
54% of the perimeter overlaps earlier fires recorded since 2016: 244 ha in 2017, 364 ha in 2022, 872 ha in 2023, 31 ha in 2024, 60 ha in 2025. Part of it burned more than once, so the yearly figures add up to more than the 1,228 ha that had burned before.
How big is it?
London boundary: geoBoundaries · Office for National Statistics (Open Government Licence v3.0).
Beijing (Dongcheng and Xicheng) boundary: geoBoundaries · Lee Beryman, OpenStreetMap · © OpenStreetMap contributors (ODbL 1.0).
Paris boundary: geoBoundaries · Institut national de l'information géographique et forestière (IGN-F) (Etalab Open License 2.0).
Madrid boundary: geoBoundaries · Open Data ESRI, IGN Central Registry of Cartography Area (CC BY 4.0).
This compares size, not location: both shapes are at the same scale, north up, centred on each other.
What happened to each town
-
2,099 ha reached on 25 Oct0.1 %
-
Oroqen Autonomous Banner 鄂伦春自治旗193 ha reached on 25 Oct0.0 %
Burnt area inside each municipality, from crossing the GWIS perimeter with administrative boundaries. The distance runs from the point marking the centre of each area to the nearest fire: staying a kilometre away does not mean it reached the houses.
People and buildings inside the perimeter
GHSL 2025Inside the perimeter there was no noticeable built-up land and almost nobody lived there (GHSL 2025, satellite-based estimate).
This is an estimate on 100 m cells, made from satellite imagery and census data: it does not mean that homes burned or that anyone was harmed. The perimeter also contains land that never burned. The GHSL 2025 epoch is a projection made from 2020 and earlier data.
Source: Global Human Settlement Layer (GHS-BUILT-S and GHS-POP R2023A), European Commission Joint Research Centre (JRC), © European Union, CC BY 4.0. Sum inside the perimeter computed by WorldFires. human-settlement.emergency.copernicus.eu
The weather day by day
ECMWF ERA5 reanalysis at the fire location, the standard reference for past weather, and the Canadian Fire Weather Index (the same system Copernicus uses), computed by WorldFires from that data. Days after the fire run until the first rain.
Open-Meteo.com (CC BY 4.0) · forecast models, provisional until the ERA5 reanalysis arrives
| Day | High | Min. humidity | Peak gust | Rain | Danger (FWI) |
|---|---|---|---|---|---|
| 25 Oct | 3.3 °C | 27 % | 46 km/h | 0.0 mm | Very low 5 |
| 26 Oct after | 1.8 °C | 26 % | 35 km/h | 0.0 mm | Very low 4 |
| 27 Oct after | -1.0 °C | 28 % | 47 km/h | 0.4 mm | Very low 5 |
| 28 Oct after | -2.6 °C | 21 % | 32 km/h | 0.0 mm | Very low 4 |
| 29 Oct after | -1.3 °C | 48 % | 38 km/h | 3.5 mm | Very low 0 |
Before and after, from space
Drag the line to compare the same ground before the fire and after it.
If the day is cloudy, change the date: each satellite passes once a day. In false colour the burnt ground looks brown or red.
The smoke
CAMS · CopernicusOn 25 October 2026 the air beside the fire reached 58 µg/m³ of PM2.5. That day averaged 21: 1.4 times the WHO daily guideline (15).
Particles from the Copernicus CAMS model at the centre of the perimeter; these are not measurements in each town. The pale bar is the worst hour, the solid one the daily average.
Open-Meteo.com (CC BY 4.0) · Copernicus Atmosphere Monitoring Service (CAMS)
Detections table · 37Every satellite heat detection, one by one, with time, satellite, power and coordinates.
| Date and time | Satellite | FRP (MW) | Lat | Lon |
|---|
Other fires nearby
- 1,812 haNenjiang County 嫩江市28 October 2022 · 2 days · 17 km away
- 2,608 haOroqen Autonomous Banner 鄂伦春自治旗28 October 2022 · 2 days · 20 km away
- 2,112 haOroqen Autonomous Banner 鄂伦春自治旗24 October 2023 · 5 days · 24 km away
- 1,920 haOroqen Autonomous Banner 鄂伦春自治旗25 October 2023 · 3 days · 24 km away
- 1,470 haNenjiang County 嫩江市 25 October 2026 · 2 days · 30 km away
- 2,093 haOroqen Autonomous Banner 鄂伦春自治旗16 October 2026 · 1 day · 37 km away
Frequently asked questions
- How long did the Nenjiang County fire last?
- GWIS (Copernicus) dates it between 25 October 2026 and 25 October 2026: 1 day between the first and last heat detection of the perimeter.
- How much area did it burn?
- The perimeter GWIS (Copernicus) rebuilt from heat detections is 2,254 hectares (22.5 km²). It is an estimate: official national figures may differ.
- Which municipalities burned?
- The fire entered 2 municipalities: Nenjiang County (2,099 ha, 0.1 %); Oroqen Autonomous Banner (193 ha, 0.0 %).
- Is the Nenjiang County fire still active?
- No fire detections since 25 Oct 2026, 05:29 UTC. A lack of detections is not an official extinction.
- What was the weather like?
- During the fire the temperature reached 3.3 °C, humidity dropped to 27 % and gusts hit 46 km/h. The fire danger index (FWI) reached 5, class Very low.
- Where does this data come from?
- From the GWIS (Copernicus) burnt perimeter, NASA FIRMS VIIRS hotspots and the administrative boundaries of China (geoBoundaries). It is not an official report.
Where to verify it
A satellite detection is not an official report. Final figures and the fire’s status are published by each country’s emergency service.
Emergency number: 119 · Emergency number and official warnings ›
Satellite cross-check
History of this page · 1 Changes in area, dates, name, official record or merged pages, compared every night since 26 October 2026.
- Page published (2,254 ha).
Does something look wrong on this page?
This page is built from satellite data and official records, and it sometimes gets things wrong: the wrong dates, the wrong town, two fires merged into one, or something that was not a wildfire at all. If you know this fire first-hand (you live nearby, saw it, fought it or reported on it), tell us what really happened and we will check it.
Report an error
How we know this
- Perimeter: GWIS (Copernicus), rebuilt from heat detections rather than mapped on imagery.
- Dates from the perimeter: the VIIRS detections inside it did not change them. 37 Suomi-NPP VIIRS detections on those dates.
- We have not matched this page with any official record.
- Weather: ECMWF IFS model, provisional until the ERA5 reanalysis arrives.
- Built-up area and population come from the JRC Global Human Settlement Layer (epoch 2025, 100 m cells), summed inside the perimeter: an estimate of what was there, not a damage count.
Where this data comes from
The perimeter comes from the Copernicus Global Wildfire Information System (GWIS), which rebuilds it from MODIS and VIIRS heat detections and publishes it under CC BY 4.0. It is not measured on imagery as in Europe, so it is an estimate. Heat detections come from the VIIRS sensors aboard Suomi-NPP and NOAA-20, distributed by NASA FIRMS at 375 m resolution. Municipal boundaries come from geoBoundaries ADM3 (Open Data Commons Open Database License 1.0). The area per municipality is computed by WorldFires by crossing the perimeter with those boundaries, so it may differ from each country’s official figure.