Skip to content
worldfires
MZ · Mozambique · –

Namarrói fire, 19 September 2022 Lugela, Namarrói, Molumbo

Out · last detection 6 Nov 2022, 11:50 UTC

The fire started on 19 September 2022 in Namarrói, Mozambique, and satellites saw it burning for 48 days. Copernicus’s global GWIS system rebuilt a burnt perimeter of 172,167 hectares from heat detections, spread across 3 municipalities.

This page is probably a fire complex, not a single fire. GWIS merges into one perimeter the fires that touch over weeks, which in large burning seasons can join dozens of separate fires. The total area is reliable; the origin and dates refer to the whole complex.

Other fire pages in the same area and on the same dates:

It is the largest fire in Zambézia since 2016 (of 562 with a page). The largest in Mozambique in 2022, of 206.

Burnt area
172,167ha
GWIS perimeter (Copernicus)
Duration
48days
19 Sept 2022 – 5 Nov 2022
Municipalities hit
3
districts
Started on
19 Sept
2022
Heat detections
12,633
in a single hotspot: 134 MW
Danger at start
31
High · FWI index
Average daily power
2.6GW
detected power per day, on average

Where it burned

HOTSPOTS BY DAY 19 Sept5 Nov
6 Nov 2022

How it evolved, day by day

19 Sept 2022 · 48 MW · 7 20 Sept 2022 · 556 MW · 64 21 Sept 2022 · 771 MW · 93 22 Sept 2022 · 340 MW · 48 23 Sept 2022 · 619 MW · 86 24 Sept 2022 · 288 MW · 29 25 Sept 2022 · 326 MW · 44 26 Sept 2022 · 3 MW · 3 27 Sept 2022 · 207 MW · 37 28 Sept 2022 · 805 MW · 97 29 Sept 2022 · 916 MW · 99 30 Sept 2022 · 737 MW · 95 1 Oct 2022 · 2,897 MW · 275 2 Oct 2022 · 3,562 MW · 277 3 Oct 2022 · 2,648 MW · 249 4 Oct 2022 · 2,102 MW · 267 5 Oct 2022 · 7,051 MW · 774 6 Oct 2022 · 5,903 MW · 638 7 Oct 2022 · 6,278 MW · 604 8 Oct 2022 · 3,449 MW · 302 9 Oct 2022 · 3,669 MW · 332 10 Oct 2022 · 8,250 MW · 791 11 Oct 2022 · 7,069 MW · 608 12 Oct 2022 · 4,522 MW · 424 13 Oct 2022 · 4,075 MW · 325 14 Oct 2022 · 4,989 MW · 520 15 Oct 2022 · 6,792 MW · 660 16 Oct 2022 · 4,847 MW · 663 17 Oct 2022 · 6,198 MW · 535 18 Oct 2022 · 2,394 MW · 252 19 Oct 2022 · 3,432 MW · 274 20 Oct 2022 · 1,623 MW · 111 21 Oct 2022 · 1,004 MW · 182 22 Oct 2022 · 5,106 MW · 531 23 Oct 2022 · 3,756 MW · 403 24 Oct 2022 · 4,659 MW · 382 25 Oct 2022 · 2,249 MW · 277 26 Oct 2022 · 3,491 MW · 339 27 Oct 2022 · 4,273 MW · 475 28 Oct 2022 · 2,050 MW · 230 29 Oct 2022 · 226 MW · 24 30 Oct 2022 · 480 MW · 48 31 Oct 2022 · 405 MW · 32 1 Nov 2022 · 812 MW · 58 2 Nov 2022 · 522 MW · 42 3 Nov 2022 · 136 MW · 19 5 Nov 2022 · 61 MW · 7 6 Nov 2022 · 8 MW · 1
19 Sept 29 Sept 10 Oct 19 Oct 29 Oct

Fire radiative power detected each day, in megawatts, and number of hotspots. The magenta bar marks the peak day.

The weather it burned in

36°high
44km/h · peak gust
19%lowest humidity

It had gone 4 days without rain (1 mm or more) when it started. Rain came after the fire: 1.3 mm on 10 Nov.

This area had burned before

91% of the perimeter overlaps earlier fires recorded since 2016: 101,503 ha in 2016, 89,727 ha in 2017, 59,514 ha in 2018, 69,965 ha in 2019, 98,340 ha in 2020, 66,384 ha in 2021. Part of it burned more than once, so the yearly figures add up to more than the 157,504 ha that had burned before.

How big is it?

20 km
It burned almost the same area as London (1,722 km² against 1,583 km²).

London boundary: geoBoundaries · Office for National Statistics (Open Government Licence v3.0).

This compares size, not location: both shapes are at the same scale, north up, centred on each other.

What happened to each town

  1. 148,722 ha
    24 %
  2. Namarrói where it started
    24,864 ha
    8.1 %
  3. 668 ha
    0.2 %

Burnt area inside each municipality, from crossing the GWIS perimeter with administrative boundaries. The distance runs from the point marking the centre of each area to the nearest fire: staying a kilometre away does not mean it reached the houses.

People and buildings inside the perimeter

GHSL 2020
Built-up area106 ha
Residents≈ 34,000

Inside the perimeter there were about 106 hectares of built-up land and about 34,000 residents (GHSL 2020, satellite-based estimate).

This is an estimate on 100 m cells, made from satellite imagery and census data: it does not mean that homes burned or that anyone was harmed. The perimeter also contains land that never burned.

Source: Global Human Settlement Layer (GHS-BUILT-S and GHS-POP R2023A), European Commission Joint Research Centre (JRC), © European Union, CC BY 4.0. Sum inside the perimeter computed by WorldFires. human-settlement.emergency.copernicus.eu

The weather day by day

ECMWF ERA5 reanalysis at the fire location, the standard reference for past weather, and the Canadian Fire Weather Index (the same system Copernicus uses), computed by WorldFires from that data. Days after the fire run until the first rain.

Open-Meteo.com (CC BY 4.0) · Copernicus Climate Change Service (ERA5)

Day High Min. humidity Peak gust Rain Danger (FWI)
19 Sept 31.3 °C 31 % 41 km/h 0.0 mm High 31
20 Sept 32.2 °C 32 % 42 km/h 0.0 mm High 32
21 Sept 30.5 °C 29 % 32 km/h 0.0 mm High 31
22 Sept 30.7 °C 31 % 34 km/h 0.0 mm High 29
23 Sept 31.3 °C 29 % 33 km/h 0.0 mm High 34
24 Sept 30.4 °C 35 % 36 km/h 0.0 mm High 37
25 Sept 30.6 °C 31 % 33 km/h 0.0 mm High 35
26 Sept 31.2 °C 31 % 32 km/h 0.0 mm High 34
27 Sept 31.9 °C 27 % 32 km/h 0.0 mm High 37
28 Sept 29.6 °C 35 % 41 km/h 0.0 mm Very high 44
29 Sept 29.1 °C 39 % 36 km/h 0.0 mm High 35
30 Sept 30.8 °C 28 % 27 km/h 0.0 mm High 32
1 Oct 31.1 °C 24 % 31 km/h 0.0 mm Very high 39
2 Oct 31.8 °C 30 % 32 km/h 0.0 mm Very high 38
3 Oct 32.3 °C 32 % 26 km/h 0.0 mm High 35
4 Oct 34.1 °C 21 % 30 km/h 0.0 mm Very high 42
5 Oct 33.6 °C 19 % 38 km/h 0.0 mm Extreme 55
6 Oct 33.5 °C 25 % 37 km/h 0.0 mm Extreme 55
7 Oct 33.4 °C 26 % 37 km/h 0.0 mm Extreme 52
8 Oct 32.0 °C 32 % 44 km/h 0.3 mm Extreme 50
9 Oct 31.9 °C 28 % 33 km/h 0.0 mm Very high 42
10 Oct 32.2 °C 25 % 36 km/h 0.0 mm Very high 46
11 Oct 31.0 °C 27 % 38 km/h 0.0 mm Very high 47
12 Oct 31.2 °C 28 % 34 km/h 0.0 mm Very high 47
13 Oct 32.5 °C 27 % 34 km/h 0.0 mm Very high 46
14 Oct 33.7 °C 21 % 28 km/h 0.0 mm Very high 44
15 Oct 33.1 °C 23 % 28 km/h 0.0 mm Very high 44
16 Oct 32.6 °C 23 % 36 km/h 0.0 mm Very high 48
17 Oct 32.3 °C 25 % 32 km/h 0.0 mm Very high 49
18 Oct 30.9 °C 35 % 30 km/h 0.1 mm Very high 39
19 Oct 29.7 °C 44 % 33 km/h 0.3 mm High 34
20 Oct 30.5 °C 41 % 29 km/h 2.7 mm High 29
21 Oct 33.7 °C 22 % 32 km/h 0.0 mm High 36
22 Oct 33.8 °C 23 % 34 km/h 0.0 mm Very high 46
23 Oct 33.7 °C 23 % 28 km/h 0.0 mm Very high 42
24 Oct 34.3 °C 25 % 25 km/h 0.0 mm Very high 43
25 Oct 33.1 °C 32 % 37 km/h 0.0 mm Very high 40
26 Oct 34.9 °C 24 % 37 km/h 0.0 mm Very high 41
27 Oct 35.7 °C 21 % 30 km/h 0.0 mm Very high 47
28 Oct 35.4 °C 23 % 34 km/h 0.0 mm Very high 44
29 Oct 29.9 °C 50 % 31 km/h 5.1 mm High 31
30 Oct 29.5 °C 46 % 28 km/h 0.2 mm Low 6
31 Oct 33.7 °C 34 % 26 km/h 0.0 mm High 26
1 Nov 32.8 °C 34 % 40 km/h 0.2 mm High 34
2 Nov 31.7 °C 37 % 37 km/h 1.3 mm Moderate 19
3 Nov 30.9 °C 48 % 28 km/h 2.6 mm Moderate 19
4 Nov 31.4 °C 43 % 27 km/h 4.7 mm Moderate 13
5 Nov 32.7 °C 43 % 30 km/h 2.7 mm Low 9
6 Nov after 32.6 °C 38 % 31 km/h 0.0 mm Low 10
7 Nov after 33.0 °C 37 % 28 km/h 0.0 mm High 25
8 Nov after 33.5 °C 36 % 32 km/h 0.0 mm High 27
9 Nov after 32.5 °C 40 % 41 km/h 0.6 mm High 29
10 Nov after 32.9 °C 41 % 31 km/h 1.3 mm High 23

Its twins: fires that started in the same weather

It started with an FWI of 31.3, a minimum humidity of 31% and 4 days without rain. Fires in the area that started in weather like this since 2016: 21.

FWI at the start 31.3
Minimum humidity 31 %
Days without rain 4
this fire chosen twins rest of the area
Almost identicalSimilar

Outlines of the closest twins

Lugela fire, October 2021
4,074 ha 17 days FWI 30.7 Min. humidity 30 % 14 km away, in 2021

First rain (1 mm or more) after it ended: none in the following ten days.

What happened to them

13 days
median duration
3,611 ha
median area
29 %
went past 10,000 ha
3.0 mm
rain at the end (median; 17 of 21 had it)

It was 47.7 times larger than the median of its twins and lasted 48 days, against 13 days.

None of its 21 twins burned more. The weather on the first day does not explain everything: the wind in the following days, the fuel and the firefighting also count. In 4 of 21, not even 1 mm fell in the ten days after the end: they went out without rain. In the rest, the first rainy day brought a median of 3.0 mm.

This is a bank of analogues: it shows what usually happens, not what will happen. With fewer than 15 twins we give no figures. How we calculate it

How it ended

1.3 mmfirst rain
10 Nov5 days after it ended
44km/h · max. gust

It was considered over on 5 Nov, and on 10 Nov 1.3 mm fell. We do not know whether the rain or the firefighters put it out. Twins with rain when they ended: 17 of 21, with a median of 3.0 mm.

Weather on this page: Open-Meteo.com (CC BY 4.0) · Copernicus Climate Change Service (ERA5)

How a twin is chosen

  • Same area: fires that have already ended, less than 250 km from this one, since 2016.
  • Same start: we compare the FWI on the first day, the minimum humidity that day and the run of days without rain before it. The slider sets how much they may differ.
  • Only pages with final weather data (ERA5 reanalysis) calculated in the same way as this fire’s; agricultural and grass burns and pages with data under review are left out.
  • Fires burning at the same time as this one (a week before or after) are left out: they share the same spell of weather and do not count as a precedent.
  • They are sorted by similarity, and the outlines of the first five are drawn.

How we calculate it

Before and after, from space

Drag the line to compare the same ground before the fire and after it.

Before · 12 Sept 2022
After · 12 Nov 2022

If the day is cloudy, change the date: each satellite passes once a day. In false colour the burnt ground looks brown or red.

The smoke

CAMS · Copernicus

On 6 October 2022 the air beside the fire reached 257 µg/m³ of PM2.5. That day averaged 76: 5.1 times the WHO daily guideline (15).

PM2.5 peak257 µg/m³
Days over the guideline32 days
PM10367 µg/m³
Optical depth1.42
17 Sept28 Sept9 Oct20 Oct31 Oct
Good Fair Moderate Poor Very poor Extremely poor

Particles from the Copernicus CAMS model at the centre of the perimeter; these are not measurements in each town. The pale bar is the worst hour, the solid one the daily average.

Open-Meteo.com (CC BY 4.0) · Copernicus Atmosphere Monitoring Service (CAMS)

Detections table · 12,633Every satellite heat detection, one by one, with time, satellite, power and coordinates.
⬇ Download CSV Times in UTC. Each detection is a 375 m pixel: a large fire yields hundreds per pass.
Date and timeSatelliteFRP (MW)LatLon

Other fires nearby

All fires in Mozambique

Frequently asked questions

How long did the Namarrói fire last?
According to the heat detections seen by satellite inside the perimeter, it burned from 19 September 2022 to 5 November 2022 (48 days). The perimeter dates it from 25 September 2022 to 31 October 2022.
How much area did it burn?
The perimeter GWIS (Copernicus) rebuilt from heat detections is 172,167 hectares (1,721.7 km²). It is an estimate: official national figures may differ.
Which municipalities burned?
The fire entered 3 municipalities: Lugela (148,722 ha, 24 %); Namarrói (24,864 ha, 8.1 %); Molumbo (668 ha, 0.2 %).
What was the weather like?
During the fire the temperature reached 35.7 °C, humidity dropped to 19 % and gusts hit 44 km/h. The fire danger index (FWI) reached 55, class Extreme.
Where does this data come from?
From the GWIS (Copernicus) burnt perimeter, NASA FIRMS VIIRS hotspots and the administrative boundaries of Mozambique (geoBoundaries). It is not an official report.
How did the fires that started in similar weather in this area end?
Fires less than 250 km away that started since 2016 with a similar FWI, humidity and dry spell: 21. Their median duration was 13 days and their median area 3,611 ha; 29 % went past 10,000 ha. None of its 21 twins burned more. The weather on the first day does not explain everything: the wind in the following days, the fuel and the firefighting also count. In 4 of 21, not even 1 mm fell in the ten days after the end: they went out without rain. In the rest, the first rainy day brought a median of 3.0 mm.

Where to verify it

A satellite detection is not an official report. Final figures and the fire’s status are published by each country’s emergency service.

Satellite cross-check

History of this page · 3 Changes in area, dates, name, official record or merged pages, compared every night since 24 October 2026.
  1. Name: Lugela → Namarrói.
  2. Last day with fire: 31 October 2022 → 5 November 2022.
  3. Start date: 25 September 2022 → 19 September 2022.

RSS Changes to this page With cross-checks and a citable version

Does something look wrong on this page?

This page is built from satellite data and official records, and it sometimes gets things wrong: the wrong dates, the wrong town, two fires merged into one, or something that was not a wildfire at all. If you know this fire first-hand (you live nearby, saw it, fought it or reported on it), tell us what really happened and we will check it.

Report an error
What do you think is wrong?

We will only use your email to reply about this report. Privacy.

How we know this
  • Perimeter: GWIS (Copernicus), rebuilt from heat detections rather than mapped on imagery; 14 polygons grouped in this page.
  • Dates adjusted with the VIIRS detections inside the perimeter, which said 25 September 2022 to 31 October 2022. 12,633 Suomi-NPP VIIRS detections on those dates.
  • We have not matched this page with any official record.
  • Weather: Copernicus ERA5 reanalysis at the fire location, in cells of about 25 km.
  • Built-up area and population come from the JRC Global Human Settlement Layer (epoch 2020, 100 m cells), summed inside the perimeter: an estimate of what was there, not a damage count.

How we build fire pages: methodology

Where this data comes from

The perimeter comes from the Copernicus Global Wildfire Information System (GWIS), which rebuilds it from MODIS and VIIRS heat detections and publishes it under CC BY 4.0. It is not measured on imagery as in Europe, so it is an estimate. Heat detections come from the VIIRS sensors aboard Suomi-NPP and NOAA-20, distributed by NASA FIRMS at 375 m resolution. Municipal boundaries come from geoBoundaries ADM2 (Creative Commons Attribution 3.0 Intergovernmental Organisations (CC BY 3.0 IGO)). The area per municipality is computed by WorldFires by crossing the perimeter with those boundaries, so it may differ from each country’s official figure.