Skip to content
worldfires
KH · Cambodia · –

Moung Ruessei fire, 13 April 2024 Moung Ruessei, Sangkae

Out · last detection 12 May 2024, 05:45 UTC

The fire started on 13 April 2024 in Moung Ruessei, Cambodia, and satellites saw it burning for 30 days. Copernicus’s global GWIS system rebuilt a burnt perimeter of 12,407 hectares from heat detections, spread across 2 municipalities.

It is the 4th largest in Battambang since 2016 (of 28 with a page). The largest in Cambodia in 2024, of 41.

Burnt area
12,407ha
GWIS perimeter (Copernicus)
Duration
30days
13 Apr 2024 – 12 May 2024
Municipalities hit
2
districts
Started on
13 Apr
2024
Heat detections
843
in a single hotspot: 84 MW
Danger at start
24
High · FWI index
Average daily power
319MW
detected power per day, on average

Where it burned

HOTSPOTS BY DAY 13 Apr12 May
12 May 2024

How it evolved, day by day

13 Apr 2024 · 118 MW · 29 14 Apr 2024 · 124 MW · 16 15 Apr 2024 · 7 MW · 1 16 Apr 2024 · 6 MW · 1 17 Apr 2024 · 62 MW · 7 18 Apr 2024 · 21 MW · 4 19 Apr 2024 · 1 MW · 1 20 Apr 2024 · 229 MW · 37 21 Apr 2024 · 158 MW · 16 22 Apr 2024 · 54 MW · 7 23 Apr 2024 · 121 MW · 7 24 Apr 2024 · 338 MW · 41 25 Apr 2024 · 416 MW · 64 26 Apr 2024 · 1,551 MW · 101 27 Apr 2024 · 612 MW · 34 28 Apr 2024 · 195 MW · 20 29 Apr 2024 · 1,394 MW · 136 30 Apr 2024 · 320 MW · 36 1 May 2024 · 1,194 MW · 126 2 May 2024 · 638 MW · 55 4 May 2024 · 602 MW · 51 5 May 2024 · 197 MW · 14 6 May 2024 · 106 MW · 21 9 May 2024 · 19 MW · 2 10 May 2024 · 56 MW · 6 11 May 2024 · 65 MW · 8 12 May 2024 · 9 MW · 2
13 Apr 19 Apr 26 Apr 1 May 10 May

Fire radiative power detected each day, in megawatts, and number of hotspots. The magenta bar marks the peak day.

The weather it burned in

42°high
34km/h · peak gust
28%lowest humidity

It had gone 3 days without rain (1 mm or more) when it started. Rain came after the fire: 7.7 mm on 13 May.

This area had burned before

84% of the perimeter overlaps earlier fires recorded since 2016: 6,867 ha in 2016, 5,480 ha in 2019, 2,783 ha in 2020, 5 ha in 2023. Part of it burned more than once, so the yearly figures add up to more than the 10,418 ha that had burned before.

How big is it?

10 km
It burned the equivalent of 7.8% of the area of London (124 km² against 1,583 km²).

London boundary: geoBoundaries · Office for National Statistics (Open Government Licence v3.0).

This compares size, not location: both shapes are at the same scale, north up, centred on each other.

What happened to each town

  1. Moung Ruessei where it started
    11,629 ha reached on 13 Apr
    8.2 %
  2. 857 ha reached on 13 Apr
    0.7 %

Burnt area inside each municipality, from crossing the GWIS perimeter with administrative boundaries. The distance runs from the point marking the centre of each area to the nearest fire: staying a kilometre away does not mean it reached the houses.

People and buildings inside the perimeter

GHSL 2025
Built-up area< 0.1 ha
Residents< 20

Inside the perimeter there was no noticeable built-up land and almost nobody lived there (GHSL 2025, satellite-based estimate).

This is an estimate on 100 m cells, made from satellite imagery and census data: it does not mean that homes burned or that anyone was harmed. The perimeter also contains land that never burned. The GHSL 2025 epoch is a projection made from 2020 and earlier data.

Source: Global Human Settlement Layer (GHS-BUILT-S and GHS-POP R2023A), European Commission Joint Research Centre (JRC), © European Union, CC BY 4.0. Sum inside the perimeter computed by WorldFires. human-settlement.emergency.copernicus.eu

The weather day by day

ECMWF ERA5 reanalysis at the fire location, the standard reference for past weather, and the Canadian Fire Weather Index (the same system Copernicus uses), computed by WorldFires from that data. Days after the fire run until the first rain.

Open-Meteo.com (CC BY 4.0) · Copernicus Climate Change Service (ERA5)

Day High Min. humidity Peak gust Rain Danger (FWI)
13 Apr 39.1 °C 37 % 26 km/h 0.0 mm High 24
14 Apr 39.3 °C 37 % 24 km/h 0.2 mm High 26
15 Apr 39.6 °C 35 % 25 km/h 0.1 mm High 28
16 Apr 40.1 °C 33 % 27 km/h 0.1 mm High 26
17 Apr 39.5 °C 36 % 25 km/h 0.6 mm High 27
18 Apr 40.2 °C 34 % 23 km/h 0.0 mm High 29
19 Apr 40.3 °C 36 % 23 km/h 0.0 mm High 30
20 Apr 40.7 °C 35 % 23 km/h 0.0 mm High 32
21 Apr 40.1 °C 36 % 23 km/h 0.0 mm High 31
22 Apr 39.9 °C 40 % 23 km/h 0.1 mm High 30
23 Apr 40.8 °C 40 % 20 km/h 0.0 mm High 31
24 Apr 41.7 °C 32 % 25 km/h 0.1 mm High 33
25 Apr 41.6 °C 37 % 24 km/h 0.1 mm High 34
26 Apr 42.2 °C 30 % 31 km/h 0.0 mm High 34
27 Apr 42.2 °C 32 % 23 km/h 0.0 mm High 32
28 Apr 41.2 °C 39 % 32 km/h 0.7 mm High 35
29 Apr 42.5 °C 33 % 26 km/h 0.0 mm High 32
30 Apr 42.1 °C 36 % 28 km/h 0.0 mm High 37
1 May 42.5 °C 28 % 28 km/h 0.0 mm High 36
2 May 41.6 °C 29 % 22 km/h 0.0 mm High 37
3 May 40.5 °C 39 % 25 km/h 0.0 mm High 33
4 May 41.7 °C 31 % 26 km/h 1.0 mm High 34
5 May 40.2 °C 33 % 32 km/h 1.6 mm High 33
6 May 39.7 °C 38 % 34 km/h 1.0 mm High 27
7 May 32.2 °C 70 % 25 km/h 10.2 mm Very low 2
8 May 36.2 °C 50 % 23 km/h 1.2 mm Very low 5
9 May 35.9 °C 51 % 27 km/h 2.7 mm Moderate 15
10 May 37.2 °C 44 % 27 km/h 1.4 mm Low 8
11 May 36.8 °C 47 % 22 km/h 0.6 mm Moderate 12
12 May 36.9 °C 49 % 28 km/h 0.3 mm Moderate 20
13 May after 31.3 °C 75 % 17 km/h 7.7 mm Very low 1

Its twins: fires that started in the same weather

It started with an FWI of 24.3, a minimum humidity of 37% and 3 days without rain. Fires in the area that started in weather like this since 2016: 24.

FWI at the start 24.3
Minimum humidity 37 %
Days without rain 3
this fire chosen twins rest of the area
Almost identicalSimilar

Outlines of the closest twins

Phnum Kravanh fire, April 2016
2,245 ha 13 days FWI 28.7 Min. humidity 37 % 88 km away, in 2016

First rain (1 mm or more) after it ended: 1.3 mm on 26 Apr.

What happened to them

22 days
median duration
3,686 ha
median area
4 %
went past 10,000 ha
3.2 mm
rain at the end (median; 14 of 24 had it)

It was 3.4 times larger than the median of its twins and lasted 30 days, against 22 days.

Only 1 of its 24 twins burned more. The weather on the first day does not explain everything: the wind in the following days, the fuel and the firefighting also count. In 10 of 24, not even 1 mm fell in the ten days after the end: they went out without rain. In the rest, the first rainy day brought a median of 3.2 mm.

This is a bank of analogues: it shows what usually happens, not what will happen. With fewer than 15 twins we give no figures. How we calculate it

How it ended

7.7 mmfirst rain
13 Maythe day after it ended
34km/h · max. gust

It was considered over on 12 May, and on 13 May 7.7 mm fell. We do not know whether the rain or the firefighters put it out. Twins with rain when they ended: 14 of 24, with a median of 3.2 mm.

Weather on this page: Open-Meteo.com (CC BY 4.0) · Copernicus Climate Change Service (ERA5)

How a twin is chosen

  • Same area: fires that have already ended, less than 250 km from this one, since 2016.
  • Same start: we compare the FWI on the first day, the minimum humidity that day and the run of days without rain before it. The slider sets how much they may differ.
  • Only pages with final weather data (ERA5 reanalysis) calculated in the same way as this fire’s; agricultural and grass burns and pages with data under review are left out.
  • Fires burning at the same time as this one (a week before or after) are left out: they share the same spell of weather and do not count as a precedent.
  • They are sorted by similarity, and the outlines of the first five are drawn.

How we calculate it

Before and after, from space

Drag the line to compare the same ground before the fire and after it.

Before · 6 Apr 2024
After · 19 May 2024

If the day is cloudy, change the date: each satellite passes once a day. In false colour the burnt ground looks brown or red.

The smoke

CAMS · Copernicus

On 3 May 2024 the air beside the fire reached 40 µg/m³ of PM2.5. That day averaged 31: 2.1 times the WHO daily guideline (15).

PM2.5 peak40 µg/m³
Days over the guideline13 days
PM1061 µg/m³
Optical depth1.30
18 Apr23 Apr28 Apr3 May8 May
Good Fair Moderate Poor Very poor Extremely poor

Particles from the Copernicus CAMS model at the centre of the perimeter; these are not measurements in each town. The pale bar is the worst hour, the solid one the daily average.

Open-Meteo.com (CC BY 4.0) · Copernicus Atmosphere Monitoring Service (CAMS)

Detections table · 843Every satellite heat detection, one by one, with time, satellite, power and coordinates.
⬇ Download CSV Times in UTC. Each detection is a 375 m pixel: a large fire yields hundreds per pass.
Date and timeSatelliteFRP (MW)LatLon

Other fires nearby

All fires in Cambodia

Frequently asked questions

How long did the Moung Ruessei fire last?
According to the heat detections seen by satellite inside the perimeter, it burned from 13 April 2024 to 12 May 2024 (30 days). The perimeter dates it from 20 April 2024 to 5 May 2024.
How much area did it burn?
The perimeter GWIS (Copernicus) rebuilt from heat detections is 12,407 hectares (124.1 km²). It is an estimate: official national figures may differ.
Which municipalities burned?
The fire entered 2 municipalities: Moung Ruessei (11,629 ha, 8.2 %); Sangkae (857 ha, 0.7 %).
What was the weather like?
During the fire the temperature reached 42.5 °C, humidity dropped to 28 % and gusts hit 34 km/h. The fire danger index (FWI) reached 37, class High.
Where does this data come from?
From the GWIS (Copernicus) burnt perimeter, NASA FIRMS VIIRS hotspots and the administrative boundaries of Cambodia (geoBoundaries). It is not an official report.
How did the fires that started in similar weather in this area end?
Fires less than 250 km away that started since 2016 with a similar FWI, humidity and dry spell: 24. Their median duration was 22 days and their median area 3,686 ha; 4 % went past 10,000 ha. Only 1 of its 24 twins burned more. The weather on the first day does not explain everything: the wind in the following days, the fuel and the firefighting also count. In 10 of 24, not even 1 mm fell in the ten days after the end: they went out without rain. In the rest, the first rainy day brought a median of 3.2 mm.

Where to verify it

A satellite detection is not an official report. Final figures and the fire’s status are published by each country’s emergency service.

Satellite cross-check

History of this page · 2 Changes in area, dates, name, official record or merged pages, compared every night since 24 October 2026.
  1. Last day with fire: 5 May 2024 → 12 May 2024.
  2. Start date: 20 April 2024 → 13 April 2024.

RSS Changes to this page With cross-checks and a citable version

Does something look wrong on this page?

This page is built from satellite data and official records, and it sometimes gets things wrong: the wrong dates, the wrong town, two fires merged into one, or something that was not a wildfire at all. If you know this fire first-hand (you live nearby, saw it, fought it or reported on it), tell us what really happened and we will check it.

Report an error
What do you think is wrong?

We will only use your email to reply about this report. Privacy.

How we know this
  • Perimeter: GWIS (Copernicus), rebuilt from heat detections rather than mapped on imagery.
  • Dates adjusted with the VIIRS detections inside the perimeter, which said 20 April 2024 to 5 May 2024. 843 Suomi-NPP VIIRS detections on those dates.
  • We have not matched this page with any official record.
  • Weather: Copernicus ERA5 reanalysis at the fire location, in cells of about 25 km.
  • Built-up area and population come from the JRC Global Human Settlement Layer (epoch 2025, 100 m cells), summed inside the perimeter: an estimate of what was there, not a damage count.

How we build fire pages: methodology

Where this data comes from

The perimeter comes from the Copernicus Global Wildfire Information System (GWIS), which rebuilds it from MODIS and VIIRS heat detections and publishes it under CC BY 4.0. It is not measured on imagery as in Europe, so it is an estimate. Heat detections come from the VIIRS sensors aboard Suomi-NPP and NOAA-20, distributed by NASA FIRMS at 375 m resolution. Municipal boundaries come from geoBoundaries ADM2 (Creative Commons Attribution 4.0 International (CC BY 4.0)). The area per municipality is computed by WorldFires by crossing the perimeter with those boundaries, so it may differ from each country’s official figure.