Skip to content
worldfires
BR · Brazil · –

Monte Alegre de Goiás fire, October 2017 Monte Alegre de Goiás

Out · last detection

The fire started on in Monte Alegre de Goiás, Brazil, and satellites saw it burning for 12 days. Copernicus’s global GWIS system rebuilt a burnt perimeter of 9,401 hectares from heat detections, spread across a single municipality.

It is number 100 by size of the 488 fires with a page that started in Goiás since 2016. Number 191 in Brazil in 2017, of 994.

Burnt area
9,401ha
GWIS perimeter (Copernicus)
Duration
12days
17 Oct 2017 – 28 Oct 2017
Municipalities hit
1
municipalities
Started on
17 Oct
2017
Heat detections
322
in a single hotspot: 114 MW
Danger at start
58
Extreme · FWI index
Average daily power
224MW
detected power per day, on average

Where it burned

HOTSPOTS BY DAY 17 Oct28 Oct
28 Oct 2017

How it evolved, day by day

17 Oct 2017 · 517 MW · 30 18 Oct 2017 · 125 MW · 11 19 Oct 2017 · 2 MW · 1 21 Oct 2017 · 60 MW · 7 22 Oct 2017 · 132 MW · 30 24 Oct 2017 · 388 MW · 58 25 Oct 2017 · 440 MW · 72 26 Oct 2017 · 510 MW · 85 27 Oct 2017 · 46 MW · 15 28 Oct 2017 · 16 MW · 13
17 Oct 19 Oct 22 Oct 25 Oct 27 Oct

Fire radiative power detected each day, in megawatts, and number of hotspots. The magenta bar marks the peak day.

The weather it burned in

36°high
40km/h · peak gust
17%lowest humidity

It had gone more than two months without rain (1 mm or more) when it started. Rain came after the fire: 1.3 mm on 29 Oct.

This area had burned before

No earlier perimeters overlap this fire since 2016, when the satellite record begins.

How big is it?

10 km
It burned the equivalent of 5.9% of the area of London (94 km² against 1,583 km²).

London boundary: geoBoundaries · Office for National Statistics (Open Government Licence v3.0).

This compares size, not location: both shapes are at the same scale, north up, centred on each other.

What happened to each town

  1. Monte Alegre de Goiás 6,692 inhabitants where it started
    9,464 ha reached on 17 Oct
    3.0 %

Burnt area inside each municipality, from crossing the GWIS perimeter with administrative boundaries. The distance runs from the point marking the centre of each area to the nearest fire: staying a kilometre away does not mean it reached the houses.

People and buildings inside the perimeter

GHSL 2015
Built-up area< 0.1 ha
Residents< 20

Inside the perimeter there was no noticeable built-up land and almost nobody lived there (GHSL 2015, satellite-based estimate).

This is an estimate on 100 m cells, made from satellite imagery and census data: it does not mean that homes burned or that anyone was harmed. The perimeter also contains land that never burned.

Source: Global Human Settlement Layer (GHS-BUILT-S and GHS-POP R2023A), European Commission Joint Research Centre (JRC), © European Union, CC BY 4.0. Sum inside the perimeter computed by WorldFires. human-settlement.emergency.copernicus.eu

The weather day by day

ECMWF ERA5 reanalysis at the fire location, the standard reference for past weather, and the Canadian Fire Weather Index (the same system Copernicus uses), computed by WorldFires from that data. Days after the fire run until the first rain.

Open-Meteo.com (CC BY 4.0) · Copernicus Climate Change Service (ERA5)

Started with Extreme FWI: 46 % of the area in Brazil 60 days without rain: 55 % of the area in Brazil

Day High Min. humidity Peak gust Rain Danger (FWI)
17 Oct 32.7 °C 20 % 40 km/h 0.0 mm Extreme 58
18 Oct 31.6 °C 23 % 38 km/h 0.0 mm Extreme 57
19 Oct 32.9 °C 25 % 34 km/h 0.0 mm Very high 47
20 Oct 32.3 °C 26 % 30 km/h 0.0 mm Very high 48
21 Oct 35.4 °C 19 % 36 km/h 0.0 mm Extreme 54
22 Oct 36.1 °C 17 % 34 km/h 0.0 mm Extreme 60
23 Oct 34.0 °C 25 % 25 km/h 0.0 mm Very high 48
24 Oct 34.7 °C 21 % 31 km/h 0.0 mm Extreme 52
25 Oct 35.2 °C 19 % 33 km/h 0.0 mm Extreme 53
26 Oct 34.5 °C 24 % 28 km/h 0.0 mm Extreme 54
27 Oct 33.8 °C 29 % 39 km/h 0.0 mm Extreme 59
28 Oct 30.1 °C 41 % 37 km/h 0.3 mm Very high 43
29 Oct after 32.5 °C 32 % 36 km/h 1.3 mm High 30

Its twins: fires that started in the same weather

It started with an FWI of 57.8, a minimum humidity of 20% and more than two months without rain. Fires in the area that started in weather like this since 2016: 16.

FWI at the start 57.8
Minimum humidity 20 %
Days without rain 60+
this fire chosen twins rest of the area
Almost identicalSimilar

Outlines of the closest twins

Nova Roma fire, September 2020
3,774 ha 11 days FWI 59.8 Min. humidity 20 % 16 km away, in 2020

First rain (1 mm or more) after it ended: 10.6 mm on 11 Oct.

What happened to them

11 days
median duration
6,111 ha
median area
31 %
went past 10,000 ha
4.4 mm
rain at the end (median; 9 of 16 had it)

It was 1.5 times larger than the median of its twins and lasted 12 days, against 11 days.

Only 5 of its 16 twins burned more. The weather on the first day does not explain everything: the wind in the following days, the fuel and the firefighting also count. In 7 of 16, not even 1 mm fell in the ten days after the end: they went out without rain. In the rest, the first rainy day brought a median of 4.4 mm.

This is a bank of analogues: it shows what usually happens, not what will happen. With fewer than 15 twins we give no figures. How we calculate it

How it ended

1.3 mmfirst rain
29 Octthe day after it ended
40km/h · max. gust

It was considered over on 28 Oct, and on 29 Oct 1.3 mm fell. We do not know whether the rain or the firefighters put it out. Twins with rain when they ended: 9 of 16, with a median of 4.4 mm.

Weather on this page: Open-Meteo.com (CC BY 4.0) · Copernicus Climate Change Service (ERA5)

How a twin is chosen

  • Same area: fires that have already ended, less than 250 km from this one, since 2016.
  • Same start: we compare the FWI on the first day, the minimum humidity that day and the run of days without rain before it. The slider sets how much they may differ.
  • Only pages with final weather data (ERA5 reanalysis) calculated in the same way as this fire’s; agricultural and grass burns and pages with data under review are left out.
  • Fires burning at the same time as this one (a week before or after) are left out: they share the same spell of weather and do not count as a precedent.
  • They are sorted by similarity, and the outlines of the first five are drawn.

How we calculate it

Before and after, from space

Drag the line to compare the same ground before the fire and after it.

Before · 10 Oct 2017
After · 4 Nov 2017

If the day is cloudy, change the date: each satellite passes once a day. In false colour the burnt ground looks brown or red.

Detections table · 322Every satellite heat detection, one by one, with time, satellite, power and coordinates.
⬇ Download CSV Times in UTC. Each detection is a 375 m pixel: a large fire yields hundreds per pass.
Date and timeSatelliteFRP (MW)LatLon

Other fires nearby

All fires in Brazil

Frequently asked questions

How long did the Monte Alegre de Goiás fire last?
According to the heat detections seen by satellite inside the perimeter, it burned from 17 October 2017 to 28 October 2017 (12 days). The perimeter dates it from 20 October 2017 to 28 October 2017.
How much area did it burn?
The perimeter GWIS (Copernicus) rebuilt from heat detections is 9,401 hectares (94.0 km²). It is an estimate: official national figures may differ.
Which municipalities burned?
The fire only entered Monte Alegre de Goiás (9,464 ha, 3.0 %).
What was the weather like?
During the fire the temperature reached 36.1 °C, humidity dropped to 17 % and gusts hit 40 km/h. The fire danger index (FWI) reached 60, class Extreme.
Where does this data come from?
From the GWIS (Copernicus) burnt perimeter, NASA FIRMS VIIRS hotspots and the administrative boundaries of Brazil (geoBoundaries). It is not an official report.
How did the fires that started in similar weather in this area end?
Fires less than 250 km away that started since 2016 with a similar FWI, humidity and dry spell: 16. Their median duration was 11 days and their median area 6,111 ha; 31 % went past 10,000 ha. Only 5 of its 16 twins burned more. The weather on the first day does not explain everything: the wind in the following days, the fuel and the firefighting also count. In 7 of 16, not even 1 mm fell in the ten days after the end: they went out without rain. In the rest, the first rainy day brought a median of 4.4 mm.

Where to verify it

A satellite detection is not an official report. Final figures and the fire’s status are published by each country’s emergency service.

Emergency number: 193 · Emergency number and official warnings

Satellite cross-check

History of this page · 1 Changes in area, dates, name, official record or merged pages, compared every night since 24 October 2026.
  1. Start date: 20 October 2017 → 17 October 2017.

RSS Changes to this page With cross-checks and a citable version

Does something look wrong on this page?

This page is built from satellite data and official records, and it sometimes gets things wrong: the wrong dates, the wrong town, two fires merged into one, or something that was not a wildfire at all. If you know this fire first-hand (you live nearby, saw it, fought it or reported on it), tell us what really happened and we will check it.

Report an error
What do you think is wrong?

We will only use your email to reply about this report. Privacy. This is not an emergency service: if there is a fire now, call 193.

How we know this
  • Perimeter: GWIS (Copernicus), rebuilt from heat detections rather than mapped on imagery.
  • Dates adjusted with the VIIRS detections inside the perimeter, which said 20 October 2017 to 28 October 2017. 322 Suomi-NPP VIIRS detections on those dates.
  • We have not matched this page with any official record.
  • Weather: Copernicus ERA5 reanalysis at the fire location, in cells of about 25 km.
  • Built-up area and population come from the JRC Global Human Settlement Layer (epoch 2015, 100 m cells), summed inside the perimeter: an estimate of what was there, not a damage count.

How we build fire pages: methodology

Where this data comes from

The perimeter comes from the Copernicus Global Wildfire Information System (GWIS), which rebuilds it from MODIS and VIIRS heat detections and publishes it under CC BY 4.0. It is not measured on imagery as in Europe, so it is an estimate. Heat detections come from the VIIRS sensors aboard Suomi-NPP and NOAA-20, distributed by NASA FIRMS at 375 m resolution. Municipal boundaries come from geoBoundaries ADM2 (Creative Commons Attribution 3.0 Intergovernmental Organisations (CC BY 3.0 IGO)). The area per municipality is computed by WorldFires by crossing the perimeter with those boundaries, so it may differ from each country’s official figure.