Skip to content
worldfires
IT · Italy · –

Montallegro fire, June 2021 Montallegro, Siculiana, Agrigento

Out · last detection 29 Jun 2021, 02:05 UTC

The fire started on 28 June 2021 in Montallegro, Italy, and satellites saw it burning for 2 days. Copernicus mapped a burnt perimeter of 866 hectares from satellite imagery, spread across 4 municipalities.

It is the 11th largest in Agrigento since 2016 (of 289 with a page). Number 20 in Italy in 2021, of 291.

The power measured by the satellite is low (7.5 MW in the strongest hotspot), more typical of grass or stubble burning, or a slow surface fire, than of a large crown fire.

Burnt area
866ha
Copernicus perimeter
Duration
2days
28 Jun 2021 – 29 Jun 2021
Municipalities hit
4
municipalities
Started on
28 Jun
2021
Heat detections
50
in a single hotspot: 7 MW
Danger at start
40
Very high · FWI index
Average daily power
162MW
detected power per day, on average

Where it burned

HOTSPOTS BY DAY 28 Jun29 Jun

How it evolved, day by day

29 Jun 2021 · 162 MW · 50

Fire radiative power detected each day, in megawatts, and number of hotspots. The magenta bar marks the peak day.

The weather it burned in

34°high
42km/h · peak gust
30%lowest humidity

It had gone 15 days without rain (1 mm or more) when it started.

This area had burned before

42% of the perimeter overlaps earlier fires recorded since 2016: 329 ha in 2016, 30 ha in 2018, 26 ha in 2020. Part of it burned more than once, so the yearly figures add up to more than the 360 ha that had burned before.

How big is it?

10 km
It burned the equivalent of 0.5% of the area of London (8.7 km² against 1,583 km²).

London boundary: geoBoundaries · Office for National Statistics (Open Government Licence v3.0).

This compares size, not location: both shapes are at the same scale, north up, centred on each other.

What happened to each town

  1. Montallegro 2,377 inhabitants · 1.6 km from the centre where it started
    466 ha reached on 29 Jun
    17 %
  2. Siculiana 4,161 inhabitants · 2.3 km from the centre
    297 ha reached on 29 Jun
    7.2 %
  3. Agrigento 55,512 inhabitants · 15.9 km from the centre
    60 ha reached on 29 Jun
    0.2 %
  4. Cattolica Eraclea 3,300 inhabitants · 3.4 km from the centre
    44 ha reached on 29 Jun
    0.7 %

Burnt area inside each municipality, from crossing the official perimeter with administrative boundaries. The distance runs from the point marking the centre of each area to the nearest fire: staying a kilometre away does not mean it reached the houses.

What burned

  • Coniferous forest29 %
  • Other natural land24 %
  • Agricultural areas21 %
  • Mixed forest12 %
  • Broadleaved forest9.5 %
  • Sclerophyllous scrub3.9 %

Land cover inside the perimeter according to Corine Land Cover, as reported by Copernicus.

People and buildings inside the perimeter

GHSL 2020
Built-up area0.64 ha
Residents< 20

Inside the perimeter there were about 0.64 hectares of built-up land and almost nobody lived there (GHSL 2020, satellite-based estimate).

This is an estimate on 100 m cells, made from satellite imagery and census data: it does not mean that homes burned or that anyone was harmed. The perimeter also contains land that never burned.

Source: Global Human Settlement Layer (GHS-BUILT-S and GHS-POP R2023A), European Commission Joint Research Centre (JRC), © European Union, CC BY 4.0. Sum inside the perimeter computed by WorldFires. human-settlement.emergency.copernicus.eu

The weather day by day

ECMWF ERA5 reanalysis at the fire location, the standard reference for past weather, and the Canadian Fire Weather Index (the same system Copernicus uses), computed by WorldFires from that data. Days after the fire run until the first rain.

Open-Meteo.com (CC BY 4.0) · Copernicus Climate Change Service (ERA5)

Day High Min. humidity Peak gust Rain Danger (FWI)
28 Jun 33.0 °C 30 % 42 km/h 0.0 mm Very high 40
29 Jun 34.5 °C 32 % 34 km/h 0.0 mm Very high 39
30 Jun after 33.9 °C 33 % 47 km/h 0.0 mm Very high 40
1 Jul after 34.0 °C 34 % 30 km/h 0.0 mm High 36
2 Jul after 31.8 °C 36 % 37 km/h 0.0 mm Very high 39
3 Jul after 31.4 °C 37 % 31 km/h 0.0 mm High 37
4 Jul after 31.2 °C 33 % 37 km/h 0.0 mm Very high 43
5 Jul after 31.7 °C 42 % 46 km/h 0.0 mm Extreme 51
6 Jul after 31.1 °C 39 % 30 km/h 0.0 mm High 36
7 Jul after 31.0 °C 50 % 29 km/h 0.0 mm High 31
8 Jul after 33.6 °C 36 % 41 km/h 0.0 mm High 28
9 Jul after 32.6 °C 43 % 35 km/h 0.0 mm High 35

Its twins: fires that started in the same weather

It started with an FWI of 40.5, a minimum humidity of 30% and 15 days without rain. Fires in the area that started in weather like this since 2016: 19.

FWI at the start 40.5
Minimum humidity 30 %
Days without rain 15
this fire chosen twins rest of the area
Almost identicalSimilar

Outlines of the closest twins

Ravanusa fire, June 2024
125 ha 1 day FWI 40.6 Min. humidity 29 % 56 km away, in 2024

First rain (1 mm or more) after it ended: none in the following ten days.

What happened to them

2 days
median duration
182 ha
median area
5 %
went past 1,000 ha
19.2 mm
rain at the end (median; 3 of 19 had it)

It was 4.8 times larger than the median of its twins and lasted 2 days, against 2 days.

Only 1 of its 19 twins burned more. The weather on the first day does not explain everything: the wind in the following days, the fuel and the firefighting also count. In 16 of 19, not even 1 mm fell in the ten days after the end: they went out without rain. In the rest, the first rainy day brought a median of 19.2 mm.

This is a bank of analogues: it shows what usually happens, not what will happen. With fewer than 15 twins we give no figures. How we calculate it

How it ended

—first rain
—no rain in ten days
42km/h · max. gust

It was considered over on 29 Jun, and not even 1 mm fell in the following ten days: it went out without rain. Twins with rain when they ended: 3 of 19, with a median of 19.2 mm.

Weather on this page: Open-Meteo.com (CC BY 4.0) · Copernicus Climate Change Service (ERA5)

How a twin is chosen

  • Same area: fires that have already ended, less than 250 km from this one, since 2016.
  • Same start: we compare the FWI on the first day, the minimum humidity that day and the run of days without rain before it. The slider sets how much they may differ.
  • Only pages with final weather data (ERA5 reanalysis) calculated in the same way as this fire’s; agricultural and grass burns and pages with data under review are left out.
  • Fires burning at the same time as this one (a week before or after) are left out: they share the same spell of weather and do not count as a precedent.
  • They are sorted by similarity, and the outlines of the first five are drawn.

How we calculate it

Before and after, from space

Drag the line to compare the same ground before the fire and after it.

Before · 21 Jun 2021
After · 6 Jul 2021

If the day is cloudy, change the date: each satellite passes once a day. In false colour the burnt ground looks brown or red.

The smoke

CAMS · Copernicus

On 28 June 2021 the air beside the fire reached 46 µg/m³ of PM2.5. That day averaged 36: 2.4 times the WHO daily guideline (15).

PM2.5 peak46 µg/m³
Days over the guideline6 days
PM1084 µg/m³
26 Jun28 Jun30 Jun2 Jul
Good Fair Moderate Poor Very poor Extremely poor

Particles from the Copernicus CAMS model at the centre of the perimeter; these are not measurements in each town. The pale bar is the worst hour, the solid one the daily average.

Open-Meteo.com (CC BY 4.0) · Copernicus Atmosphere Monitoring Service (CAMS)

Detections table · 50Every satellite heat detection, one by one, with time, satellite, power and coordinates.
⬇ Download CSV Times in UTC. Each detection is a 375 m pixel: a large fire yields hundreds per pass.
Date and timeSatelliteFRP (MW)LatLon

Other fires nearby

All fires in Italy

Frequently asked questions

How long did the Montallegro fire last?
Copernicus dates it between 28 June 2021 and 29 June 2021: 2 days between the first and last image with fire.
How much area did it burn?
The perimeter Copernicus measured from satellite imagery is 866 hectares (8.7 km²). Official national figures may differ.
Which municipalities burned?
The fire entered 4 municipalities: Montallegro (466 ha, 17 %); Siculiana (297 ha, 7.2 %); Agrigento (60 ha, 0.2 %); Cattolica Eraclea (44 ha, 0.7 %).
Did the fire reach a town?
The fire started in Montallegro and came within 1.6 km of its centre. That is the distance from the perimeter, or the nearest hotspot, to the point marking the centre; it does not mean it entered the houses.
What was the weather like?
During the fire the temperature reached 34.5 °C, humidity dropped to 30 % and gusts hit 42 km/h. The fire danger index (FWI) reached 40, class Very high.
Where does this data come from?
From the EFFIS (Copernicus) burnt perimeter, NASA FIRMS VIIRS hotspots and the administrative boundaries of Italy (geoBoundaries). It is not an official report.
How did the fires that started in similar weather in this area end?
Fires less than 250 km away that started since 2016 with a similar FWI, humidity and dry spell: 19. Their median duration was 2 days and their median area 182 ha; 5 % went past 1,000 ha. Only 1 of its 19 twins burned more. The weather on the first day does not explain everything: the wind in the following days, the fuel and the firefighting also count. In 16 of 19, not even 1 mm fell in the ten days after the end: they went out without rain. In the rest, the first rainy day brought a median of 19.2 mm.

Where to verify it

A satellite detection is not an official report. Final figures and the fire’s status are published by each country’s emergency service.

Emergency number: 112 · 1515 · Emergency number and official warnings

Satellite cross-check

History of this page Changes in area, dates, name, official record or merged pages, compared every night since 24 October 2026.

Does something look wrong on this page?

This page is built from satellite data and official records, and it sometimes gets things wrong: the wrong dates, the wrong town, two fires merged into one, or something that was not a wildfire at all. If you know this fire first-hand (you live nearby, saw it, fought it or reported on it), tell us what really happened and we will check it.

Report an error
What do you think is wrong?

We will only use your email to reply about this report. Privacy. This is not an emergency service: if there is a fire now, call 112 · 1515.

How we know this
  • Perimeter: EFFIS (Copernicus), mapped on satellite imagery.
  • Dates from the perimeter: the VIIRS detections inside it did not change them. 50 Suomi-NPP VIIRS detections on those dates.
  • We have not matched this page with any official record.
  • Weather: Copernicus ERA5 reanalysis at the fire location, in cells of about 25 km.
  • Built-up area and population come from the JRC Global Human Settlement Layer (epoch 2020, 100 m cells), summed inside the perimeter: an estimate of what was there, not a damage count.

How we build fire pages: methodology

Where this data comes from

The perimeter and land cover come from the Copernicus European Forest Fire Information System (EFFIS), measured on MODIS and Sentinel-2 imagery and published under CC BY 4.0. Heat detections come from the VIIRS sensors aboard Suomi-NPP and NOAA-20, distributed by NASA FIRMS at 375 m resolution. Municipal boundaries come from geoBoundaries ADM4 (Creative Commons Attribution 3.0 License). The area per municipality is computed by WorldFires by crossing the perimeter with those boundaries, so it may differ slightly from each country’s official figure.