Skip to content
worldfires
ZA · South Africa · –

Modimolle/Mookgophong fire, July 2023 Modimolle/Mookgophong, Lephalale, Thabazimbi

Out · last detection

The fire started on in Modimolle/Mookgophong, South Africa, and satellites saw it burning for 8 days. Copernicus’s global GWIS system rebuilt a burnt perimeter of 6,067 hectares from heat detections, spread across 3 municipalities.

It is number 19 by size of the 161 fires with a page that started in Limpopo since 2016. Number 22 in South Africa in 2023, of 150.

Burnt area
6,067ha
GWIS perimeter (Copernicus)
Duration
8days
3 Jul 2023 – 10 Jul 2023
Municipalities hit
3
municipalities
Started on
3 Jul
2023
Heat detections
358
in a single hotspot: 193 MW
Danger at start
22
High · FWI index
Average daily power
547MW
detected power per day, on average

Where it burned

HOTSPOTS BY DAY 3 Jul10 Jul
10 Jul 2023

How it evolved, day by day

4 Jul 2023 · 7 MW · 1 5 Jul 2023 · 630 MW · 57 6 Jul 2023 · 68 MW · 23 7 Jul 2023 · 2,303 MW · 127 8 Jul 2023 · 551 MW · 97 9 Jul 2023 · 231 MW · 46 10 Jul 2023 · 36 MW · 7
4 Jul 7 Jul 10 Jul

Fire radiative power detected each day, in megawatts, and number of hotspots. The magenta bar marks the peak day.

The weather it burned in

21°high
55km/h · peak gust
20%lowest humidity

It had gone 4 days without rain (1 mm or more) when it started.

This area had burned before

97% of the perimeter overlaps earlier fires recorded since 2016: 5,483 ha in 2017, 3,588 ha in 2019, 36 ha in 2021. Part of it burned more than once, so the yearly figures add up to more than the 5,869 ha that had burned before.

How big is it?

10 km
It burned the equivalent of 3.8% of the area of London (61 km² against 1,583 km²).

London boundary: geoBoundaries · Office for National Statistics (Open Government Licence v3.0).

This compares size, not location: both shapes are at the same scale, north up, centred on each other.

What happened to each town

  1. Modimolle/Mookgophong where it started
    4,325 ha reached on 4 Jul
    0.4 %
  2. 1,733 ha reached on 5 Jul
    0.1 %
  3. 43 ha
    0.0 %

Burnt area inside each municipality, from crossing the GWIS perimeter with administrative boundaries. The distance runs from the point marking the centre of each area to the nearest fire: staying a kilometre away does not mean it reached the houses.

People and buildings inside the perimeter

GHSL 2025
Built-up area< 0.1 ha
Residents< 20

Inside the perimeter there was no noticeable built-up land and almost nobody lived there (GHSL 2025, satellite-based estimate).

This is an estimate on 100 m cells, made from satellite imagery and census data: it does not mean that homes burned or that anyone was harmed. The perimeter also contains land that never burned. The GHSL 2025 epoch is a projection made from 2020 and earlier data.

Source: Global Human Settlement Layer (GHS-BUILT-S and GHS-POP R2023A), European Commission Joint Research Centre (JRC), © European Union, CC BY 4.0. Sum inside the perimeter computed by WorldFires. human-settlement.emergency.copernicus.eu

The weather day by day

ECMWF ERA5 reanalysis at the fire location, the standard reference for past weather, and the Canadian Fire Weather Index (the same system Copernicus uses), computed by WorldFires from that data. Days after the fire run until the first rain.

Open-Meteo.com (CC BY 4.0) · Copernicus Climate Change Service (ERA5)

Day High Min. humidity Peak gust Rain Danger (FWI)
3 Jul 19.9 °C 29 % 20 km/h 0.0 mm High 22
4 Jul 18.4 °C 35 % 20 km/h 0.2 mm High 22
5 Jul 20.6 °C 20 % 26 km/h 0.0 mm High 32
6 Jul 18.8 °C 34 % 26 km/h 0.0 mm High 26
7 Jul 19.3 °C 27 % 26 km/h 0.0 mm High 25
8 Jul 20.0 °C 25 % 32 km/h 0.0 mm High 31
9 Jul 18.6 °C 25 % 42 km/h 0.0 mm High 37
10 Jul 11.4 °C 24 % 55 km/h 0.0 mm Very high 41
11 Jul after 14.9 °C 25 % 43 km/h 0.0 mm High 37
12 Jul after 16.3 °C 33 % 29 km/h 0.0 mm High 29
13 Jul after 17.0 °C 30 % 21 km/h 0.0 mm High 25
14 Jul after 16.3 °C 27 % 33 km/h 0.0 mm High 33
15 Jul after 16.5 °C 33 % 29 km/h 0.0 mm High 26
16 Jul after 20.0 °C 23 % 26 km/h 0.0 mm High 29
17 Jul after 22.1 °C 19 % 22 km/h 0.0 mm High 33
18 Jul after 21.2 °C 22 % 18 km/h 0.0 mm High 30
19 Jul after 21.7 °C 17 % 24 km/h 0.0 mm Very high 38
20 Jul after 19.8 °C 32 % 42 km/h 0.2 mm Very high 42

Its twins: fires that started in the same weather

It started with an FWI of 22.2, a minimum humidity of 29% and 4 days without rain. Fires in the area that started in weather like this since 2016: 12.

FWI at the start 22.2
Minimum humidity 29 %
Days without rain 4
this fire chosen twins rest of the area
Almost identicalSimilar

Outlines of the closest twins

Modimolle/Mookgophong fire, October 2021
9,364 ha 8 days FWI 17.0 Min. humidity 30 % 13 km away, in 2021

First rain (1 mm or more) after it ended: 1.0 mm on 6 Nov.

What happened to them

Fires in the area that started in similar weather: 12. With fewer than 15 we give no figures: they would be more noise than signal.

This is a bank of analogues: it shows what usually happens, not what will happen. With fewer than 15 twins we give no figures. How we calculate it

How it ended

—first rain
—no rain in ten days
55km/h · max. gust

It was considered over on 10 Jul, and not even 1 mm fell in the following ten days: it went out without rain.

Weather on this page: Open-Meteo.com (CC BY 4.0) · Copernicus Climate Change Service (ERA5)

How a twin is chosen

  • Same area: fires that have already ended, less than 250 km from this one, since 2016.
  • Same start: we compare the FWI on the first day, the minimum humidity that day and the run of days without rain before it. The slider sets how much they may differ.
  • Only pages with final weather data (ERA5 reanalysis) calculated in the same way as this fire’s; agricultural and grass burns and pages with data under review are left out.
  • Fires burning at the same time as this one (a week before or after) are left out: they share the same spell of weather and do not count as a precedent.
  • They are sorted by similarity, and the outlines of the first five are drawn.

How we calculate it

Before and after, from space

Drag the line to compare the same ground before the fire and after it.

Before · 26 Jun 2023
After · 17 Jul 2023

If the day is cloudy, change the date: each satellite passes once a day. In false colour the burnt ground looks brown or red.

The smoke

CAMS · Copernicus

On 6 July 2023 the air beside the fire reached 83 µg/m³ of PM2.5. That day averaged 50: 3.3 times the WHO daily guideline (15).

PM2.5 peak83 µg/m³
Days over the guideline3 days
PM10119 µg/m³
Optical depth0.66
3 Jul6 Jul9 Jul12 Jul
Good Fair Moderate Poor Very poor Extremely poor

Particles from the Copernicus CAMS model at the centre of the perimeter; these are not measurements in each town. The pale bar is the worst hour, the solid one the daily average.

Open-Meteo.com (CC BY 4.0) · Copernicus Atmosphere Monitoring Service (CAMS)

Detections table · 358Every satellite heat detection, one by one, with time, satellite, power and coordinates.
⬇ Download CSV Times in UTC. Each detection is a 375 m pixel: a large fire yields hundreds per pass.
Date and timeSatelliteFRP (MW)LatLon

Other fires nearby

All fires in South Africa

Frequently asked questions

How long did the Modimolle/Mookgophong fire last?
According to the heat detections seen by satellite inside the perimeter, it burned from 3 July 2023 to 10 July 2023 (8 days). The perimeter dates it from 5 July 2023 to 10 July 2023.
How much area did it burn?
The perimeter GWIS (Copernicus) rebuilt from heat detections is 6,067 hectares (60.7 km²). It is an estimate: official national figures may differ.
Which municipalities burned?
The fire entered 3 municipalities: Modimolle/Mookgophong (4,325 ha, 0.4 %); Lephalale (1,733 ha, 0.1 %); Thabazimbi (43 ha, 0.0 %).
What was the weather like?
During the fire the temperature reached 20.6 °C, humidity dropped to 20 % and gusts hit 55 km/h. The fire danger index (FWI) reached 41, class Very high.
Where does this data come from?
From the GWIS (Copernicus) burnt perimeter, NASA FIRMS VIIRS hotspots and the administrative boundaries of South Africa (geoBoundaries). It is not an official report.

Where to verify it

A satellite detection is not an official report. Final figures and the fire’s status are published by each country’s emergency service.

Emergency number: 10177 · 112 · Emergency number and official warnings

Satellite cross-check

History of this page · 1 Changes in area, dates, name, official record or merged pages, compared every night since 24 October 2026.
  1. Start date: 5 July 2023 → 3 July 2023.

RSS Changes to this page With cross-checks and a citable version

Does something look wrong on this page?

This page is built from satellite data and official records, and it sometimes gets things wrong: the wrong dates, the wrong town, two fires merged into one, or something that was not a wildfire at all. If you know this fire first-hand (you live nearby, saw it, fought it or reported on it), tell us what really happened and we will check it.

Report an error
What do you think is wrong?

We will only use your email to reply about this report. Privacy. This is not an emergency service: if there is a fire now, call 10177 · 112.

How we know this
  • Perimeter: GWIS (Copernicus), rebuilt from heat detections rather than mapped on imagery.
  • Dates adjusted with the VIIRS detections inside the perimeter, which said 5 July 2023 to 10 July 2023. 358 Suomi-NPP VIIRS detections on those dates.
  • We have not matched this page with any official record.
  • Weather: Copernicus ERA5 reanalysis at the fire location, in cells of about 25 km.
  • Built-up area and population come from the JRC Global Human Settlement Layer (epoch 2025, 100 m cells), summed inside the perimeter: an estimate of what was there, not a damage count.

How we build fire pages: methodology

Where this data comes from

The perimeter comes from the Copernicus Global Wildfire Information System (GWIS), which rebuilds it from MODIS and VIIRS heat detections and publishes it under CC BY 4.0. It is not measured on imagery as in Europe, so it is an estimate. Heat detections come from the VIIRS sensors aboard Suomi-NPP and NOAA-20, distributed by NASA FIRMS at 375 m resolution. Municipal boundaries come from geoBoundaries ADM3 (Creative Commons Attribution 3.0 Intergovernmental Organisations (CC BY 3.0 IGO)). The area per municipality is computed by WorldFires by crossing the perimeter with those boundaries, so it may differ from each country’s official figure.