Skip to content
worldfires
MZ · Mozambique · →

Mocuba fire, 19 August 2026 Mocuba, Maganja Da Costa, Mocubela

Out · last detection 29 Sept 2026, 10:41 UTC

The fire started on 19 August 2026 in Mocuba, Mozambique, and satellites saw it burning for 42 days. Copernicus’s global GWIS system rebuilt a burnt perimeter of 157,003 hectares from heat detections, spread across 3 municipalities.

This page is probably a fire complex, not a single fire. GWIS merges into one perimeter the fires that touch over weeks, which in large burning seasons can join dozens of separate fires. The total area is reliable; the origin and dates refer to the whole complex.

Other fire pages in the same area and on the same dates:

It is the 6th largest in Zambézia since 2016 (of 842 with a page). Number 3 in Mozambique in 2026, of 537.

Compare with…
Burnt area
157,003ha
GWIS perimeter (Copernicus)
Duration
42days
19 Aug 2026 – 29 Sept 2026
Municipalities hit
3
districts
Started on
19 Aug
2026
Heat detections
5,077
in a single hotspot: 121 MW
Danger at start
27
High · FWI index
Average daily power
1.1GW
detected power per day, on average

Where it burned

HOTSPOTS BY DAY 19 Aug29 Sept
29 Sept 2026

How it evolved, day by day

19 Aug 2026 · 18 MW · 3 20 Aug 2026 · 62 MW · 8 21 Aug 2026 · 318 MW · 51 22 Aug 2026 · 338 MW · 36 23 Aug 2026 · 316 MW · 37 24 Aug 2026 · 117 MW · 20 25 Aug 2026 · 433 MW · 32 26 Aug 2026 · 174 MW · 35 27 Aug 2026 · 205 MW · 27 28 Aug 2026 · 34 MW · 7 29 Aug 2026 · 14 MW · 3 30 Aug 2026 · 1,295 MW · 170 31 Aug 2026 · 3,825 MW · 493 1 Sept 2026 · 1,554 MW · 208 2 Sept 2026 · 1,173 MW · 98 3 Sept 2026 · 1,732 MW · 154 4 Sept 2026 · 4,674 MW · 448 5 Sept 2026 · 2,658 MW · 369 6 Sept 2026 · 1,401 MW · 214 7 Sept 2026 · 611 MW · 64 11 Sept 2026 · 212 MW · 33 12 Sept 2026 · 972 MW · 111 13 Sept 2026 · 596 MW · 80 14 Sept 2026 · 1,144 MW · 150 15 Sept 2026 · 4,637 MW · 538 16 Sept 2026 · 4,720 MW · 686 17 Sept 2026 · 2,696 MW · 297 18 Sept 2026 · 1,278 MW · 132 19 Sept 2026 · 240 MW · 26 20 Sept 2026 · 1,038 MW · 83 21 Sept 2026 · 581 MW · 94 22 Sept 2026 · 205 MW · 43 23 Sept 2026 · 193 MW · 32 24 Sept 2026 · 347 MW · 34 25 Sept 2026 · 49 MW · 10 26 Sept 2026 · 157 MW · 29 27 Sept 2026 · 1,114 MW · 130 28 Sept 2026 · 484 MW · 80 29 Sept 2026 · 110 MW · 12
19 Aug 25 Aug 31 Aug 6 Sept 15 Sept 16 Sept 21 Sept 27 Sept

Fire radiative power detected each day, in megawatts, and number of hotspots. The magenta bar marks the peak day.

The weather it burned in

35°high
44km/h · peak gust
22%lowest humidity

It had gone 5 days without rain (1 mm or more) when it started. Rain came after the fire: 4.6 mm on 9 Sept.

This area had burned before

36% of the perimeter overlaps earlier fires recorded since 2016: 12,190 ha in 2016, 2,843 ha in 2017, 16,097 ha in 2018, 4,030 ha in 2019, 7,401 ha in 2020, 20,513 ha in 2021, 8,096 ha in 2022, 16,102 ha in 2023, 11,082 ha in 2024, 33,408 ha in 2025. Part of it burned more than once, so the yearly figures add up to more than the 56,048 ha that had burned before.

How big is it?

10 km
It burned almost the same area as London (1,570 km² against 1,583 km²).

London boundary: geoBoundaries · Office for National Statistics (Open Government Licence v3.0).

This compares size, not location: both shapes are at the same scale, north up, centred on each other.

What happened to each town

  1. Mocuba where it started
    86,102 ha reached on 19 Aug
    9.8 %
  2. 45,398 ha reached on 22 Aug
    16 %
  3. 26,385 ha reached on 20 Aug
    5.5 %

Burnt area inside each municipality, from crossing the GWIS perimeter with administrative boundaries. The distance runs from the point marking the centre of each area to the nearest fire: staying a kilometre away does not mean it reached the houses.

People and buildings inside the perimeter

GHSL 2025
Built-up area103 ha
Residents≈ 19,000

Inside the perimeter there were about 103 hectares of built-up land and about 19,000 residents (GHSL 2025, satellite-based estimate).

This is an estimate on 100 m cells, made from satellite imagery and census data: it does not mean that homes burned or that anyone was harmed. The perimeter also contains land that never burned. The GHSL 2025 epoch is a projection made from 2020 and earlier data.

Source: Global Human Settlement Layer (GHS-BUILT-S and GHS-POP R2023A), European Commission Joint Research Centre (JRC), © European Union, CC BY 4.0. Sum inside the perimeter computed by WorldFires. human-settlement.emergency.copernicus.eu

The weather day by day

ECMWF ERA5 reanalysis at the fire location, the standard reference for past weather, and the Canadian Fire Weather Index (the same system Copernicus uses), computed by WorldFires from that data. Days after the fire run until the first rain.

Open-Meteo.com (CC BY 4.0) · Copernicus Climate Change Service (ERA5)

Day High Min. humidity Peak gust Rain Danger (FWI)
25 Aug 29.7 °C 40 % 28 km/h 0.0 mm High 27
26 Aug 28.8 °C 45 % 35 km/h 0.0 mm High 28
27 Aug 26.8 °C 48 % 41 km/h 0.8 mm Moderate 20
28 Aug 26.9 °C 60 % 33 km/h 1.8 mm Low 8
29 Aug 27.4 °C 51 % 24 km/h 0.4 mm Moderate 13
30 Aug 32.7 °C 32 % 36 km/h 0.0 mm High 28
31 Aug 34.3 °C 23 % 40 km/h 0.0 mm Very high 38
1 Sept 32.4 °C 29 % 40 km/h 0.0 mm Very high 39
2 Sept 32.1 °C 34 % 33 km/h 0.0 mm High 34
3 Sept 34.0 °C 24 % 30 km/h 0.0 mm High 36
4 Sept 35.2 °C 22 % 41 km/h 0.0 mm Very high 41
5 Sept 34.1 °C 31 % 39 km/h 0.0 mm Very high 41
6 Sept 31.3 °C 42 % 33 km/h 0.0 mm High 32
7 Sept 30.0 °C 39 % 44 km/h 0.2 mm High 33
8 Sept 25.1 °C 53 % 44 km/h 0.8 mm Moderate 21
9 Sept 26.8 °C 59 % 30 km/h 4.6 mm Very low 4

Before and after, from space

Drag the line to compare the same ground before the fire and after it.

Before · 12 Aug 2026
After · 6 Oct 2026

If the day is cloudy, change the date: each satellite passes once a day. In false colour the burnt ground looks brown or red.

The smoke

CAMS · Copernicus

On 1 September 2026 the air beside the fire reached 75 µg/m³ of PM2.5. That day averaged 38: 2.5 times the WHO daily guideline (15).

PM2.5 peak75 µg/m³
Days over the guideline11 days
PM1077 µg/m³
Optical depth0.90
23242526272829303112345678910
Good Fair Moderate Poor Very poor Extremely poor

Particles from the Copernicus CAMS model at the centre of the perimeter; these are not measurements in each town. The pale bar is the worst hour, the solid one the daily average.

Open-Meteo.com (CC BY 4.0) · Copernicus Atmosphere Monitoring Service (CAMS)

Detections table · 5,077Every satellite heat detection, one by one, with time, satellite, power and coordinates.
⬇ Download CSV Times in UTC. Each detection is a 375 m pixel: a large fire yields hundreds per pass.
Date and timeSatelliteFRP (MW)LatLon

Other fires nearby

All fires in Mozambique ›

Frequently asked questions

How long did the Mocuba fire last?
According to the heat detections seen by satellite inside the perimeter, it burned from 19 August 2026 to 29 September 2026 (42 days). The perimeter dates it from 25 August 2026 to 28 September 2026.
How much area did it burn?
The perimeter GWIS (Copernicus) rebuilt from heat detections is 157,003 hectares (1,570.0 km²). It is an estimate: official national figures may differ.
Which municipalities burned?
The fire entered 3 municipalities: Mocuba (86,102 ha, 9.8 %); Maganja Da Costa (45,398 ha, 16 %); Mocubela (26,385 ha, 5.5 %).
Is the Mocuba fire still active?
No fire detections since 29 Sept 2026, 10:41 UTC. A lack of detections is not an official extinction.
What was the weather like?
During the fire the temperature reached 35.2 °C, humidity dropped to 22 % and gusts hit 44 km/h. The fire danger index (FWI) reached 41, class Very high.
Where does this data come from?
From the GWIS (Copernicus) burnt perimeter, NASA FIRMS VIIRS hotspots and the administrative boundaries of Mozambique (geoBoundaries). It is not an official report.

Where to verify it

A satellite detection is not an official report. Final figures and the fire’s status are published by each country’s emergency service.

Satellite cross-check

History of this page Changes in area, dates, name, official record or merged pages, compared every night since 24 October 2026.

No changes since 24 October 2026.

RSS Changes to this page

Does something look wrong on this page?

This page is built from satellite data and official records, and it sometimes gets things wrong: the wrong dates, the wrong town, two fires merged into one, or something that was not a wildfire at all. If you know this fire first-hand (you live nearby, saw it, fought it or reported on it), tell us what really happened and we will check it.

Report an error
What do you think is wrong?

We will only use your email to reply about this report. Privacy.

How we know this
  • Perimeter: GWIS (Copernicus), rebuilt from heat detections rather than mapped on imagery; 14 polygons grouped in this page.
  • Dates adjusted with the VIIRS detections inside the perimeter, which said 25 August 2026 to 28 September 2026. 5,077 Suomi-NPP VIIRS detections on those dates.
  • We have not matched this page with any official record.
  • Weather: Copernicus ERA5 reanalysis at the fire location, in cells of about 25 km.
  • Built-up area and population come from the JRC Global Human Settlement Layer (epoch 2025, 100 m cells), summed inside the perimeter: an estimate of what was there, not a damage count.

How we build fire pages: methodology ›

Where this data comes from

The perimeter comes from the Copernicus Global Wildfire Information System (GWIS), which rebuilds it from MODIS and VIIRS heat detections and publishes it under CC BY 4.0. It is not measured on imagery as in Europe, so it is an estimate. Heat detections come from the VIIRS sensors aboard Suomi-NPP and NOAA-20, distributed by NASA FIRMS at 375 m resolution. Municipal boundaries come from geoBoundaries ADM2 (Creative Commons Attribution 3.0 Intergovernmental Organisations (CC BY 3.0 IGO)). The area per municipality is computed by WorldFires by crossing the perimeter with those boundaries, so it may differ from each country’s official figure.