Skip to content
worldfires
PG · Papua New Guinea · –

Middle Fly District fire, 26 September 2026 Middle Fly District

Out · last detection 12 Nov 2026, 04:33 UTC

The fire started on 26 September 2026 in Middle Fly District, Papua New Guinea, and satellites saw it burning for 48 days. Copernicus’s global GWIS system rebuilt a burnt perimeter of 40,712 hectares from heat detections, spread across a single municipality.

This page is probably a fire complex, not a single fire. GWIS merges into one perimeter the fires that touch over weeks, which in large burning seasons can join dozens of separate fires. The total area is reliable; the origin and dates refer to the whole complex.

Other fire pages in the same area and on the same dates:

Number 5 in Papua New Guinea in 2026, of 198.

GWIS near-real-time perimeter, from the layer that changed in October 2025: this fire is not compared with fires from earlier years, because since then the GWIS layer gives more and larger perimeters.

Burnt area
40,712ha
GWIS perimeter (Copernicus)
Duration
48days
26 Sept 2026 – 12 Nov 2026
Municipalities hit
1
districts
Started on
26 Sept
2026
Heat detections
1,465
in a single hotspot: 257 MW
Danger at start
27
High · FWI index
Average daily power
358MW
detected power per day, on average

Where it burned

HOTSPOTS BY DAY 26 Sept12 Nov
12 Nov 2026

How it evolved, day by day

26 Sept 2026 · 5 MW · 1 27 Sept 2026 · 33 MW · 6 28 Sept 2026 · 373 MW · 26 29 Sept 2026 · 3 MW · 1 1 Oct 2026 · 739 MW · 41 2 Oct 2026 · 777 MW · 51 4 Oct 2026 · 21 MW · 5 5 Oct 2026 · 76 MW · 15 6 Oct 2026 · 826 MW · 71 7 Oct 2026 · 1,986 MW · 158 8 Oct 2026 · 1,273 MW · 114 9 Oct 2026 · 874 MW · 95 10 Oct 2026 · 791 MW · 63 11 Oct 2026 · 702 MW · 61 12 Oct 2026 · 501 MW · 62 14 Oct 2026 · 11 MW · 3 15 Oct 2026 · 19 MW · 2 16 Oct 2026 · 10 MW · 7 17 Oct 2026 · 1,472 MW · 192 18 Oct 2026 · 302 MW · 40 19 Oct 2026 · 1,327 MW · 139 20 Oct 2026 · 3 MW · 2 21 Oct 2026 · 21 MW · 9 22 Oct 2026 · 42 MW · 6 23 Oct 2026 · 35 MW · 6 24 Oct 2026 · 49 MW · 9 25 Oct 2026 · 0 MW · 0 26 Oct 2026 · 0 MW · 0 27 Oct 2026 · 3 MW · 2 28 Oct 2026 · 6 MW · 1 29 Oct 2026 · 3 MW · 1 30 Oct 2026 · 0 MW · 0 31 Oct 2026 · 74 MW · 11 1 Nov 2026 · 28 MW · 7 2 Nov 2026 · 50 MW · 10 3 Nov 2026 · 95 MW · 8 4 Nov 2026 · 206 MW · 44 5 Nov 2026 · 808 MW · 82 6 Nov 2026 · 0 MW · 0 7 Nov 2026 · 0 MW · 0 8 Nov 2026 · 107 MW · 10 9 Nov 2026 · 83 MW · 17 10 Nov 2026 · 51 MW · 8 11 Nov 2026 · 523 MW · 78 12 Nov 2026 · 11 MW · 1
26 Sept 7 Oct 17 Oct 26 Oct 4 Nov

Fire radiative power detected each day, in megawatts, and number of hotspots. The magenta bar marks the peak day.

Fire front film How it spread from one satellite pass to the next (124 passes) and with what wind. Watch the film

The weather it burned in

37°high
45km/h · peak gust
21%lowest humidity

It had gone 3 days without rain (1 mm or more) when it started. Rain came after the fire: 11.8 mm on 13 Nov.

This area had burned before

No earlier perimeters overlap this fire since 2016, when the satellite record begins.

How big is it?

10 km
It burned the equivalent of 26% of the area of London (407 km² against 1,583 km²).

London boundary: geoBoundaries · Office for National Statistics (Open Government Licence v3.0).

This compares size, not location: both shapes are at the same scale, north up, centred on each other.

What happened to each town

  1. Middle Fly District where it started
    37,854 ha reached on 26 Sept
    0.7 %

Burnt area inside each municipality, from crossing the GWIS perimeter with administrative boundaries. The distance runs from the point marking the centre of each area to the nearest fire: staying a kilometre away does not mean it reached the houses.

People and buildings inside the perimeter

GHSL 2025
Built-up area< 0.1 ha
Residents≈ 20

Inside the perimeter there were about 0.04 hectares of built-up land and about 20 residents (GHSL 2025, satellite-based estimate).

This is an estimate on 100 m cells, made from satellite imagery and census data: it does not mean that homes burned or that anyone was harmed. The perimeter also contains land that never burned. The GHSL 2025 epoch is a projection made from 2020 and earlier data.

Source: Global Human Settlement Layer (GHS-BUILT-S and GHS-POP R2023A), European Commission Joint Research Centre (JRC), © European Union, CC BY 4.0. Sum inside the perimeter computed by WorldFires. human-settlement.emergency.copernicus.eu

The weather day by day

ECMWF ERA5 reanalysis at the fire location, the standard reference for past weather, and the Canadian Fire Weather Index (the same system Copernicus uses), computed by WorldFires from that data. Days after the fire run until the first rain.

Open-Meteo.com (CC BY 4.0) · forecast models, provisional until the ERA5 reanalysis arrives

Day High Min. humidity Peak gust Rain Danger (FWI)
26 Sept 32.7 °C 42 % 39 km/h 0.5 mm High 27
27 Sept 33.2 °C 40 % 40 km/h 0.2 mm High 31
28 Sept 32.6 °C 43 % 38 km/h 1.0 mm High 27
29 Sept 33.6 °C 39 % 34 km/h 0.3 mm High 27
30 Sept 34.3 °C 37 % 44 km/h 0.0 mm High 33
1 Oct 32.2 °C 51 % 45 km/h 1.6 mm High 27
2 Oct 32.6 °C 46 % 41 km/h 0.7 mm High 26
3 Oct 32.4 °C 42 % 35 km/h 0.3 mm High 25
4 Oct 32.4 °C 42 % 39 km/h 0.1 mm High 30
5 Oct 34.0 °C 36 % 37 km/h 0.0 mm High 32
6 Oct 34.1 °C 36 % 37 km/h 0.0 mm High 32
7 Oct 34.3 °C 33 % 31 km/h 0.0 mm High 28
8 Oct 36.0 °C 21 % 30 km/h 0.0 mm High 28
9 Oct 35.5 °C 29 % 31 km/h 0.0 mm High 28
10 Oct 35.2 °C 28 % 34 km/h 0.0 mm High 31
11 Oct 35.3 °C 27 % 37 km/h 0.0 mm High 35
12 Oct 34.9 °C 32 % 35 km/h 0.0 mm High 36
13 Oct 34.8 °C 37 % 40 km/h 0.2 mm High 32
14 Oct 35.0 °C 40 % 36 km/h 0.9 mm High 27
15 Oct 34.7 °C 43 % 33 km/h 1.3 mm High 27
16 Oct 34.8 °C 34 % 38 km/h 0.0 mm High 35
17 Oct 35.7 °C 29 % 34 km/h 0.0 mm High 34
18 Oct 35.3 °C 28 % 35 km/h 0.2 mm High 32
19 Oct 35.5 °C 26 % 36 km/h 0.3 mm High 34
20 Oct 35.7 °C 32 % 35 km/h 0.0 mm High 36
21 Oct 36.0 °C 39 % 35 km/h 0.2 mm High 36
22 Oct 36.0 °C 36 % 34 km/h 0.8 mm High 32
23 Oct 36.3 °C 39 % 38 km/h 0.5 mm High 29
24 Oct 36.6 °C 38 % 36 km/h 0.4 mm High 30
25 Oct 36.4 °C 38 % 28 km/h 0.4 mm High 31
26 Oct 36.8 °C 33 % 29 km/h 0.5 mm High 31
27 Oct 36.3 °C 34 % 36 km/h 1.3 mm Moderate 21
28 Oct 36.3 °C 35 % 36 km/h 1.2 mm High 22
29 Oct 37.0 °C 41 % 34 km/h 3.6 mm High 23
30 Oct 37.0 °C 36 % 32 km/h 0.2 mm Moderate 16
31 Oct 36.3 °C 38 % 32 km/h 0.5 mm High 28
1 Nov 35.7 °C 42 % 25 km/h 7.2 mm High 22
2 Nov 31.5 °C 61 % 20 km/h 4.1 mm Very low 2
3 Nov 33.9 °C 45 % 26 km/h 1.0 mm Very low 2
4 Nov 35.1 °C 37 % 26 km/h 0.2 mm Moderate 12
5 Nov 36.0 °C 29 % 28 km/h 0.0 mm Moderate 18
6 Nov 35.6 °C 38 % 27 km/h 0.4 mm Moderate 19
7 Nov 35.9 °C 38 % 31 km/h 0.6 mm Moderate 21
8 Nov 36.8 °C 36 % 30 km/h 1.5 mm Moderate 20
9 Nov 33.6 °C 48 % 19 km/h 6.1 mm Very low 2
10 Nov 34.2 °C 52 % 26 km/h 3.6 mm Very low 3
11 Nov 34.5 °C 49 % 37 km/h 1.9 mm Moderate 11
12 Nov 35.4 °C 45 % 31 km/h 7.3 mm Moderate 11
13 Nov after 33.8 °C 56 % 29 km/h 11.8 mm Very low 1

Before and after, from space

Drag the line to compare the same ground before the fire and after it.

Before · 19 Sept 2026
After · 18 Nov 2026

If the day is cloudy, change the date: each satellite passes once a day. In false colour the burnt ground looks brown or red.

The smoke

CAMS · Copernicus

On 8 October 2026 the air beside the fire reached 65 µg/m³ of PM2.5. That day averaged 26: 1.7 times the WHO daily guideline (15).

PM2.5 peak65 µg/m³
Days over the guideline16 days
PM1068 µg/m³
Optical depth1.54
24 Sept3 Oct12 Oct21 Oct30 Oct
Good Fair Moderate Poor Very poor Extremely poor

Particles from the Copernicus CAMS model at the centre of the perimeter; these are not measurements in each town. The pale bar is the worst hour, the solid one the daily average.

Open-Meteo.com (CC BY 4.0) · Copernicus Atmosphere Monitoring Service (CAMS)

Detections table · 1,465Every satellite heat detection, one by one, with time, satellite, power and coordinates.
⬇ Download CSV Times in UTC. Each detection is a 375 m pixel: a large fire yields hundreds per pass.
Date and timeSatelliteFRP (MW)LatLon

Other fires nearby

All fires in Papua New Guinea

Frequently asked questions

How long did the Middle Fly District fire last?
GWIS (Copernicus) dates it between 26 September 2026 and 12 November 2026: 48 days between the first and last heat detection of the perimeter.
How much area did it burn?
The perimeter GWIS (Copernicus) rebuilt from heat detections is 40,712 hectares (407.1 km²). It is an estimate: official national figures may differ.
Which municipalities burned?
The fire only entered Middle Fly District (37,854 ha, 0.7 %).
Is the Middle Fly District fire still active?
No fire detections since 12 Nov 2026, 04:33 UTC. A lack of detections is not an official extinction.
What was the weather like?
During the fire the temperature reached 37.0 °C, humidity dropped to 21 % and gusts hit 45 km/h. The fire danger index (FWI) reached 36, class High.
Where does this data come from?
From the GWIS (Copernicus) burnt perimeter, NASA FIRMS VIIRS hotspots and the administrative boundaries of Papua New Guinea (geoBoundaries). It is not an official report.

Where to verify it

A satellite detection is not an official report. Final figures and the fire’s status are published by each country’s emergency service.

Satellite cross-check

History of this page · 5 Changes in area, dates, name, official record or merged pages, compared every night since 5 November 2026.
  1. Last day with fire: 5 November 2026 → 12 November 2026.
  2. Area: 37,435 → 40,712 ha.
  3. Area: 34,949 → 37,435 ha.
  4. Area: 33,953 → 34,949 ha.
  5. Page published (33,953 ha).

RSS Changes to this page With cross-checks and a citable version

Does something look wrong on this page?

This page is built from satellite data and official records, and it sometimes gets things wrong: the wrong dates, the wrong town, two fires merged into one, or something that was not a wildfire at all. If you know this fire first-hand (you live nearby, saw it, fought it or reported on it), tell us what really happened and we will check it.

Report an error
What do you think is wrong?

We will only use your email to reply about this report. Privacy.

How we know this
  • Perimeter: GWIS (Copernicus), rebuilt from heat detections rather than mapped on imagery; 4 polygons grouped in this page.
  • Dates from the perimeter: the VIIRS detections inside it did not change them. 1,465 Suomi-NPP VIIRS detections on those dates.
  • We have not matched this page with any official record.
  • Weather: ECMWF IFS model, provisional until the ERA5 reanalysis arrives.
  • Built-up area and population come from the JRC Global Human Settlement Layer (epoch 2025, 100 m cells), summed inside the perimeter: an estimate of what was there, not a damage count.

How we build fire pages: methodology

Where this data comes from

The perimeter comes from the Copernicus Global Wildfire Information System (GWIS), which rebuilds it from MODIS and VIIRS heat detections and publishes it under CC BY 4.0. It is not measured on imagery as in Europe, so it is an estimate. Heat detections come from the VIIRS sensors aboard Suomi-NPP and NOAA-20, distributed by NASA FIRMS at 375 m resolution. Municipal boundaries come from geoBoundaries ADM2 (Creative Commons Attribution 3.0 Intergovernmental Organisations (CC BY 3.0 IGO)). The area per municipality is computed by WorldFires by crossing the perimeter with those boundaries, so it may differ from each country’s official figure.