Skip to content
worldfires
PG · Papua New Guinea · –

South Fly District fire, 27 September 2026 South Fly District

Out · last detection 11 Nov 2026, 15:58 UTC

The fire started on 27 September 2026 in South Fly District, Papua New Guinea, and satellites saw it burning for 46 days. Copernicus’s global GWIS system rebuilt a burnt perimeter of 14,648 hectares from heat detections, spread across a single municipality.

This page is probably a fire complex, not a single fire. GWIS merges into one perimeter the fires that touch over weeks, which in large burning seasons can join dozens of separate fires. The total area is reliable; the origin and dates refer to the whole complex.

Other fire pages in the same area and on the same dates:

Number 18 in Papua New Guinea in 2026, of 198.

GWIS near-real-time perimeter, from the layer that changed in October 2025: this fire is not compared with fires from earlier years, because since then the GWIS layer gives more and larger perimeters.

Burnt area
14,648ha
GWIS perimeter (Copernicus)
Duration
46days
27 Sept 2026 – 11 Nov 2026
Municipalities hit
1
districts
Started on
27 Sept
2026
Heat detections
574
in a single hotspot: 144 MW
Danger at start
32
High · FWI index
Average daily power
110MW
detected power per day, on average

Where it burned

HOTSPOTS BY DAY 27 Sept11 Nov
11 Nov 2026

How it evolved, day by day

27 Sept 2026 · 236 MW · 17 28 Sept 2026 · 73 MW · 17 29 Sept 2026 · 70 MW · 8 30 Sept 2026 · 28 MW · 6 1 Oct 2026 · 83 MW · 11 2 Oct 2026 · 102 MW · 14 3 Oct 2026 · 3 MW · 2 4 Oct 2026 · 30 MW · 6 6 Oct 2026 · 4 MW · 4 7 Oct 2026 · 35 MW · 9 8 Oct 2026 · 148 MW · 33 9 Oct 2026 · 60 MW · 12 10 Oct 2026 · 351 MW · 36 11 Oct 2026 · 177 MW · 30 12 Oct 2026 · 105 MW · 18 14 Oct 2026 · 187 MW · 19 15 Oct 2026 · 0 MW · 0 16 Oct 2026 · 7 MW · 5 17 Oct 2026 · 246 MW · 80 18 Oct 2026 · 279 MW · 43 19 Oct 2026 · 714 MW · 80 20 Oct 2026 · 0 MW · 0 21 Oct 2026 · 23 MW · 8 22 Oct 2026 · 7 MW · 5 23 Oct 2026 · 7 MW · 5 24 Oct 2026 · 6 MW · 4 25 Oct 2026 · 0 MW · 0 26 Oct 2026 · 0 MW · 0 27 Oct 2026 · 3 MW · 3 28 Oct 2026 · 18 MW · 7 29 Oct 2026 · 33 MW · 1 30 Oct 2026 · 0 MW · 0 31 Oct 2026 · 48 MW · 7 1 Nov 2026 · 0 MW · 0 2 Nov 2026 · 40 MW · 5 3 Nov 2026 · 0 MW · 0 4 Nov 2026 · 243 MW · 21 5 Nov 2026 · 309 MW · 36 7 Nov 2026 · 1 MW · 1 8 Nov 2026 · 0 MW · 0 9 Nov 2026 · 1 MW · 1 10 Nov 2026 · 78 MW · 5 11 Nov 2026 · 76 MW · 15
27 Sept 7 Oct 19 Oct 26 Oct 4 Nov

Fire radiative power detected each day, in megawatts, and number of hotspots. The magenta bar marks the peak day.

Fire front film How it spread from one satellite pass to the next (117 passes) and with what wind. Watch the film

The weather it burned in

38°high
42km/h · peak gust
20%lowest humidity

It had gone one day without rain (1 mm or more) when it started. Rain came after the fire: 5.2 mm on 12 Nov.

This area had burned before

No earlier perimeters overlap this fire since 2016, when the satellite record begins.

How big is it?

10 km
It burned the equivalent of 9.3% of the area of London (146 km² against 1,583 km²).

London boundary: geoBoundaries · Office for National Statistics (Open Government Licence v3.0).

This compares size, not location: both shapes are at the same scale, north up, centred on each other.

What happened to each town

  1. South Fly District where it started
    15,038 ha reached on 27 Sept
    0.5 %

Burnt area inside each municipality, from crossing the GWIS perimeter with administrative boundaries. The distance runs from the point marking the centre of each area to the nearest fire: staying a kilometre away does not mean it reached the houses.

People and buildings inside the perimeter

GHSL 2025
Built-up area0.10 ha
Residents≈ 50

Inside the perimeter there were about 0.10 hectares of built-up land and about 50 residents (GHSL 2025, satellite-based estimate).

This is an estimate on 100 m cells, made from satellite imagery and census data: it does not mean that homes burned or that anyone was harmed. The perimeter also contains land that never burned. The GHSL 2025 epoch is a projection made from 2020 and earlier data.

Source: Global Human Settlement Layer (GHS-BUILT-S and GHS-POP R2023A), European Commission Joint Research Centre (JRC), © European Union, CC BY 4.0. Sum inside the perimeter computed by WorldFires. human-settlement.emergency.copernicus.eu

The weather day by day

ECMWF ERA5 reanalysis at the fire location, the standard reference for past weather, and the Canadian Fire Weather Index (the same system Copernicus uses), computed by WorldFires from that data. Days after the fire run until the first rain.

Open-Meteo.com (CC BY 4.0) · forecast models, provisional until the ERA5 reanalysis arrives

Day High Min. humidity Peak gust Rain Danger (FWI)
27 Sept 34.3 °C 34 % 40 km/h 0.0 mm High 32
28 Sept 34.0 °C 35 % 40 km/h 0.4 mm High 31
29 Sept 34.6 °C 34 % 36 km/h 0.3 mm High 30
30 Sept 34.5 °C 38 % 39 km/h 0.9 mm High 32
1 Oct 32.7 °C 48 % 42 km/h 1.9 mm High 23
2 Oct 33.4 °C 43 % 39 km/h 0.6 mm High 22
3 Oct 32.4 °C 40 % 38 km/h 0.0 mm High 27
4 Oct 34.6 °C 33 % 40 km/h 0.0 mm High 31
5 Oct 36.7 °C 31 % 38 km/h 0.0 mm High 30
6 Oct 36.0 °C 30 % 41 km/h 0.0 mm High 32
7 Oct 36.4 °C 29 % 31 km/h 0.0 mm High 31
8 Oct 36.8 °C 21 % 32 km/h 0.0 mm High 32
9 Oct 36.2 °C 26 % 29 km/h 0.0 mm High 31
10 Oct 36.2 °C 25 % 31 km/h 0.0 mm High 33
11 Oct 36.2 °C 25 % 36 km/h 0.0 mm Very high 39
12 Oct 36.1 °C 30 % 39 km/h 0.0 mm Very high 38
13 Oct 37.1 °C 28 % 41 km/h 0.0 mm High 32
14 Oct 37.3 °C 27 % 31 km/h 0.2 mm High 34
15 Oct 36.6 °C 31 % 37 km/h 0.1 mm High 37
16 Oct 37.0 °C 26 % 40 km/h 0.0 mm Very high 39
17 Oct 36.0 °C 25 % 36 km/h 0.0 mm Very high 40
18 Oct 36.5 °C 28 % 37 km/h 0.0 mm High 37
19 Oct 36.5 °C 26 % 37 km/h 0.1 mm Very high 38
20 Oct 36.5 °C 29 % 36 km/h 0.0 mm Very high 42
21 Oct 37.0 °C 30 % 38 km/h 0.1 mm Very high 42
22 Oct 36.9 °C 31 % 42 km/h 0.1 mm High 37
23 Oct 37.3 °C 34 % 37 km/h 0.7 mm High 32
24 Oct 37.3 °C 35 % 36 km/h 0.2 mm High 32
25 Oct 37.6 °C 33 % 42 km/h 0.2 mm High 34
26 Oct 38.3 °C 29 % 26 km/h 0.8 mm High 33
27 Oct 37.8 °C 28 % 38 km/h 0.3 mm High 29
28 Oct 37.3 °C 29 % 33 km/h 0.2 mm High 30
29 Oct 37.5 °C 35 % 33 km/h 1.3 mm High 32
30 Oct 37.8 °C 29 % 40 km/h 0.0 mm High 34
31 Oct 37.1 °C 37 % 29 km/h 3.8 mm High 34
1 Nov 36.7 °C 38 % 28 km/h 3.7 mm Moderate 13
2 Nov 34.8 °C 54 % 40 km/h 5.4 mm Very low 5
3 Nov 36.7 °C 36 % 24 km/h 1.2 mm Low 7
4 Nov 37.6 °C 28 % 29 km/h 0.1 mm Moderate 21
5 Nov 38.5 °C 20 % 38 km/h 0.1 mm High 24
6 Nov 38.1 °C 25 % 39 km/h 0.1 mm High 26
7 Nov 37.2 °C 32 % 26 km/h 0.4 mm High 28
8 Nov 38.3 °C 30 % 24 km/h 4.0 mm High 27
9 Nov 34.8 °C 42 % 19 km/h 3.1 mm Very low 2
10 Nov 35.3 °C 49 % 24 km/h 5.5 mm Low 8
11 Nov 36.0 °C 44 % 38 km/h 1.5 mm Low 11
12 Nov after 37.4 °C 41 % 41 km/h 5.2 mm Moderate 18

Before and after, from space

Drag the line to compare the same ground before the fire and after it.

Before · 20 Sept 2026
After · 18 Nov 2026

If the day is cloudy, change the date: each satellite passes once a day. In false colour the burnt ground looks brown or red.

The smoke

CAMS · Copernicus

On 8 October 2026 the air beside the fire reached 208 µg/m³ of PM2.5. That day averaged 68: 4.6 times the WHO daily guideline (15).

PM2.5 peak208 µg/m³
Days over the guideline36 days
PM10213 µg/m³
Optical depth2.02
25 Sept6 Oct17 Oct28 Oct8 Nov
Good Fair Moderate Poor Very poor Extremely poor

Particles from the Copernicus CAMS model at the centre of the perimeter; these are not measurements in each town. The pale bar is the worst hour, the solid one the daily average.

Open-Meteo.com (CC BY 4.0) · Copernicus Atmosphere Monitoring Service (CAMS)

Detections table · 574Every satellite heat detection, one by one, with time, satellite, power and coordinates.
⬇ Download CSV Times in UTC. Each detection is a 375 m pixel: a large fire yields hundreds per pass.
Date and timeSatelliteFRP (MW)LatLon

Other fires nearby

All fires in Papua New Guinea

Frequently asked questions

How long did the South Fly District fire last?
According to the heat detections seen by satellite inside the perimeter, it burned from 27 September 2026 to 11 November 2026 (46 days). The perimeter dates it from 1 October 2026 to 11 November 2026.
How much area did it burn?
The perimeter GWIS (Copernicus) rebuilt from heat detections is 14,648 hectares (146.5 km²). It is an estimate: official national figures may differ.
Which municipalities burned?
The fire only entered South Fly District (15,038 ha, 0.5 %).
Is the South Fly District fire still active?
No fire detections since 11 Nov 2026, 15:58 UTC. A lack of detections is not an official extinction.
What was the weather like?
During the fire the temperature reached 38.5 °C, humidity dropped to 20 % and gusts hit 42 km/h. The fire danger index (FWI) reached 42, class Very high.
Where does this data come from?
From the GWIS (Copernicus) burnt perimeter, NASA FIRMS VIIRS hotspots and the administrative boundaries of Papua New Guinea (geoBoundaries). It is not an official report.

Where to verify it

A satellite detection is not an official report. Final figures and the fire’s status are published by each country’s emergency service.

Satellite cross-check

History of this page · 4 Changes in area, dates, name, official record or merged pages, compared every night since 5 November 2026.
  1. Area: 4,748 → 14,648 ha.
  2. Last day with fire: 22 October 2026 → 11 November 2026.
  3. The page “South Fly District, 4 October 2026” has been merged into this one: it was the same fire.
  4. Page published (4,748 ha).

RSS Changes to this page With cross-checks and a citable version

Does something look wrong on this page?

This page is built from satellite data and official records, and it sometimes gets things wrong: the wrong dates, the wrong town, two fires merged into one, or something that was not a wildfire at all. If you know this fire first-hand (you live nearby, saw it, fought it or reported on it), tell us what really happened and we will check it.

Report an error
What do you think is wrong?

We will only use your email to reply about this report. Privacy.

How we know this
  • Perimeter: GWIS (Copernicus), rebuilt from heat detections rather than mapped on imagery; 4 polygons grouped in this page.
  • Dates adjusted with the VIIRS detections inside the perimeter, which said 1 October 2026 to 11 November 2026. 574 Suomi-NPP VIIRS detections on those dates.
  • We have not matched this page with any official record.
  • Weather: ECMWF IFS model, provisional until the ERA5 reanalysis arrives.
  • Built-up area and population come from the JRC Global Human Settlement Layer (epoch 2025, 100 m cells), summed inside the perimeter: an estimate of what was there, not a damage count.

How we build fire pages: methodology

Where this data comes from

The perimeter comes from the Copernicus Global Wildfire Information System (GWIS), which rebuilds it from MODIS and VIIRS heat detections and publishes it under CC BY 4.0. It is not measured on imagery as in Europe, so it is an estimate. Heat detections come from the VIIRS sensors aboard Suomi-NPP and NOAA-20, distributed by NASA FIRMS at 375 m resolution. Municipal boundaries come from geoBoundaries ADM2 (Creative Commons Attribution 3.0 Intergovernmental Organisations (CC BY 3.0 IGO)). The area per municipality is computed by WorldFires by crossing the perimeter with those boundaries, so it may differ from each country’s official figure.