Skip to content
worldfires
MX · Mexico · –

Mezquital fire, 11 May 2016 Mezquital

Out · last detection 28 May 2016, 20:48 UTC

The fire started on 11 May 2016 in Mezquital, Mexico, and satellites saw it burning for 18 days. Copernicus’s global GWIS system rebuilt a burnt perimeter of 1,677 hectares from heat detections, spread across a single municipality.

It is the 205th largest in Durango since 2016 (of 238 with a page). Number 165 in Mexico in 2016, of 204.

Burnt area
1,677ha
GWIS perimeter (Copernicus)
Duration
18days
11 May 2016 – 28 May 2016
Municipalities hit
1
municipalities
Started on
11 May
2016
Heat detections
85
in a single hotspot: 34 MW
Danger at start
32
High · FWI index
Average daily power
45MW
detected power per day, on average

Where it burned

HOTSPOTS BY DAY 11 May28 May
28 May 2016

How it evolved, day by day

12 May 2016 · 3 MW · 1 14 May 2016 · 65 MW · 5 16 May 2016 · 3 MW · 3 17 May 2016 · 7 MW · 2 18 May 2016 · 126 MW · 16 19 May 2016 · 104 MW · 24 20 May 2016 · 162 MW · 19 21 May 2016 · 32 MW · 9 22 May 2016 · 10 MW · 1 24 May 2016 · 2 MW · 1 26 May 2016 · 7 MW · 1 28 May 2016 · 21 MW · 3
12 May 17 May 20 May 24 May

Fire radiative power detected each day, in megawatts, and number of hotspots. The magenta bar marks the peak day.

The weather it burned in

32°high
60km/h · peak gust
20%lowest humidity

It had gone one day without rain (1 mm or more) when it started. Rain came after the fire: 1.2 mm on 1 Jun.

This area had burned before

No earlier perimeters overlap this fire since 2016, when the satellite record begins.

How big is it?

10 km
It burned the equivalent of 1.1% of the area of London (17 km² against 1,583 km²).

London boundary: geoBoundaries · Office for National Statistics (Open Government Licence v3.0).

This compares size, not location: both shapes are at the same scale, north up, centred on each other.

What happened to each town

  1. Mezquital where it started
    1,683 ha reached on 12 May
    0.2 %

Burnt area inside each municipality, from crossing the GWIS perimeter with administrative boundaries. The distance runs from the point marking the centre of each area to the nearest fire: staying a kilometre away does not mean it reached the houses.

People and buildings inside the perimeter

GHSL 2015
Built-up area< 0.1 ha
Residents< 20

Inside the perimeter there was no noticeable built-up land and almost nobody lived there (GHSL 2015, satellite-based estimate).

This is an estimate on 100 m cells, made from satellite imagery and census data: it does not mean that homes burned or that anyone was harmed. The perimeter also contains land that never burned.

Source: Global Human Settlement Layer (GHS-BUILT-S and GHS-POP R2023A), European Commission Joint Research Centre (JRC), © European Union, CC BY 4.0. Sum inside the perimeter computed by WorldFires. human-settlement.emergency.copernicus.eu

The weather day by day

ECMWF ERA5 reanalysis at the fire location, the standard reference for past weather, and the Canadian Fire Weather Index (the same system Copernicus uses), computed by WorldFires from that data. Days after the fire run until the first rain.

Open-Meteo.com (CC BY 4.0) · Copernicus Climate Change Service (ERA5)

Day High Min. humidity Peak gust Rain Danger (FWI)
11 May 29.1 °C 30 % 45 km/h 0.7 mm High 32
12 May 30.1 °C 29 % 44 km/h 0.3 mm High 34
13 May 29.9 °C 33 % 36 km/h 4.9 mm High 32
14 May 27.4 °C 35 % 39 km/h 0.6 mm Very low 4
15 May 25.2 °C 48 % 43 km/h 5.0 mm Moderate 15
16 May 25.8 °C 40 % 57 km/h 0.8 mm Low 6
17 May 27.2 °C 28 % 60 km/h 0.0 mm High 29
18 May 26.4 °C 27 % 56 km/h 0.0 mm High 35
19 May 26.7 °C 28 % 57 km/h 0.0 mm High 36
20 May 28.7 °C 24 % 52 km/h 0.0 mm High 36
21 May 29.4 °C 20 % 53 km/h 0.0 mm Very high 41
22 May 29.5 °C 21 % 47 km/h 0.0 mm Very high 42
23 May 30.3 °C 26 % 58 km/h 0.0 mm Very high 41
24 May 31.0 °C 23 % 49 km/h 0.0 mm Very high 40
25 May 31.5 °C 26 % 50 km/h 0.1 mm Very high 40
26 May 29.7 °C 26 % 60 km/h 0.7 mm Very high 43
27 May 28.8 °C 26 % 56 km/h 0.1 mm Very high 41
28 May 29.0 °C 26 % 48 km/h 0.0 mm Very high 38
29 May after 30.8 °C 20 % 55 km/h 0.0 mm Very high 40
30 May after 31.5 °C 21 % 54 km/h 0.2 mm Very high 43
31 May after 29.4 °C 29 % 53 km/h 0.6 mm Very high 46
1 Jun after 28.2 °C 36 % 55 km/h 1.2 mm High 37

Its twins: fires that started in the same weather

It started with an FWI of 32.1, a minimum humidity of 30% and 1 day without rain. Fires in the area that started in weather like this since 2016: 32.

FWI at the start 32.1
Minimum humidity 30 %
Days without rain 1
this fire chosen twins rest of the area
Almost identicalSimilar

Outlines of the closest twins

Rosario fire, May 2018
3,313 ha 17 days FWI 29.5 Min. humidity 30 % 65 km away, in 2018

First rain (1 mm or more) after it ended: 1.3 mm on 31 May.

What happened to them

12 days
median duration
2,023 ha
median area
100 %
went past 1,000 ha
2.3 mm
rain at the end (median; 30 of 32 had it)

It burned an area similar to its twins (1,677 ha against a median of 2,023 ha) and lasted 18 days, against 12 days.

In 2 of 32, not even 1 mm fell in the ten days after the end: they went out without rain. In the rest, the first rainy day brought a median of 2.3 mm.

This is a bank of analogues: it shows what usually happens, not what will happen. With fewer than 15 twins we give no figures. How we calculate it

How it ended

1.2 mmfirst rain
1 Jun4 days after it ended
60km/h · max. gust

It was considered over on 28 May, and on 1 Jun 1.2 mm fell. We do not know whether the rain or the firefighters put it out. Twins with rain when they ended: 30 of 32, with a median of 2.3 mm.

Weather on this page: Open-Meteo.com (CC BY 4.0) · Copernicus Climate Change Service (ERA5)

How a twin is chosen

  • Same area: fires that have already ended, less than 250 km from this one, since 2016.
  • Same start: we compare the FWI on the first day, the minimum humidity that day and the run of days without rain before it. The slider sets how much they may differ.
  • Only pages with final weather data (ERA5 reanalysis) calculated in the same way as this fire’s; agricultural and grass burns and pages with data under review are left out.
  • Fires burning at the same time as this one (a week before or after) are left out: they share the same spell of weather and do not count as a precedent.
  • They are sorted by similarity, and the outlines of the first five are drawn.

How we calculate it

Before and after, from space

Drag the line to compare the same ground before the fire and after it.

Before · 4 May 2016
After · 4 Jun 2016

If the day is cloudy, change the date: each satellite passes once a day. In false colour the burnt ground looks brown or red.

Detections table · 85Every satellite heat detection, one by one, with time, satellite, power and coordinates.
⬇ Download CSV Times in UTC. Each detection is a 375 m pixel: a large fire yields hundreds per pass.
Date and timeSatelliteFRP (MW)LatLon

Other fires nearby

All fires in Mexico

Frequently asked questions

How long did the Mezquital fire last?
According to the heat detections seen by satellite inside the perimeter, it burned from 11 May 2016 to 28 May 2016 (18 days). The perimeter dates it from 16 May 2016 to 21 May 2016.
How much area did it burn?
The perimeter GWIS (Copernicus) rebuilt from heat detections is 1,677 hectares (16.8 km²). It is an estimate: official national figures may differ.
Which municipalities burned?
The fire only entered Mezquital (1,683 ha, 0.2 %).
What was the weather like?
During the fire the temperature reached 31.5 °C, humidity dropped to 20 % and gusts hit 60 km/h. The fire danger index (FWI) reached 43, class Very high.
Where does this data come from?
From the GWIS (Copernicus) burnt perimeter, NASA FIRMS VIIRS hotspots and the administrative boundaries of Mexico (geoBoundaries). It is not an official report.
How did the fires that started in similar weather in this area end?
Fires less than 250 km away that started since 2016 with a similar FWI, humidity and dry spell: 32. Their median duration was 12 days and their median area 2,023 ha; 100 % went past 1,000 ha. In 2 of 32, not even 1 mm fell in the ten days after the end: they went out without rain. In the rest, the first rainy day brought a median of 2.3 mm.

Where to verify it

A satellite detection is not an official report. Final figures and the fire’s status are published by each country’s emergency service.

Emergency number: 911 · Emergency number and official warnings

Satellite cross-check

History of this page · 2 Changes in area, dates, name, official record or merged pages, compared every night since 24 October 2026.
  1. Last day with fire: 21 May 2016 → 28 May 2016.
  2. Start date: 16 May 2016 → 11 May 2016.

RSS Changes to this page With cross-checks and a citable version

Does something look wrong on this page?

This page is built from satellite data and official records, and it sometimes gets things wrong: the wrong dates, the wrong town, two fires merged into one, or something that was not a wildfire at all. If you know this fire first-hand (you live nearby, saw it, fought it or reported on it), tell us what really happened and we will check it.

Report an error
What do you think is wrong?

We will only use your email to reply about this report. Privacy. This is not an emergency service: if there is a fire now, call 911.

How we know this
  • Perimeter: GWIS (Copernicus), rebuilt from heat detections rather than mapped on imagery.
  • Dates adjusted with the VIIRS detections inside the perimeter, which said 16 May 2016 to 21 May 2016. 85 Suomi-NPP VIIRS detections on those dates.
  • We have not matched this page with any official record.
  • Weather: Copernicus ERA5 reanalysis at the fire location, in cells of about 25 km.
  • Built-up area and population come from the JRC Global Human Settlement Layer (epoch 2015, 100 m cells), summed inside the perimeter: an estimate of what was there, not a damage count.

How we build fire pages: methodology

Where this data comes from

The perimeter comes from the Copernicus Global Wildfire Information System (GWIS), which rebuilds it from MODIS and VIIRS heat detections and publishes it under CC BY 4.0. It is not measured on imagery as in Europe, so it is an estimate. Heat detections come from the VIIRS sensors aboard Suomi-NPP and NOAA-20, distributed by NASA FIRMS at 375 m resolution. Municipal boundaries come from geoBoundaries ADM2 (Creative Commons Attribution 4.0 (CC BY 4.0)). The area per municipality is computed by WorldFires by crossing the perimeter with those boundaries, so it may differ from each country’s official figure.