Skip to content
worldfires
ID · Indonesia · –

Merauke fire, 15 September 2026 Boven Digoel, Merauke

Out · last detection

The fire started on in Merauke, Indonesia, and satellites saw it burning for 53 days. Copernicus’s global GWIS system rebuilt a burnt perimeter of 93,720 hectares from heat detections, spread across 2 municipalities.

This page is probably a fire complex, not a single fire. GWIS merges into one perimeter the fires that touch over weeks, which in large burning seasons can join dozens of separate fires. The total area is reliable; the origin and dates refer to the whole complex.

Other fire pages in the same area and on the same dates:

Number 5 in Indonesia in 2026, of 995.

GWIS near-real-time perimeter, from the layer that changed in October 2025: this fire is not compared with fires from earlier years, because since then the GWIS layer gives more and larger perimeters.

Burnt area
93,720ha
GWIS perimeter (Copernicus)
Duration
53days
15 Sept 2026 – 6 Nov 2026
Municipalities hit
2
regencies
Started on
15 Sept
2026
Heat detections
5,215
in a single hotspot: 304 MW
Danger at start
28
High · FWI index
Average daily power
607MW
detected power per day, on average

Where it burned

HOTSPOTS BY DAY 15 Sept6 Nov
6 Nov 2026

How it evolved, day by day

15 Sept 2026 · 10 MW · 8 17 Sept 2026 · 29 MW · 5 18 Sept 2026 · 303 MW · 39 19 Sept 2026 · 2 MW · 1 21 Sept 2026 · 288 MW · 25 22 Sept 2026 · 23 MW · 4 23 Sept 2026 · 19 MW · 1 24 Sept 2026 · 189 MW · 21 25 Sept 2026 · 447 MW · 131 26 Sept 2026 · 958 MW · 119 27 Sept 2026 · 610 MW · 61 28 Sept 2026 · 1,652 MW · 232 29 Sept 2026 · 1,977 MW · 116 30 Sept 2026 · 1,450 MW · 146 1 Oct 2026 · 112 MW · 49 2 Oct 2026 · 164 MW · 23 3 Oct 2026 · 55 MW · 32 4 Oct 2026 · 265 MW · 63 5 Oct 2026 · 945 MW · 279 6 Oct 2026 · 4,475 MW · 497 7 Oct 2026 · 3,609 MW · 538 8 Oct 2026 · 1,968 MW · 286 9 Oct 2026 · 21 MW · 6 10 Oct 2026 · 646 MW · 153 11 Oct 2026 · 3,685 MW · 794 12 Oct 2026 · 242 MW · 47 13 Oct 2026 · 28 MW · 9 14 Oct 2026 · 0 MW · 0 15 Oct 2026 · 36 MW · 11 16 Oct 2026 · 916 MW · 395 17 Oct 2026 · 1,575 MW · 568 18 Oct 2026 · 353 MW · 111 19 Oct 2026 · 635 MW · 117 20 Oct 2026 · 18 MW · 18 21 Oct 2026 · 121 MW · 21 22 Oct 2026 · 283 MW · 194 23 Oct 2026 · 41 MW · 7 24 Oct 2026 · 32 MW · 5 25 Oct 2026 · 0 MW · 0 26 Oct 2026 · 20 MW · 3 27 Oct 2026 · 13 MW · 7 28 Oct 2026 · 39 MW · 20 29 Oct 2026 · 15 MW · 4 30 Oct 2026 · 1 MW · 1 31 Oct 2026 · 0 MW · 0 1 Nov 2026 · 1 MW · 1 2 Nov 2026 · 3 MW · 2 3 Nov 2026 · 19 MW · 2 4 Nov 2026 · 119 MW · 22 5 Nov 2026 · 135 MW · 21 6 Nov 2026 · 0 MW · 0
15 Sept 28 Sept 6 Oct 20 Oct 31 Oct

Fire radiative power detected each day, in megawatts, and number of hotspots. The magenta bar marks the peak day.

Fire front film How it spread from one satellite pass to the next (193 passes) and with what wind. Watch the film

The weather it burned in

36°high
49km/h · peak gust
31%lowest humidity

It had gone 16 days without rain (1 mm or more) when it started. Rain came after the fire: 6.0 mm on 8 Nov.

This area had burned before

No earlier perimeters overlap this fire since 2016, when the satellite record begins.

How big is it?

10 km
It burned the equivalent of 59% of the area of London (937 km² against 1,583 km²).

London boundary: geoBoundaries · Office for National Statistics (Open Government Licence v3.0).

This compares size, not location: both shapes are at the same scale, north up, centred on each other.

What happened to each town

  1. 64,695 ha reached on 15 Sept
    2.7 %
  2. Merauke where it started
    30,125 ha reached on 15 Sept
    0.7 %

Burnt area inside each municipality, from crossing the GWIS perimeter with administrative boundaries. The distance runs from the point marking the centre of each area to the nearest fire: staying a kilometre away does not mean it reached the houses.

People and buildings inside the perimeter

GHSL 2025
Built-up area3.5 ha
Residents≈ 2,200

Inside the perimeter there were about 3.5 hectares of built-up land and about 2,200 residents (GHSL 2025, satellite-based estimate).

This is an estimate on 100 m cells, made from satellite imagery and census data: it does not mean that homes burned or that anyone was harmed. The perimeter also contains land that never burned. The GHSL 2025 epoch is a projection made from 2020 and earlier data.

Source: Global Human Settlement Layer (GHS-BUILT-S and GHS-POP R2023A), European Commission Joint Research Centre (JRC), © European Union, CC BY 4.0. Sum inside the perimeter computed by WorldFires. human-settlement.emergency.copernicus.eu

The weather day by day

ECMWF ERA5 reanalysis at the fire location, the standard reference for past weather, and the Canadian Fire Weather Index (the same system Copernicus uses), computed by WorldFires from that data. Days after the fire run until the first rain.

Open-Meteo.com (CC BY 4.0) · Copernicus Climate Change Service (ERA5)

Day High Min. humidity Peak gust Rain Danger (FWI)
15 Sept 29.6 °C 54 % 41 km/h 0.0 mm High 28
16 Sept 29.6 °C 53 % 37 km/h 0.2 mm High 26
17 Sept 31.8 °C 46 % 41 km/h 0.0 mm High 27
18 Sept 30.6 °C 53 % 49 km/h 0.0 mm High 32
19 Sept 29.2 °C 56 % 47 km/h 0.0 mm High 30
20 Sept 29.3 °C 58 % 41 km/h 0.0 mm High 26
21 Sept 31.0 °C 51 % 35 km/h 0.0 mm High 26
22 Sept 31.1 °C 50 % 34 km/h 0.0 mm High 25
23 Sept 30.4 °C 56 % 38 km/h 0.0 mm High 26
24 Sept 31.3 °C 52 % 36 km/h 0.0 mm High 26
25 Sept 32.0 °C 50 % 37 km/h 0.0 mm High 25
26 Sept 32.2 °C 46 % 43 km/h 0.0 mm High 26
27 Sept 32.4 °C 44 % 41 km/h 0.0 mm High 28
28 Sept 33.5 °C 40 % 43 km/h 0.0 mm High 32
29 Sept 33.9 °C 39 % 40 km/h 0.0 mm High 30
30 Sept 34.0 °C 35 % 36 km/h 0.0 mm High 31
1 Oct 32.2 °C 46 % 41 km/h 0.0 mm High 37
2 Oct 33.0 °C 41 % 44 km/h 0.1 mm High 34
3 Oct 30.9 °C 51 % 38 km/h 0.0 mm High 29
4 Oct 32.1 °C 50 % 39 km/h 0.0 mm High 26
5 Oct 33.8 °C 44 % 32 km/h 0.0 mm High 26
6 Oct 35.0 °C 33 % 33 km/h 0.0 mm High 35
7 Oct 34.6 °C 34 % 26 km/h 0.0 mm High 31
8 Oct 33.0 °C 45 % 26 km/h 0.0 mm High 26
9 Oct 32.2 °C 48 % 24 km/h 0.0 mm High 24
10 Oct 34.4 °C 38 % 30 km/h 0.0 mm High 29
11 Oct 35.6 °C 31 % 33 km/h 0.0 mm High 31
12 Oct 34.7 °C 39 % 35 km/h 0.0 mm High 30
13 Oct 33.0 °C 46 % 32 km/h 0.0 mm High 22
14 Oct 32.7 °C 45 % 28 km/h 0.0 mm High 24
15 Oct 31.8 °C 54 % 26 km/h 0.4 mm High 22
16 Oct 34.3 °C 40 % 33 km/h 0.0 mm High 33
17 Oct 34.6 °C 40 % 38 km/h 0.0 mm High 29
18 Oct 33.2 °C 45 % 32 km/h 0.0 mm High 27
19 Oct 33.0 °C 48 % 33 km/h 0.0 mm High 28
20 Oct 34.2 °C 42 % 29 km/h 0.0 mm High 28
21 Oct 33.9 °C 48 % 32 km/h 0.0 mm High 27
22 Oct 34.0 °C 52 % 28 km/h 0.0 mm High 25
23 Oct 34.0 °C 47 % 22 km/h 0.0 mm High 24
24 Oct 34.8 °C 48 % 23 km/h 0.0 mm High 25
25 Oct 35.0 °C 47 % 20 km/h 0.6 mm High 25
26 Oct 33.8 °C 54 % 24 km/h 1.6 mm Moderate 13
27 Oct 32.7 °C 56 % 19 km/h 0.1 mm Moderate 15
28 Oct 33.1 °C 54 % 28 km/h 0.6 mm Moderate 17
29 Oct 34.8 °C 49 % 23 km/h 0.7 mm Moderate 18
30 Oct 34.1 °C 51 % 26 km/h 0.8 mm Moderate 16
31 Oct 35.8 °C 46 % 28 km/h 1.3 mm Moderate 15
1 Nov 33.4 °C 53 % 14 km/h 0.9 mm Moderate 14
2 Nov 33.4 °C 59 % 21 km/h 3.0 mm Low 6
3 Nov 34.3 °C 53 % 17 km/h 1.2 mm Low 7
4 Nov 35.0 °C 44 % 21 km/h 0.4 mm Moderate 13
5 Nov 35.2 °C 46 % 22 km/h 0.4 mm Moderate 18
6 Nov 33.9 °C 53 % 25 km/h 1.7 mm Low 8
7 Nov after 33.2 °C 51 % 19 km/h 0.9 mm Low 11
8 Nov after 34.7 °C 54 % 26 km/h 6.0 mm Moderate 16

Before and after, from space

Drag the line to compare the same ground before the fire and after it.

Before · 8 Sept 2026
After · 13 Nov 2026

If the day is cloudy, change the date: each satellite passes once a day. In false colour the burnt ground looks brown or red.

The smoke

CAMS · Copernicus

On 2 October 2026 the air beside the fire reached 230 µg/m³ of PM2.5. That day averaged 65: 4.3 times the WHO daily guideline (15).

PM2.5 peak230 µg/m³
Days over the guideline10 days
PM10235 µg/m³
Optical depth1.82
16 Sept20 Sept24 Sept28 Sept2 Oct
Good Fair Moderate Poor Very poor Extremely poor

Particles from the Copernicus CAMS model at the centre of the perimeter; these are not measurements in each town. The pale bar is the worst hour, the solid one the daily average.

Open-Meteo.com (CC BY 4.0) · Copernicus Atmosphere Monitoring Service (CAMS)

Detections table · 5,215Every satellite heat detection, one by one, with time, satellite, power and coordinates.
⬇ Download CSV Times in UTC. Each detection is a 375 m pixel: a large fire yields hundreds per pass.
Date and timeSatelliteFRP (MW)LatLon

Other fires nearby

All fires in Indonesia

Frequently asked questions

How long did the Merauke fire last?
According to the heat detections seen by satellite inside the perimeter, it burned from 15 September 2026 to 6 November 2026 (53 days). The perimeter dates it from 21 September 2026 to 31 October 2026.
How much area did it burn?
The perimeter GWIS (Copernicus) rebuilt from heat detections is 93,720 hectares (937.2 km²). It is an estimate: official national figures may differ.
Which municipalities burned?
The fire entered 2 municipalities: Boven Digoel (64,695 ha, 2.7 %); Merauke (30,125 ha, 0.7 %).
Is the Merauke fire still active?
No fire detections since 6 Nov 2026, 04:48 UTC. A lack of detections is not an official extinction.
What was the weather like?
During the fire the temperature reached 35.8 °C, humidity dropped to 31 % and gusts hit 49 km/h. The fire danger index (FWI) reached 37, class High.
Where does this data come from?
From the GWIS (Copernicus) burnt perimeter, NASA FIRMS VIIRS hotspots and the administrative boundaries of Indonesia (geoBoundaries). It is not an official report.

Where to verify it

A satellite detection is not an official report. Final figures and the fire’s status are published by each country’s emergency service.

Emergency number: 112 · Emergency number and official warnings

Satellite cross-check

History of this page · 2 Changes in area, dates, name, official record or merged pages, compared every night since 24 October 2026.
  1. Last day with fire: 24 October 2026 → 6 November 2026.
  2. Area: 120,886 → 93,832 ha.

RSS Changes to this page With cross-checks and a citable version

Does something look wrong on this page?

This page is built from satellite data and official records, and it sometimes gets things wrong: the wrong dates, the wrong town, two fires merged into one, or something that was not a wildfire at all. If you know this fire first-hand (you live nearby, saw it, fought it or reported on it), tell us what really happened and we will check it.

Report an error
What do you think is wrong?

We will only use your email to reply about this report. Privacy. This is not an emergency service: if there is a fire now, call 112.

How we know this
  • Perimeter: GWIS (Copernicus), rebuilt from heat detections rather than mapped on imagery; 10 polygons grouped in this page.
  • Dates adjusted with the VIIRS detections inside the perimeter, which said 21 September 2026 to 31 October 2026. 5,215 Suomi-NPP VIIRS detections on those dates.
  • We have not matched this page with any official record.
  • Weather: Copernicus ERA5 reanalysis at the fire location, in cells of about 25 km.
  • Built-up area and population come from the JRC Global Human Settlement Layer (epoch 2025, 100 m cells), summed inside the perimeter: an estimate of what was there, not a damage count.

How we build fire pages: methodology

Where this data comes from

The perimeter comes from the Copernicus Global Wildfire Information System (GWIS), which rebuilds it from MODIS and VIIRS heat detections and publishes it under CC BY 4.0. It is not measured on imagery as in Europe, so it is an estimate. Heat detections come from the VIIRS sensors aboard Suomi-NPP and NOAA-20, distributed by NASA FIRMS at 375 m resolution. Municipal boundaries come from geoBoundaries ADM2 (Creative Commons Attribution 3.0 Intergovernmental Organisations (CC BY 3.0 IGO)). The area per municipality is computed by WorldFires by crossing the perimeter with those boundaries, so it may differ from each country’s official figure.