Skip to content
worldfires
ID · Indonesia · –

Boven Digoel fire, 15 September 2026 Boven Digoel

Out · last detection 28 Oct 2026, 16:18 UTC

The fire started on 15 September 2026 in Boven Digoel, Indonesia, and satellites saw it burning for 44 days. Copernicus’s global GWIS system rebuilt a burnt perimeter of 41,993 hectares from heat detections, spread across a single municipality.

Number 15 in Indonesia in 2026, of 995.

GWIS near-real-time perimeter, from the layer that changed in October 2025: this fire is not compared with fires from earlier years, because since then the GWIS layer gives more and larger perimeters.

Burnt area
41,993ha
GWIS perimeter (Copernicus)
Duration
44days
15 Sept 2026 – 28 Oct 2026
Municipalities hit
1
regencies
Started on
15 Sept
2026
Heat detections
2,061
in a single hotspot: 129 MW
Danger at start
26
High · FWI index
Average daily power
362MW
detected power per day, on average

Where it burned

HOTSPOTS BY DAY 15 Sept28 Oct
28 Oct 2026

How it evolved, day by day

15 Sept 2026 · 2 MW · 1 17 Sept 2026 · 24 MW · 3 18 Sept 2026 · 55 MW · 13 21 Sept 2026 · 31 MW · 5 23 Sept 2026 · 19 MW · 1 24 Sept 2026 · 173 MW · 20 25 Sept 2026 · 335 MW · 91 26 Sept 2026 · 416 MW · 67 27 Sept 2026 · 144 MW · 19 28 Sept 2026 · 835 MW · 124 29 Sept 2026 · 331 MW · 47 30 Sept 2026 · 195 MW · 57 1 Oct 2026 · 38 MW · 25 2 Oct 2026 · 0 MW · 0 3 Oct 2026 · 49 MW · 27 4 Oct 2026 · 113 MW · 37 5 Oct 2026 · 497 MW · 128 6 Oct 2026 · 2,273 MW · 205 7 Oct 2026 · 2,796 MW · 276 8 Oct 2026 · 951 MW · 148 9 Oct 2026 · 14 MW · 5 10 Oct 2026 · 256 MW · 63 11 Oct 2026 · 1,823 MW · 275 12 Oct 2026 · 154 MW · 29 13 Oct 2026 · 2 MW · 2 14 Oct 2026 · 0 MW · 0 15 Oct 2026 · 7 MW · 3 16 Oct 2026 · 144 MW · 75 17 Oct 2026 · 355 MW · 134 18 Oct 2026 · 103 MW · 36 19 Oct 2026 · 268 MW · 39 20 Oct 2026 · 17 MW · 16 21 Oct 2026 · 103 MW · 19 22 Oct 2026 · 92 MW · 58 23 Oct 2026 · 27 MW · 5 24 Oct 2026 · 32 MW · 4 25 Oct 2026 · 0 MW · 0 26 Oct 2026 · 0 MW · 0 28 Oct 2026 · 9 MW · 4
15 Sept 27 Sept 7 Oct 13 Oct 21 Oct

Fire radiative power detected each day, in megawatts, and number of hotspots. The magenta bar marks the peak day.

Fire front film How it spread from one satellite pass to the next (147 passes) and with what wind. Watch the film

The weather it burned in

36°high
48km/h · peak gust
32%lowest humidity

It had gone 17 days without rain (1 mm or more) when it started. Rain came after the fire: 2.5 mm on 30 Oct.

This area had burned before

No earlier perimeters overlap this fire since 2016, when the satellite record begins.

How big is it?

10 km
It burned the equivalent of 27% of the area of London (420 km² against 1,583 km²).

London boundary: geoBoundaries · Office for National Statistics (Open Government Licence v3.0).

This compares size, not location: both shapes are at the same scale, north up, centred on each other.

What happened to each town

  1. Boven Digoel where it started
    30,109 ha reached on 15 Sept
    1.3 %

Burnt area inside each municipality, from crossing the GWIS perimeter with administrative boundaries. The distance runs from the point marking the centre of each area to the nearest fire: staying a kilometre away does not mean it reached the houses.

People and buildings inside the perimeter

GHSL 2025
Built-up area4.9 ha
Residents≈ 1,600

Inside the perimeter there were about 4.9 hectares of built-up land and about 1,600 residents (GHSL 2025, satellite-based estimate).

This is an estimate on 100 m cells, made from satellite imagery and census data: it does not mean that homes burned or that anyone was harmed. The perimeter also contains land that never burned. The GHSL 2025 epoch is a projection made from 2020 and earlier data.

Source: Global Human Settlement Layer (GHS-BUILT-S and GHS-POP R2023A), European Commission Joint Research Centre (JRC), © European Union, CC BY 4.0. Sum inside the perimeter computed by WorldFires. human-settlement.emergency.copernicus.eu

The weather day by day

ECMWF ERA5 reanalysis at the fire location, the standard reference for past weather, and the Canadian Fire Weather Index (the same system Copernicus uses), computed by WorldFires from that data. Days after the fire run until the first rain.

Open-Meteo.com (CC BY 4.0) · Copernicus Climate Change Service (ERA5)

Day High Min. humidity Peak gust Rain Danger (FWI)
15 Sept 29.7 °C 56 % 41 km/h 0.0 mm High 26
16 Sept 29.5 °C 55 % 36 km/h 0.3 mm High 24
17 Sept 31.8 °C 47 % 38 km/h 0.0 mm High 25
18 Sept 30.8 °C 52 % 48 km/h 0.0 mm High 29
19 Sept 29.5 °C 55 % 47 km/h 0.0 mm High 28
20 Sept 29.3 °C 58 % 39 km/h 0.0 mm High 24
21 Sept 30.9 °C 52 % 32 km/h 0.0 mm High 24
22 Sept 31.2 °C 50 % 32 km/h 0.0 mm High 23
23 Sept 30.8 °C 55 % 37 km/h 0.0 mm High 25
24 Sept 31.7 °C 51 % 34 km/h 0.0 mm High 25
25 Sept 32.5 °C 48 % 36 km/h 0.0 mm High 25
26 Sept 32.7 °C 46 % 41 km/h 0.0 mm High 26
27 Sept 32.8 °C 43 % 39 km/h 0.0 mm High 27
28 Sept 33.4 °C 40 % 43 km/h 0.0 mm High 30
29 Sept 33.7 °C 41 % 36 km/h 0.0 mm High 29
30 Sept 34.2 °C 36 % 34 km/h 0.0 mm High 28
1 Oct 32.8 °C 43 % 40 km/h 0.0 mm High 35
2 Oct 33.1 °C 42 % 42 km/h 0.2 mm High 32
3 Oct 30.9 °C 53 % 37 km/h 0.0 mm High 27
4 Oct 32.4 °C 50 % 36 km/h 0.0 mm High 25
5 Oct 33.3 °C 49 % 28 km/h 0.0 mm High 25
6 Oct 35.3 °C 34 % 30 km/h 0.0 mm High 33
7 Oct 34.8 °C 35 % 24 km/h 0.0 mm High 31
8 Oct 32.6 °C 46 % 24 km/h 0.1 mm High 25
9 Oct 32.4 °C 49 % 22 km/h 0.0 mm High 24
10 Oct 34.4 °C 36 % 32 km/h 0.0 mm High 28
11 Oct 35.6 °C 32 % 32 km/h 0.0 mm High 27
12 Oct 34.6 °C 41 % 32 km/h 0.0 mm High 26
13 Oct 34.4 °C 39 % 31 km/h 0.0 mm High 25
14 Oct 32.2 °C 49 % 26 km/h 0.3 mm High 22
15 Oct 32.0 °C 52 % 26 km/h 0.6 mm Moderate 17
16 Oct 34.9 °C 39 % 32 km/h 0.0 mm High 31
17 Oct 34.5 °C 43 % 36 km/h 0.0 mm High 28
18 Oct 33.1 °C 48 % 29 km/h 0.0 mm High 26
19 Oct 32.9 °C 48 % 31 km/h 0.0 mm High 28
20 Oct 33.9 °C 46 % 28 km/h 0.0 mm High 27
21 Oct 33.6 °C 51 % 28 km/h 0.1 mm High 26
22 Oct 33.8 °C 51 % 28 km/h 0.0 mm High 23
23 Oct 34.0 °C 49 % 17 km/h 0.2 mm High 22
24 Oct 35.3 °C 43 % 20 km/h 0.3 mm High 24
25 Oct 35.5 °C 45 % 21 km/h 1.9 mm High 24
26 Oct 33.8 °C 54 % 26 km/h 3.0 mm Low 6
27 Oct 32.9 °C 56 % 18 km/h 0.4 mm Low 6
28 Oct 32.8 °C 55 % 24 km/h 0.6 mm Low 11
29 Oct after 34.7 °C 50 % 23 km/h 0.7 mm Moderate 18
30 Oct after 34.0 °C 54 % 24 km/h 2.5 mm Low 6

Before and after, from space

Drag the line to compare the same ground before the fire and after it.

Before · 8 Sept 2026
After · 4 Nov 2026

If the day is cloudy, change the date: each satellite passes once a day. In false colour the burnt ground looks brown or red.

The smoke

CAMS · Copernicus

On 7 October 2026 the air beside the fire reached 207 µg/m³ of PM2.5. That day averaged 93: 6.2 times the WHO daily guideline (15).

PM2.5 peak207 µg/m³
Days over the guideline13 days
PM10215 µg/m³
Optical depth2.23
15 Sept20 Sept25 Sept30 Sept5 Oct
Good Fair Moderate Poor Very poor Extremely poor

Particles from the Copernicus CAMS model at the centre of the perimeter; these are not measurements in each town. The pale bar is the worst hour, the solid one the daily average.

Open-Meteo.com (CC BY 4.0) · Copernicus Atmosphere Monitoring Service (CAMS)

Detections table · 2,061Every satellite heat detection, one by one, with time, satellite, power and coordinates.
⬇ Download CSV Times in UTC. Each detection is a 375 m pixel: a large fire yields hundreds per pass.
Date and timeSatelliteFRP (MW)LatLon

Other fires nearby

All fires in Indonesia

Frequently asked questions

How long did the Boven Digoel fire last?
According to the heat detections seen by satellite inside the perimeter, it burned from 15 September 2026 to 28 October 2026 (44 days). The perimeter dates it from 21 September 2026 to 22 October 2026.
How much area did it burn?
The perimeter GWIS (Copernicus) rebuilt from heat detections is 41,993 hectares (419.9 km²). It is an estimate: official national figures may differ.
Which municipalities burned?
The fire only entered Boven Digoel (30,109 ha, 1.3 %).
Is the Boven Digoel fire still active?
No fire detections since 28 Oct 2026, 16:18 UTC. A lack of detections is not an official extinction.
What was the weather like?
During the fire the temperature reached 35.6 °C, humidity dropped to 32 % and gusts hit 48 km/h. The fire danger index (FWI) reached 35, class High.
Where does this data come from?
From the GWIS (Copernicus) burnt perimeter, NASA FIRMS VIIRS hotspots and the administrative boundaries of Indonesia (geoBoundaries). It is not an official report.

Where to verify it

A satellite detection is not an official report. Final figures and the fire’s status are published by each country’s emergency service.

Emergency number: 112 · Emergency number and official warnings

Satellite cross-check

History of this page · 2 Changes in area, dates, name, official record or merged pages, compared every night since 24 October 2026.
  1. Area: 54,407 → 42,064 ha.
  2. Last day with fire: 24 October 2026 → 28 October 2026.

RSS Changes to this page With cross-checks and a citable version

Does something look wrong on this page?

This page is built from satellite data and official records, and it sometimes gets things wrong: the wrong dates, the wrong town, two fires merged into one, or something that was not a wildfire at all. If you know this fire first-hand (you live nearby, saw it, fought it or reported on it), tell us what really happened and we will check it.

Report an error
What do you think is wrong?

We will only use your email to reply about this report. Privacy. This is not an emergency service: if there is a fire now, call 112.

How we know this
  • Perimeter: GWIS (Copernicus), rebuilt from heat detections rather than mapped on imagery; 7 polygons grouped in this page.
  • Dates adjusted with the VIIRS detections inside the perimeter, which said 21 September 2026 to 22 October 2026. 2,061 Suomi-NPP VIIRS detections on those dates.
  • We have not matched this page with any official record.
  • Weather: Copernicus ERA5 reanalysis at the fire location, in cells of about 25 km.
  • Built-up area and population come from the JRC Global Human Settlement Layer (epoch 2025, 100 m cells), summed inside the perimeter: an estimate of what was there, not a damage count.

How we build fire pages: methodology

Where this data comes from

The perimeter comes from the Copernicus Global Wildfire Information System (GWIS), which rebuilds it from MODIS and VIIRS heat detections and publishes it under CC BY 4.0. It is not measured on imagery as in Europe, so it is an estimate. Heat detections come from the VIIRS sensors aboard Suomi-NPP and NOAA-20, distributed by NASA FIRMS at 375 m resolution. Municipal boundaries come from geoBoundaries ADM2 (Creative Commons Attribution 3.0 Intergovernmental Organisations (CC BY 3.0 IGO)). The area per municipality is computed by WorldFires by crossing the perimeter with those boundaries, so it may differ from each country’s official figure.