Skip to content
worldfires
BR · Brazil · –

Marcelândia fire, June 2024 Marcelândia

Out · last detection 23 Jun 2024, 05:04 UTC

The fire started on 22 June 2024 in Marcelândia, Brazil, and satellites saw it burning for 9 days. Copernicus’s global GWIS system rebuilt a burnt perimeter of 3,701 hectares from heat detections, spread across a single municipality.

It is the 1464th largest in Mato Grosso since 2016 (of 1872 with a page). Number 998 in Brazil in 2024, of 1301.

Burnt area
3,701ha
GWIS perimeter (Copernicus)
Duration
9days
22 Jun 2024 – 30 Jun 2024
Municipalities hit
1
municipalities
Started on
22 Jun
2024
Heat detections
212
in a single hotspot: 786 MW
Danger at start
30
High · FWI index
Average daily power
12.4GW
detected power per day, on average

Where it burned

HOTSPOTS BY DAY 22 Jun30 Jun
23 Jun 2024

How it evolved, day by day

22 Jun 2024 · 24,803 MW · 170 23 Jun 2024 · 55 MW · 42
22 Jun 23 Jun

Fire radiative power detected each day, in megawatts, and number of hotspots. The magenta bar marks the peak day.

The weather it burned in

35°high
32km/h · peak gust
22%lowest humidity

It had gone 35 days without rain (1 mm or more) when it started.

This area had burned before

No earlier perimeters overlap this fire since 2016, when the satellite record begins.

How big is it?

10 km
It burned the equivalent of 2.3% of the area of London (37 km² against 1,583 km²).

London boundary: geoBoundaries · Office for National Statistics (Open Government Licence v3.0).

This compares size, not location: both shapes are at the same scale, north up, centred on each other.

What happened to each town

  1. Marcelândia 11,396 inhabitants where it started
    3,723 ha reached on 22 Jun
    0.3 %

Burnt area inside each municipality, from crossing the GWIS perimeter with administrative boundaries. The distance runs from the point marking the centre of each area to the nearest fire: staying a kilometre away does not mean it reached the houses.

People and buildings inside the perimeter

GHSL 2025
Built-up area0.17 ha
Residents< 20

Inside the perimeter there were about 0.17 hectares of built-up land and almost nobody lived there (GHSL 2025, satellite-based estimate).

This is an estimate on 100 m cells, made from satellite imagery and census data: it does not mean that homes burned or that anyone was harmed. The perimeter also contains land that never burned. The GHSL 2025 epoch is a projection made from 2020 and earlier data.

Source: Global Human Settlement Layer (GHS-BUILT-S and GHS-POP R2023A), European Commission Joint Research Centre (JRC), © European Union, CC BY 4.0. Sum inside the perimeter computed by WorldFires. human-settlement.emergency.copernicus.eu

The weather day by day

ECMWF ERA5 reanalysis at the fire location, the standard reference for past weather, and the Canadian Fire Weather Index (the same system Copernicus uses), computed by WorldFires from that data. Days after the fire run until the first rain.

Open-Meteo.com (CC BY 4.0) · Copernicus Climate Change Service (ERA5)

Day High Min. humidity Peak gust Rain Danger (FWI)
22 Jun 33.2 °C 32 % 28 km/h 0.0 mm High 30
23 Jun 33.0 °C 33 % 32 km/h 0.0 mm High 31
24 Jun 34.2 °C 28 % 27 km/h 0.0 mm High 30
25 Jun 33.5 °C 28 % 26 km/h 0.0 mm High 31
26 Jun 33.8 °C 25 % 22 km/h 0.0 mm High 31
27 Jun 33.7 °C 25 % 22 km/h 0.0 mm High 32
28 Jun 34.2 °C 28 % 22 km/h 0.0 mm High 30
29 Jun 34.7 °C 26 % 28 km/h 0.0 mm High 33
30 Jun 34.4 °C 22 % 31 km/h 0.0 mm High 37
1 Jul after 34.1 °C 27 % 26 km/h 0.0 mm High 35
2 Jul after 34.2 °C 31 % 34 km/h 0.0 mm High 36
3 Jul after 34.3 °C 28 % 37 km/h 0.0 mm Very high 39
4 Jul after 33.9 °C 30 % 32 km/h 0.0 mm High 36
5 Jul after 33.9 °C 26 % 33 km/h 0.0 mm High 37
6 Jul after 33.9 °C 30 % 29 km/h 0.0 mm High 37
7 Jul after 34.1 °C 28 % 26 km/h 0.0 mm High 36
8 Jul after 34.1 °C 28 % 20 km/h 0.0 mm High 35
9 Jul after 34.2 °C 27 % 24 km/h 0.0 mm High 34
10 Jul after 33.7 °C 31 % 20 km/h 0.0 mm High 36

Its twins: fires that started in the same weather

It started with an FWI of 29.8, a minimum humidity of 32% and 35 days without rain. Fires in the area that started in weather like this since 2016: 41.

FWI at the start 29.8
Minimum humidity 32 %
Days without rain 35
this fire chosen twins rest of the area
Almost identicalSimilar

Outlines of the closest twins

São José do Xingu fire, September 2018
3,642 ha 9 days FWI 29.9 Min. humidity 31 % 138 km away, in 2018

First rain (1 mm or more) after it ended: 1.6 mm on 27 Sept.

What happened to them

12 days
median duration
3,727 ha
median area
2 %
went past 10,000 ha
2.6 mm
rain at the end (median; 19 of 41 had it)

It burned an area similar to its twins (3,701 ha against a median of 3,727 ha) and lasted 9 days, against 12 days.

In 22 of 41, not even 1 mm fell in the ten days after the end: they went out without rain. In the rest, the first rainy day brought a median of 2.6 mm.

This is a bank of analogues: it shows what usually happens, not what will happen. With fewer than 15 twins we give no figures. How we calculate it

How it ended

—first rain
—no rain in ten days
32km/h · max. gust

It was considered over on 30 Jun, and not even 1 mm fell in the following ten days: it went out without rain. Twins with rain when they ended: 19 of 41, with a median of 2.6 mm.

Weather on this page: Open-Meteo.com (CC BY 4.0) · Copernicus Climate Change Service (ERA5)

How a twin is chosen

  • Same area: fires that have already ended, less than 250 km from this one, since 2016.
  • Same start: we compare the FWI on the first day, the minimum humidity that day and the run of days without rain before it. The slider sets how much they may differ.
  • Only pages with final weather data (ERA5 reanalysis) calculated in the same way as this fire’s; agricultural and grass burns and pages with data under review are left out.
  • Fires burning at the same time as this one (a week before or after) are left out: they share the same spell of weather and do not count as a precedent.
  • They are sorted by similarity, and the outlines of the first five are drawn.

How we calculate it

Before and after, from space

Drag the line to compare the same ground before the fire and after it.

Before · 15 Jun 2024
After · 7 Jul 2024

If the day is cloudy, change the date: each satellite passes once a day. In false colour the burnt ground looks brown or red.

The smoke

CAMS · Copernicus

On 24 June 2024 the air beside the fire reached 11 µg/m³ of PM2.5, but no daily average passed the WHO guideline (15).

PM2.5 peak11 µg/m³
Days over the guideline0 days
PM1016 µg/m³
Optical depth0.15
20 Jun22 Jun24 Jun26 Jun
Good Fair Moderate Poor Very poor Extremely poor

Particles from the Copernicus CAMS model at the centre of the perimeter; these are not measurements in each town. The pale bar is the worst hour, the solid one the daily average.

Open-Meteo.com (CC BY 4.0) · Copernicus Atmosphere Monitoring Service (CAMS)

Detections table · 212Every satellite heat detection, one by one, with time, satellite, power and coordinates.
⬇ Download CSV Times in UTC. Each detection is a 375 m pixel: a large fire yields hundreds per pass.
Date and timeSatelliteFRP (MW)LatLon

Other fires nearby

All fires in Brazil

Frequently asked questions

How long did the Marcelândia fire last?
According to the heat detections seen by satellite inside the perimeter, it burned from 22 June 2024 to 30 June 2024 (9 days). The perimeter dates it from 22 June 2024 to 23 June 2024.
How much area did it burn?
The perimeter GWIS (Copernicus) rebuilt from heat detections is 3,701 hectares (37.0 km²). It is an estimate: official national figures may differ.
Which municipalities burned?
The fire only entered Marcelândia (3,723 ha, 0.3 %).
What was the weather like?
During the fire the temperature reached 34.7 °C, humidity dropped to 22 % and gusts hit 32 km/h. The fire danger index (FWI) reached 37, class High.
Where does this data come from?
From the GWIS (Copernicus) burnt perimeter, NASA FIRMS VIIRS hotspots and the administrative boundaries of Brazil (geoBoundaries). It is not an official report.
How did the fires that started in similar weather in this area end?
Fires less than 250 km away that started since 2016 with a similar FWI, humidity and dry spell: 41. Their median duration was 12 days and their median area 3,727 ha; 2 % went past 10,000 ha. In 22 of 41, not even 1 mm fell in the ten days after the end: they went out without rain. In the rest, the first rainy day brought a median of 2.6 mm.

Where to verify it

A satellite detection is not an official report. Final figures and the fire’s status are published by each country’s emergency service.

Emergency number: 193 · Emergency number and official warnings

Satellite cross-check

History of this page · 1 Changes in area, dates, name, official record or merged pages, compared every night since 24 October 2026.
  1. Last day with fire: 23 June 2024 → 30 June 2024.

RSS Changes to this page With cross-checks and a citable version

Does something look wrong on this page?

This page is built from satellite data and official records, and it sometimes gets things wrong: the wrong dates, the wrong town, two fires merged into one, or something that was not a wildfire at all. If you know this fire first-hand (you live nearby, saw it, fought it or reported on it), tell us what really happened and we will check it.

Report an error
What do you think is wrong?

We will only use your email to reply about this report. Privacy. This is not an emergency service: if there is a fire now, call 193.

How we know this
  • Perimeter: GWIS (Copernicus), rebuilt from heat detections rather than mapped on imagery.
  • Dates adjusted with the VIIRS detections inside the perimeter, which said 22 June 2024 to 23 June 2024. 212 Suomi-NPP VIIRS detections on those dates.
  • We have not matched this page with any official record.
  • Weather: Copernicus ERA5 reanalysis at the fire location, in cells of about 25 km.
  • Built-up area and population come from the JRC Global Human Settlement Layer (epoch 2025, 100 m cells), summed inside the perimeter: an estimate of what was there, not a damage count.

How we build fire pages: methodology

Where this data comes from

The perimeter comes from the Copernicus Global Wildfire Information System (GWIS), which rebuilds it from MODIS and VIIRS heat detections and publishes it under CC BY 4.0. It is not measured on imagery as in Europe, so it is an estimate. Heat detections come from the VIIRS sensors aboard Suomi-NPP and NOAA-20, distributed by NASA FIRMS at 375 m resolution. Municipal boundaries come from geoBoundaries ADM2 (Creative Commons Attribution 3.0 Intergovernmental Organisations (CC BY 3.0 IGO)). The area per municipality is computed by WorldFires by crossing the perimeter with those boundaries, so it may differ from each country’s official figure.