Malpartida de Plasencia fire, August 2020
Malpartida de Plasencia, Plasencia
Out · last measured on 7 Aug 2020
The fire started on 6 August 2020 in Malpartida de Plasencia, Spain, and satellites saw it burning for 2 days. Copernicus mapped a burnt perimeter of 568 hectares from satellite imagery, spread across 2 municipalities. According to EGIF (MITECO), it was detected on 3 August 2020 at 00:38 and declared extinguished on 4 August 2020.
It is the 24th largest in Cáceres since 2016 (of 70 with a page). Number 17 in Spain in 2020, of 89.
This is an index computed from weather model data, not a measurement of the fire nor an official warning. Danger warnings are issued by each country’s authority. Emergency number and official warnings ›
Weather during the fire
model
38.9°C · 17% RH
High of 38.9 °C and minimum humidity of 17% on 6 August 2020; gusts of 35 km/h on 6 August 2020.
These are model values for a cell of about 25 km, not from a weather station: they may differ from what was measured on the ground.
ⓘThis page’s change log has been kept since 24 October 2026: every night what it publishes is compared and the difference is logged. Anything earlier is reconstructed from each source’s date and marked as reconstructed.
Show
· reconstructedofficial
Matched with the official EGIF (MITECO) record
Matches: 558 ha in the official record (records: 1).
A version keeps the area, dates, name and official record; the area as it was logged (changes under 2% are not logged). The map, hotspots and weather always show today’s data.
Citation
A lede of about 60 words figures only, no adjectives
We have the Copernicus perimeter for this fire, but the VIIRS sensors did not capture it in enough detail: no day-by-day evolution, but the split by municipality is there.
Burnt area
568ha
Copernicus perimeter
Duration
2days
6 Aug 2020 – 7 Aug 2020
Municipalities hit
2
municipalities
Started on
6 Aug
2020
Danger at start
53
Extreme · FWI index
Natura 2000
1%
of the perimeter is protected land
Where it burned
The weather it burned in
39°high
35km/h · peak gust
17%lowest humidity
It had gone more than two months without rain (1 mm or more) when it started. Rain came after the fire: 7.4 mm on 11 Aug.
This area had burned before
No earlier perimeters overlap this fire since 2016, when the satellite record begins.
How big is it?
It burned the equivalent of 0.4% of the area of London (5.7 km² against 1,583 km²).
London boundary: geoBoundaries · Office for National Statistics (Open Government Licence v3.0).
It burned the equivalent of 0.9% of the area of Madrid (5.7 km² against 604 km²).
Madrid boundary: geoBoundaries · Open Data ESRI, IGN Central Registry of Cartography Area (CC BY 4.0).
It burned the equivalent of 5.4% of the area of Paris (5.7 km² against 105 km²).
Paris boundary: geoBoundaries · Institut national de l'information géographique et forestière (IGN-F) (Etalab Open License 2.0).
It burned the equivalent of 0.6% of the area of Berlin (5.7 km² against 892 km²).
Berlin boundary: geoBoundaries · Federal Agency for Cartography and Geodesy (dl-de/by-2-0).
Fire perimeterLondon
This compares size, not location: both shapes are at the same scale, north up, centred on each other.
Plasencia40,132 inhabitants · 0.8 km from the centre
151 ha
0.7 %
Burnt area inside each municipality, from crossing the official perimeter with administrative boundaries. The distance runs from the point marking the centre of each area to the nearest fire: staying a kilometre away does not mean it reached the houses.
ECMWF ERA5 reanalysis at the fire location, the standard reference for past weather, and the Canadian Fire Weather Index (the same system Copernicus uses), computed by WorldFires from that data. Days after the fire run until the first rain.
Open-Meteo.com (CC BY 4.0) · Copernicus Climate Change Service (ERA5)
It started with an FWI of 52.8, a minimum humidity of 17% and more than two months without rain. Fires in the area that started in weather like this since 2016: 19.
FWI at the start52.8
Minimum humidity17 %
Days without rain60+
this firechosen twinsrest of the area
Almost identicalSimilar
Outlines of the closest twins
This fire · Malpartida de Plasencia fire, August 2020
568 ha2 daysFWI 52.8Min. humidity 17 %
Alburquerque fire, August 2021
809 ha2 daysFWI 49.2Min. humidity 16 %119 km away, in 2021
First rain (1 mm or more) after it ended: none in the following ten days.
It stayed below its twins: 568 ha against a median of 1,284 ha. It lasted 2 days, against 2 days.
In 14 of 19, not even 1 mm fell in the ten days after the end: they went out without rain. In the rest, the first rainy day brought a median of 5.9 mm.
This is a bank of analogues: it shows what usually happens, not what will happen. With fewer than 15 twins we give no figures. How we calculate it
How it ended
7.4 mmfirst rain
11 Aug4 days after it ended
35km/h · max. gust
It was considered over on 7 Aug, and on 11 Aug 7.4 mm fell. We do not know whether the rain or the firefighters put it out. Twins with rain when they ended: 5 of 19, with a median of 5.9 mm.
Weather on this page: Open-Meteo.com (CC BY 4.0) · Copernicus Climate Change Service (ERA5)
How a twin is chosen
Same area: fires that have already ended, less than 250 km from this one, since 2016.
Same start: we compare the FWI on the first day, the minimum humidity that day and the run of days without rain before it. The slider sets how much they may differ.
Only pages with final weather data (ERA5 reanalysis) calculated in the same way as this fire’s; agricultural and grass burns and pages with data under review are left out.
Fires burning at the same time as this one (a week before or after) are left out: they share the same spell of weather and do not count as a precedent.
They are sorted by similarity, and the outlines of the first five are drawn.
Drag the line to compare the same ground before the fire and after it.
↔
Before · 30 Jul 2020
After · 14 Aug 2020
Sentinel-2 did not pass over on that day. Try another date, or use false colour, which is daily.
If the day is cloudy, change the date: each satellite passes once a day. In false colour the burnt ground looks brown or red.
The smoke
CAMS · Copernicus
On 8 August 2020 the air beside the fire reached 19 µg/m³ of PM2.5, but no daily average passed the WHO guideline (15).
PM2.5 peak19µg/m³
Days over the guideline0days
PM1035µg/m³
WHO 15
4 Aug6 Aug8 Aug10 Aug
GoodFairModeratePoorVery poorExtremely poor
Particles from the Copernicus CAMS model at the centre of the perimeter; these are not measurements in each town. The pale bar is the worst hour, the solid one the daily average.
Open-Meteo.com (CC BY 4.0) · Copernicus Atmosphere Monitoring Service (CAMS)
How long did the Malpartida de Plasencia fire last?
Copernicus dates it between 6 August 2020 and 7 August 2020: 2 days between the first and last image with fire. According to EGIF (MITECO), it was detected on 3 August 2020 at 00:38 and declared extinguished on 4 August 2020.
How much area did it burn?
The perimeter Copernicus measured from satellite imagery is 568 hectares (5.7 km²). Official national figures may differ.
Which municipalities burned?
The fire entered 2 municipalities: Malpartida de Plasencia (418 ha, 1.1 %); Plasencia (151 ha, 0.7 %).
Did the fire reach a town?
The fire came within 0.8 km of the centre of Plasencia, the closest of the areas it touched. That is the distance from the perimeter, or the nearest hotspot, to the point marking the centre; it does not mean it entered the houses.
What was the weather like?
During the fire the temperature reached 38.9 °C, humidity dropped to 17 % and gusts hit 35 km/h. The fire danger index (FWI) reached 53, class Extreme.
Where does this data come from?
From the EFFIS (Copernicus) burnt perimeter, NASA FIRMS VIIRS hotspots and the administrative boundaries of Spain (geoBoundaries). It is not an official report.
How did the fires that started in similar weather in this area end?
Fires less than 250 km away that started since 2016 with a similar FWI, humidity and dry spell: 19. Their median duration was 2 days and their median area 1,284 ha; 53 % went past 1,000 ha. In 14 of 19, not even 1 mm fell in the ten days after the end: they went out without rain. In the rest, the first rainy day brought a median of 5.9 mm.
Where to verify it
A satellite detection is not an official report. Final figures and the fire’s status are published by each country’s emergency service.
This page is built from satellite data and official records, and it sometimes gets things wrong: the wrong dates, the wrong town, two fires merged into one, or something that was not a wildfire at all. If you know this fire first-hand (you live nearby, saw it, fought it or reported on it), tell us what really happened and we will check it.
⚑Report an errorHow we know this›
Perimeter: EFFIS (Copernicus), mapped on satellite imagery.
Dates from the perimeter: the VIIRS detections inside it did not change them. No Suomi-NPP VIIRS detections on those dates.
Compared with EGIF (MITECO): 558 official ha against 568 ha of perimeter; they agree within 25%.
Weather: Copernicus ERA5 reanalysis at the fire location, in cells of about 25 km.
The perimeter and land cover come from the Copernicus European Forest Fire Information System (EFFIS), measured on MODIS and Sentinel-2 imagery and published under CC BY 4.0. Heat detections come from the VIIRS sensors aboard Suomi-NPP and NOAA-20, distributed by NASA FIRMS at 375 m resolution. Municipal boundaries come from geoBoundaries ADM3 (Creative Commons Attribution 4.0 International (CC BY 4.0)). The area per municipality is computed by WorldFires by crossing the perimeter with those boundaries, so it may differ slightly from each country’s official figure.