Skip to content
worldfires
TH · Thailand · –

Mae Sariang fire, 13 March 2018 แม่สะเรียง · Mae Sariang

Out · last detection 7 Apr 2018, 06:42 UTC

The fire started on 13 March 2018 in Mae Sariang, Thailand, and satellites saw it burning for 27 days. Copernicus’s global GWIS system rebuilt a burnt perimeter of 9,657 hectares from heat detections, spread across a single municipality.

It is the 9th largest in Mae Hong Son Province since 2016 (of 361 with a page). Number 4 in Thailand in 2018, of 84.

Burnt area
9,657ha
GWIS perimeter (Copernicus)
Duration
27days
13 Mar 2018 – 8 Apr 2018
Municipalities hit
1
districts
Started on
13 Mar
2018
Heat detections
397
in a single hotspot: 100 MW
Danger at start
26
High · FWI index
Average daily power
48MW
detected power per day, on average

Where it burned

HOTSPOTS BY DAY 13 Mar8 Apr
7 Apr 2018

How it evolved, day by day

13 Mar 2018 · 1 MW · 1 14 Mar 2018 · 3 MW · 2 15 Mar 2018 · 5 MW · 1 16 Mar 2018 · 8 MW · 4 17 Mar 2018 · 18 MW · 9 18 Mar 2018 · 41 MW · 13 19 Mar 2018 · 7 MW · 5 20 Mar 2018 · 120 MW · 21 21 Mar 2018 · 51 MW · 12 22 Mar 2018 · 177 MW · 76 23 Mar 2018 · 197 MW · 73 24 Mar 2018 · 25 MW · 10 25 Mar 2018 · 36 MW · 15 26 Mar 2018 · 25 MW · 10 27 Mar 2018 · 133 MW · 45 28 Mar 2018 · 52 MW · 30 29 Mar 2018 · 12 MW · 11 30 Mar 2018 · 2 MW · 1 31 Mar 2018 · 63 MW · 16 1 Apr 2018 · 26 MW · 7 2 Apr 2018 · 8 MW · 11 3 Apr 2018 · 4 MW · 2 4 Apr 2018 · 14 MW · 2 5 Apr 2018 · 169 MW · 10 6 Apr 2018 · 33 MW · 5 7 Apr 2018 · 18 MW · 5
13 Mar 23 Mar 31 Mar 6 Apr

Fire radiative power detected each day, in megawatts, and number of hotspots. The magenta bar marks the peak day.

The weather it burned in

36°high
35km/h · peak gust
23%lowest humidity

It had gone 59 days without rain (1 mm or more) when it started. Rain came after the fire: 2.0 mm on 14 Apr.

This area had burned before

82% of the perimeter overlaps earlier fires recorded since 2016: 5,124 ha in 2016, 6,207 ha in 2017. Part of it burned more than once, so the yearly figures add up to more than the 7,919 ha that had burned before.

How big is it?

10 km
It burned the equivalent of 6.1% of the area of London (97 km² against 1,583 km²).

London boundary: geoBoundaries · Office for National Statistics (Open Government Licence v3.0).

This compares size, not location: both shapes are at the same scale, north up, centred on each other.

What happened to each town

  1. Mae Sariang แม่สะเรียง where it started
    9,796 ha reached on 13 Mar
    3.7 %

Burnt area inside each municipality, from crossing the GWIS perimeter with administrative boundaries. The distance runs from the point marking the centre of each area to the nearest fire: staying a kilometre away does not mean it reached the houses.

People and buildings inside the perimeter

GHSL 2020
Built-up area0.65 ha
Residents≈ 70

Inside the perimeter there were about 0.65 hectares of built-up land and about 70 residents (GHSL 2020, satellite-based estimate).

This is an estimate on 100 m cells, made from satellite imagery and census data: it does not mean that homes burned or that anyone was harmed. The perimeter also contains land that never burned.

Source: Global Human Settlement Layer (GHS-BUILT-S and GHS-POP R2023A), European Commission Joint Research Centre (JRC), © European Union, CC BY 4.0. Sum inside the perimeter computed by WorldFires. human-settlement.emergency.copernicus.eu

The weather day by day

ECMWF ERA5 reanalysis at the fire location, the standard reference for past weather, and the Canadian Fire Weather Index (the same system Copernicus uses), computed by WorldFires from that data. Days after the fire run until the first rain.

Open-Meteo.com (CC BY 4.0) · Copernicus Climate Change Service (ERA5)

Day High Min. humidity Peak gust Rain Danger (FWI)
13 Mar 34.1 °C 28 % 21 km/h 0.0 mm High 26
14 Mar 33.7 °C 28 % 26 km/h 0.0 mm High 29
15 Mar 34.1 °C 32 % 19 km/h 0.0 mm High 26
16 Mar 34.8 °C 32 % 21 km/h 0.0 mm High 28
17 Mar 33.3 °C 38 % 28 km/h 0.0 mm High 31
18 Mar 35.0 °C 27 % 33 km/h 0.0 mm High 38
19 Mar 34.7 °C 31 % 23 km/h 0.0 mm High 31
20 Mar 35.1 °C 32 % 18 km/h 0.0 mm High 29
21 Mar 35.3 °C 33 % 26 km/h 0.0 mm High 31
22 Mar 36.0 °C 23 % 29 km/h 0.0 mm High 34
23 Mar 34.0 °C 38 % 30 km/h 0.0 mm High 37
24 Mar 35.9 °C 30 % 21 km/h 0.0 mm High 31
25 Mar 36.4 °C 29 % 19 km/h 0.0 mm High 30
26 Mar 35.9 °C 32 % 23 km/h 0.0 mm High 33
27 Mar 35.7 °C 27 % 35 km/h 0.0 mm Very high 39
28 Mar 35.1 °C 33 % 26 km/h 0.0 mm High 32
29 Mar 33.5 °C 44 % 20 km/h 0.0 mm High 26
30 Mar 33.6 °C 38 % 19 km/h 0.0 mm High 23
31 Mar 33.6 °C 41 % 24 km/h 0.3 mm High 23
1 Apr 34.4 °C 33 % 18 km/h 1.0 mm High 26
2 Apr 33.6 °C 41 % 22 km/h 2.5 mm Moderate 21
3 Apr 31.6 °C 51 % 20 km/h 10.7 mm Very low 2
4 Apr 31.7 °C 55 % 24 km/h 10.3 mm Very low 3
5 Apr 31.6 °C 52 % 25 km/h 2.4 mm Very low 1
6 Apr 32.4 °C 46 % 20 km/h 0.0 mm Very low 2
7 Apr 32.8 °C 50 % 32 km/h 0.3 mm Low 11
8 Apr 27.7 °C 54 % 22 km/h 0.5 mm Low 10
9 Apr after 33.6 °C 40 % 18 km/h 0.1 mm Moderate 14
10 Apr after 34.7 °C 40 % 19 km/h 0.0 mm Moderate 15
11 Apr after 35.6 °C 42 % 22 km/h 0.5 mm Moderate 16
12 Apr after 36.6 °C 35 % 27 km/h 0.2 mm Moderate 20
13 Apr after 37.0 °C 34 % 31 km/h 0.8 mm High 22
14 Apr after 36.1 °C 38 % 28 km/h 2.0 mm Moderate 20

Its twins: fires that started in the same weather

It started with an FWI of 26.3, a minimum humidity of 28% and 59 days without rain. Fires in the area that started in weather like this since 2016: 52.

FWI at the start 26.3
Minimum humidity 28 %
Days without rain 59
this fire chosen twins rest of the area
Almost identicalSimilar

Outlines of the closest twins

Mae Sariang fire, March 2017
1,188 ha 5 days FWI 30.5 Min. humidity 27 % 4 km away, in 2017

First rain (1 mm or more) after it ended: none in the following ten days.

What happened to them

9 days
median duration
2,036 ha
median area
100 %
went past 1,000 ha
2.1 mm
rain at the end (median; 13 of 52 had it)

It was 4.7 times larger than the median of its twins and lasted 27 days, against 9 days.

Only 1 of its 52 twins burned more. The weather on the first day does not explain everything: the wind in the following days, the fuel and the firefighting also count. In 39 of 52, not even 1 mm fell in the ten days after the end: they went out without rain. In the rest, the first rainy day brought a median of 2.1 mm.

This is a bank of analogues: it shows what usually happens, not what will happen. With fewer than 15 twins we give no figures. How we calculate it

How it ended

2.0 mmfirst rain
14 Apr6 days after it ended
35km/h · max. gust

It was considered over on 8 Apr, and on 14 Apr 2.0 mm fell. We do not know whether the rain or the firefighters put it out. Twins with rain when they ended: 13 of 52, with a median of 2.1 mm.

Weather on this page: Open-Meteo.com (CC BY 4.0) · Copernicus Climate Change Service (ERA5)

How a twin is chosen

  • Same area: fires that have already ended, less than 250 km from this one, since 2016.
  • Same start: we compare the FWI on the first day, the minimum humidity that day and the run of days without rain before it. The slider sets how much they may differ.
  • Only pages with final weather data (ERA5 reanalysis) calculated in the same way as this fire’s; agricultural and grass burns and pages with data under review are left out.
  • Fires burning at the same time as this one (a week before or after) are left out: they share the same spell of weather and do not count as a precedent.
  • They are sorted by similarity, and the outlines of the first five are drawn.

How we calculate it

Before and after, from space

Drag the line to compare the same ground before the fire and after it.

Before · 6 Mar 2018
After · 15 Apr 2018

If the day is cloudy, change the date: each satellite passes once a day. In false colour the burnt ground looks brown or red.

Detections table · 397Every satellite heat detection, one by one, with time, satellite, power and coordinates.
⬇ Download CSV Times in UTC. Each detection is a 375 m pixel: a large fire yields hundreds per pass.
Date and timeSatelliteFRP (MW)LatLon

Other fires nearby

All fires in Thailand

Frequently asked questions

How long did the Mae Sariang fire last?
According to the heat detections seen by satellite inside the perimeter, it burned from 13 March 2018 to 8 April 2018 (27 days). The perimeter dates it from 16 March 2018 to 2 April 2018.
How much area did it burn?
The perimeter GWIS (Copernicus) rebuilt from heat detections is 9,657 hectares (96.6 km²). It is an estimate: official national figures may differ.
Which municipalities burned?
The fire only entered Mae Sariang (9,796 ha, 3.7 %).
What was the weather like?
During the fire the temperature reached 36.4 °C, humidity dropped to 23 % and gusts hit 35 km/h. The fire danger index (FWI) reached 39, class Very high.
Where does this data come from?
From the GWIS (Copernicus) burnt perimeter, NASA FIRMS VIIRS hotspots and the administrative boundaries of Thailand (geoBoundaries). It is not an official report.
How did the fires that started in similar weather in this area end?
Fires less than 250 km away that started since 2016 with a similar FWI, humidity and dry spell: 52. Their median duration was 9 days and their median area 2,036 ha; 100 % went past 1,000 ha. Only 1 of its 52 twins burned more. The weather on the first day does not explain everything: the wind in the following days, the fuel and the firefighting also count. In 39 of 52, not even 1 mm fell in the ten days after the end: they went out without rain. In the rest, the first rainy day brought a median of 2.1 mm.

Where to verify it

A satellite detection is not an official report. Final figures and the fire’s status are published by each country’s emergency service.

Emergency number: 199 · 191 · Emergency number and official warnings

Satellite cross-check

History of this page · 2 Changes in area, dates, name, official record or merged pages, compared every night since 24 October 2026.
  1. Last day with fire: 2 April 2018 → 8 April 2018.
  2. Start date: 16 March 2018 → 13 March 2018.

RSS Changes to this page With cross-checks and a citable version

Does something look wrong on this page?

This page is built from satellite data and official records, and it sometimes gets things wrong: the wrong dates, the wrong town, two fires merged into one, or something that was not a wildfire at all. If you know this fire first-hand (you live nearby, saw it, fought it or reported on it), tell us what really happened and we will check it.

Report an error
What do you think is wrong?

We will only use your email to reply about this report. Privacy. This is not an emergency service: if there is a fire now, call 199 · 191.

How we know this
  • Perimeter: GWIS (Copernicus), rebuilt from heat detections rather than mapped on imagery; 3 polygons grouped in this page.
  • Dates adjusted with the VIIRS detections inside the perimeter, which said 16 March 2018 to 2 April 2018. 397 Suomi-NPP VIIRS detections on those dates.
  • We have not matched this page with any official record.
  • Weather: Copernicus ERA5 reanalysis at the fire location, in cells of about 25 km.
  • Built-up area and population come from the JRC Global Human Settlement Layer (epoch 2020, 100 m cells), summed inside the perimeter: an estimate of what was there, not a damage count.

How we build fire pages: methodology

Where this data comes from

The perimeter comes from the Copernicus Global Wildfire Information System (GWIS), which rebuilds it from MODIS and VIIRS heat detections and publishes it under CC BY 4.0. It is not measured on imagery as in Europe, so it is an estimate. Heat detections come from the VIIRS sensors aboard Suomi-NPP and NOAA-20, distributed by NASA FIRMS at 375 m resolution. Municipal boundaries come from geoBoundaries ADM2 (Creative Commons Attribution 3.0 Intergovernmental Organisations (CC BY 3.0 IGO)). The area per municipality is computed by WorldFires by crossing the perimeter with those boundaries, so it may differ from each country’s official figure.