Skip to content
worldfires
MZ · Mozambique · →

Lugela fire, 10 August 2026 Lugela, Molumbo, Milange

Out · last detection 15 Sept 2026, 22:52 UTC

The fire started on 10 August 2026 in Lugela, Mozambique, and satellites saw it burning for 36 days. Copernicus’s global GWIS system rebuilt a burnt perimeter of 74,073 hectares from heat detections, spread across 3 municipalities.

It is the 20th largest in Zambézia since 2016 (of 842 with a page). Number 13 in Mozambique in 2026, of 537.

Compare with…
Burnt area
74,073ha
GWIS perimeter (Copernicus)
Duration
36days
10 Aug 2026 – 14 Sept 2026
Municipalities hit
3
districts
Started on
10 Aug
2026
Heat detections
2,341
in a single hotspot: 85 MW
Danger at start
19
Moderate · FWI index
Average daily power
550MW
detected power per day, on average

Where it burned

HOTSPOTS BY DAY 10 Aug14 Sept
15 Sept 2026

How it evolved, day by day

10 Aug 2026 · 12 MW · 3 11 Aug 2026 · 506 MW · 58 12 Aug 2026 · 142 MW · 21 15 Aug 2026 · 30 MW · 2 16 Aug 2026 · 134 MW · 23 17 Aug 2026 · 63 MW · 13 18 Aug 2026 · 98 MW · 11 19 Aug 2026 · 107 MW · 16 20 Aug 2026 · 316 MW · 48 21 Aug 2026 · 915 MW · 107 22 Aug 2026 · 1,694 MW · 191 23 Aug 2026 · 2,595 MW · 265 24 Aug 2026 · 29 MW · 7 25 Aug 2026 · 507 MW · 71 26 Aug 2026 · 56 MW · 11 27 Aug 2026 · 474 MW · 76 28 Aug 2026 · 123 MW · 19 29 Aug 2026 · 27 MW · 5 30 Aug 2026 · 437 MW · 61 31 Aug 2026 · 66 MW · 17 1 Sept 2026 · 1,712 MW · 164 2 Sept 2026 · 2,053 MW · 301 3 Sept 2026 · 1,798 MW · 247 4 Sept 2026 · 1,200 MW · 169 5 Sept 2026 · 410 MW · 70 6 Sept 2026 · 289 MW · 78 7 Sept 2026 · 131 MW · 19 10 Sept 2026 · 28 MW · 4 11 Sept 2026 · 71 MW · 6 12 Sept 2026 · 446 MW · 39 13 Sept 2026 · 229 MW · 29 14 Sept 2026 · 426 MW · 45 15 Sept 2026 · 1,044 MW · 145
10 Aug 17 Aug 22 Aug 23 Aug 27 Aug 1 Sept 6 Sept 13 Sept

Fire radiative power detected each day, in megawatts, and number of hotspots. The magenta bar marks the peak day.

The weather it burned in

31°high
45km/h · peak gust
22%lowest humidity

It had gone 7 days without rain (1 mm or more) when it started.

This area had burned before

92% of the perimeter overlaps earlier fires recorded since 2016: 37,199 ha in 2016, 31,560 ha in 2017, 32,436 ha in 2018, 14,226 ha in 2019, 25,204 ha in 2020, 21,747 ha in 2021, 37,598 ha in 2022, 20,620 ha in 2023, 30,107 ha in 2024, 40,768 ha in 2025. Part of it burned more than once, so the yearly figures add up to more than the 68,158 ha that had burned before.

How big is it?

10 km
It burned the equivalent of 47% of the area of London (741 km² against 1,583 km²).

London boundary: geoBoundaries · Office for National Statistics (Open Government Licence v3.0).

This compares size, not location: both shapes are at the same scale, north up, centred on each other.

What happened to each town

  1. Lugela where it started
    50,573 ha reached on 10 Aug
    8.2 %
  2. 13,331 ha reached on 10 Aug
    3.1 %
  3. 10,539 ha reached on 11 Aug
    1.9 %

Burnt area inside each municipality, from crossing the GWIS perimeter with administrative boundaries. The distance runs from the point marking the centre of each area to the nearest fire: staying a kilometre away does not mean it reached the houses.

People and buildings inside the perimeter

GHSL 2025
Built-up area84 ha
Residents≈ 26,000

Inside the perimeter there were about 84 hectares of built-up land and about 26,000 residents (GHSL 2025, satellite-based estimate).

This is an estimate on 100 m cells, made from satellite imagery and census data: it does not mean that homes burned or that anyone was harmed. The perimeter also contains land that never burned. The GHSL 2025 epoch is a projection made from 2020 and earlier data.

Source: Global Human Settlement Layer (GHS-BUILT-S and GHS-POP R2023A), European Commission Joint Research Centre (JRC), © European Union, CC BY 4.0. Sum inside the perimeter computed by WorldFires. human-settlement.emergency.copernicus.eu

The weather day by day

ECMWF ERA5 reanalysis at the fire location, the standard reference for past weather, and the Canadian Fire Weather Index (the same system Copernicus uses), computed by WorldFires from that data. Days after the fire run until the first rain.

Open-Meteo.com (CC BY 4.0) · Copernicus Climate Change Service (ERA5)

Day High Min. humidity Peak gust Rain Danger (FWI)
10 Aug 29.0 °C 33 % 31 km/h 0.0 mm Moderate 19
11 Aug 29.9 °C 32 % 31 km/h 0.0 mm Moderate 20
12 Aug 26.1 °C 46 % 37 km/h 0.6 mm Moderate 19
13 Aug 19.2 °C 79 % 41 km/h 7.4 mm Very low 0
14 Aug 19.4 °C 73 % 38 km/h 4.6 mm Very low 0
15 Aug 21.2 °C 53 % 38 km/h 0.7 mm Very low 2
16 Aug 23.1 °C 47 % 31 km/h 0.0 mm Low 5
17 Aug 23.5 °C 46 % 27 km/h 0.0 mm Low 8
18 Aug 25.4 °C 42 % 26 km/h 0.0 mm Low 10
19 Aug 26.0 °C 43 % 27 km/h 0.0 mm Moderate 12
20 Aug 25.4 °C 51 % 27 km/h 0.2 mm Moderate 12
21 Aug 28.3 °C 41 % 32 km/h 0.0 mm Moderate 14
22 Aug 29.2 °C 29 % 33 km/h 0.0 mm Moderate 19
23 Aug 30.1 °C 22 % 27 km/h 0.0 mm High 22
24 Aug 25.9 °C 40 % 37 km/h 0.1 mm Moderate 20
25 Aug 25.7 °C 46 % 26 km/h 0.2 mm Moderate 16
26 Aug 24.7 °C 57 % 27 km/h 0.4 mm Moderate 14
27 Aug 24.8 °C 43 % 42 km/h 0.9 mm Moderate 14
28 Aug 25.0 °C 49 % 33 km/h 0.8 mm Moderate 12
29 Aug 23.9 °C 53 % 29 km/h 1.3 mm Low 6
30 Aug 29.6 °C 32 % 30 km/h 0.0 mm Moderate 17
31 Aug 30.4 °C 26 % 31 km/h 0.0 mm High 23
1 Sept 29.7 °C 29 % 36 km/h 0.0 mm High 25
2 Sept 29.7 °C 27 % 36 km/h 0.0 mm High 25
3 Sept 29.9 °C 30 % 30 km/h 0.0 mm High 24
4 Sept 31.2 °C 29 % 45 km/h 0.0 mm High 31
5 Sept 30.2 °C 35 % 28 km/h 0.0 mm High 26
6 Sept 29.0 °C 38 % 34 km/h 0.0 mm High 26
7 Sept 27.3 °C 38 % 42 km/h 0.1 mm High 28
8 Sept 21.5 °C 62 % 44 km/h 3.1 mm Low 5
9 Sept 23.1 °C 59 % 30 km/h 2.2 mm Very low 4
10 Sept 26.4 °C 58 % 30 km/h 0.4 mm Low 6
11 Sept 28.1 °C 51 % 26 km/h 0.4 mm Moderate 13
12 Sept 30.1 °C 35 % 30 km/h 0.0 mm Moderate 21
13 Sept 30.0 °C 32 % 26 km/h 0.0 mm High 21
14 Sept 30.1 °C 31 % 24 km/h 0.0 mm High 22
15 Sept after 32.4 °C 23 % 36 km/h 0.0 mm High 30
16 Sept after 31.8 °C 23 % 47 km/h 0.0 mm High 35
17 Sept after 31.6 °C 26 % 28 km/h 0.0 mm High 28
18 Sept after 31.4 °C 24 % 35 km/h 0.0 mm High 33
19 Sept after 28.5 °C 33 % 35 km/h 0.0 mm High 30
20 Sept after 28.5 °C 33 % 31 km/h 0.0 mm High 30
21 Sept after 28.9 °C 46 % 30 km/h 0.3 mm High 25
22 Sept after 25.8 °C 52 % 33 km/h 0.1 mm High 22
23 Sept after 28.2 °C 40 % 33 km/h 0.0 mm High 22
24 Sept after 29.3 °C 37 % 35 km/h 0.0 mm High 26

Before and after, from space

Drag the line to compare the same ground before the fire and after it.

Before · 3 Aug 2026
After · 21 Sept 2026

If the day is cloudy, change the date: each satellite passes once a day. In false colour the burnt ground looks brown or red.

The smoke

CAMS · Copernicus

On 3 September 2026 the air beside the fire reached 147 µg/m³ of PM2.5. That day averaged 88: 5.9 times the WHO daily guideline (15).

PM2.5 peak147 µg/m³
Days over the guideline20 days
PM10150 µg/m³
Optical depth1.22
1415161718192021222324252627282930311234567891011121314151617
Good Fair Moderate Poor Very poor Extremely poor

Particles from the Copernicus CAMS model at the centre of the perimeter; these are not measurements in each town. The pale bar is the worst hour, the solid one the daily average.

Open-Meteo.com (CC BY 4.0) · Copernicus Atmosphere Monitoring Service (CAMS)

Detections table · 2,341Every satellite heat detection, one by one, with time, satellite, power and coordinates.
⬇ Download CSV Times in UTC. Each detection is a 375 m pixel: a large fire yields hundreds per pass.
Date and timeSatelliteFRP (MW)LatLon

Other fires nearby

All fires in Mozambique ›

Frequently asked questions

How long did the Lugela fire last?
According to the heat detections seen by satellite inside the perimeter, it burned from 10 August 2026 to 14 September 2026 (36 days). The perimeter dates it from 16 August 2026 to 7 September 2026.
How much area did it burn?
The perimeter GWIS (Copernicus) rebuilt from heat detections is 74,073 hectares (740.7 km²). It is an estimate: official national figures may differ.
Which municipalities burned?
The fire entered 3 municipalities: Lugela (50,573 ha, 8.2 %); Molumbo (13,331 ha, 3.1 %); Milange (10,539 ha, 1.9 %).
What was the weather like?
During the fire the temperature reached 31.2 °C, humidity dropped to 22 % and gusts hit 45 km/h. The fire danger index (FWI) reached 31, class High.
Where does this data come from?
From the GWIS (Copernicus) burnt perimeter, NASA FIRMS VIIRS hotspots and the administrative boundaries of Mozambique (geoBoundaries). It is not an official report.

Where to verify it

A satellite detection is not an official report. Final figures and the fire’s status are published by each country’s emergency service.

Satellite cross-check

History of this page · 1 Changes in area, dates, name, official record or merged pages, compared every night since 24 October 2026.
  1. Start date: 16 August 2026 → 10 August 2026.

RSS Changes to this page

Does something look wrong on this page?

This page is built from satellite data and official records, and it sometimes gets things wrong: the wrong dates, the wrong town, two fires merged into one, or something that was not a wildfire at all. If you know this fire first-hand (you live nearby, saw it, fought it or reported on it), tell us what really happened and we will check it.

Report an error
What do you think is wrong?

We will only use your email to reply about this report. Privacy.

How we know this
  • Perimeter: GWIS (Copernicus), rebuilt from heat detections rather than mapped on imagery; 10 polygons grouped in this page.
  • Dates adjusted with the VIIRS detections inside the perimeter, which said 16 August 2026 to 7 September 2026. 2,341 Suomi-NPP VIIRS detections on those dates.
  • We have not matched this page with any official record.
  • Weather: Copernicus ERA5 reanalysis at the fire location, in cells of about 25 km.
  • Built-up area and population come from the JRC Global Human Settlement Layer (epoch 2025, 100 m cells), summed inside the perimeter: an estimate of what was there, not a damage count.

How we build fire pages: methodology ›

Where this data comes from

The perimeter comes from the Copernicus Global Wildfire Information System (GWIS), which rebuilds it from MODIS and VIIRS heat detections and publishes it under CC BY 4.0. It is not measured on imagery as in Europe, so it is an estimate. Heat detections come from the VIIRS sensors aboard Suomi-NPP and NOAA-20, distributed by NASA FIRMS at 375 m resolution. Municipal boundaries come from geoBoundaries ADM2 (Creative Commons Attribution 3.0 Intergovernmental Organisations (CC BY 3.0 IGO)). The area per municipality is computed by WorldFires by crossing the perimeter with those boundaries, so it may differ from each country’s official figure.