Skip to content
worldfires
CL · Chile · –

Los Ángeles fire, 4 February 2023 Los Ángeles

Out · last detection 11 Feb 2023, 05:52 UTC

The fire started on 4 February 2023 in Los Ángeles, Chile, and satellites saw it burning for 8 days. Copernicus’s global GWIS system rebuilt a burnt perimeter of 2,246 hectares from heat detections, spread across a single municipality.

It is the 27th largest in Región del Bío-Bío since 2016 (of 62 with a page). Number 43 in Chile in 2023, of 70.

Burnt area
2,246ha
GWIS perimeter (Copernicus)
Duration
8days
4 Feb 2023 – 11 Feb 2023
Municipalities hit
1
communes
Started on
4 Feb
2023
Heat detections
172
in a single hotspot: 223 MW
Danger at start
34
High · FWI index
Average daily power
456MW
detected power per day, on average

Where it burned

HOTSPOTS BY DAY 4 Feb11 Feb
11 Feb 2023

How it evolved, day by day

4 Feb 2023 · 161 MW · 31 5 Feb 2023 · 643 MW · 29 6 Feb 2023 · 2,132 MW · 72 7 Feb 2023 · 229 MW · 35 8 Feb 2023 · 22 MW · 3 9 Feb 2023 · 6 MW · 1 11 Feb 2023 · 0 MW · 1
4 Feb 6 Feb 8 Feb 11 Feb

Fire radiative power detected each day, in megawatts, and number of hotspots. The magenta bar marks the peak day.

The weather it burned in

32°high
49km/h · peak gust
24%lowest humidity

It had gone 10 days without rain (1 mm or more) when it started.

This area had burned before

18% of the perimeter overlaps earlier fires recorded since 2016: 406 ha in 2022.

How big is it?

10 km
It burned the equivalent of 1.4% of the area of London (22 km² against 1,583 km²).

London boundary: geoBoundaries · Office for National Statistics (Open Government Licence v3.0).

This compares size, not location: both shapes are at the same scale, north up, centred on each other.

What happened to each town

  1. Los Ángeles where it started
    2,255 ha reached on 4 Feb
    1.3 %

Burnt area inside each municipality, from crossing the GWIS perimeter with administrative boundaries. The distance runs from the point marking the centre of each area to the nearest fire: staying a kilometre away does not mean it reached the houses.

People and buildings inside the perimeter

GHSL 2025
Built-up area1.3 ha
Residents≈ 80

Inside the perimeter there were about 1.3 hectares of built-up land and about 80 residents (GHSL 2025, satellite-based estimate).

This is an estimate on 100 m cells, made from satellite imagery and census data: it does not mean that homes burned or that anyone was harmed. The perimeter also contains land that never burned. The GHSL 2025 epoch is a projection made from 2020 and earlier data.

Source: Global Human Settlement Layer (GHS-BUILT-S and GHS-POP R2023A), European Commission Joint Research Centre (JRC), © European Union, CC BY 4.0. Sum inside the perimeter computed by WorldFires. human-settlement.emergency.copernicus.eu

The weather day by day

ECMWF ERA5 reanalysis at the fire location, the standard reference for past weather, and the Canadian Fire Weather Index (the same system Copernicus uses), computed by WorldFires from that data. Days after the fire run until the first rain.

Open-Meteo.com (CC BY 4.0) · Copernicus Climate Change Service (ERA5)

Day High Min. humidity Peak gust Rain Danger (FWI)
4 Feb 32.2 °C 37 % 31 km/h 0.0 mm High 34
5 Feb 29.8 °C 35 % 41 km/h 0.0 mm High 35
6 Feb 30.4 °C 31 % 49 km/h 0.0 mm Very high 44
7 Feb 30.6 °C 24 % 43 km/h 0.0 mm Very high 45
8 Feb 30.5 °C 31 % 31 km/h 0.0 mm High 33
9 Feb 31.3 °C 25 % 34 km/h 0.0 mm Very high 38
10 Feb 29.7 °C 35 % 38 km/h 0.0 mm High 31
11 Feb 29.1 °C 28 % 35 km/h 0.0 mm High 33
12 Feb after 26.0 °C 44 % 39 km/h 0.1 mm High 35
13 Feb after 25.7 °C 33 % 37 km/h 0.0 mm High 26
14 Feb after 23.9 °C 38 % 41 km/h 0.0 mm High 35
15 Feb after 25.3 °C 41 % 52 km/h 0.0 mm Very high 43
16 Feb after 22.3 °C 30 % 56 km/h 0.0 mm Very high 50
17 Feb after 28.5 °C 12 % 42 km/h 0.0 mm Extreme 56
18 Feb after 29.4 °C 17 % 25 km/h 0.0 mm Very high 39
19 Feb after 28.1 °C 33 % 36 km/h 0.0 mm Very high 39
20 Feb after 28.0 °C 26 % 38 km/h 0.0 mm Very high 42
21 Feb after 29.2 °C 26 % 38 km/h 0.0 mm Very high 43

Its twins: fires that started in the same weather

It started with an FWI of 34.1, a minimum humidity of 37% and 10 days without rain. Fires in the area that started in weather like this since 2016: 20.

FWI at the start 34.1
Minimum humidity 37 %
Days without rain 10
this fire chosen twins rest of the area
Almost identicalSimilar

Outlines of the closest twins

Hualqui fire, January 2020
1,398 ha 2 days FWI 32.3 Min. humidity 37 % 86 km away, in 2020

First rain (1 mm or more) after it ended: none in the following ten days.

What happened to them

4 days
median duration
1,447 ha
median area
100 %
went past 1,000 ha
6.0 mm
rain at the end (median; 11 of 20 had it)

It was 1.6 times larger than the median of its twins and lasted 8 days, against 4 days.

Only 5 of its 20 twins burned more. The weather on the first day does not explain everything: the wind in the following days, the fuel and the firefighting also count. In 9 of 20, not even 1 mm fell in the ten days after the end: they went out without rain. In the rest, the first rainy day brought a median of 6.0 mm.

This is a bank of analogues: it shows what usually happens, not what will happen. With fewer than 15 twins we give no figures. How we calculate it

How it ended

—first rain
—no rain in ten days
49km/h · max. gust

It was considered over on 11 Feb, and not even 1 mm fell in the following ten days: it went out without rain. Twins with rain when they ended: 11 of 20, with a median of 6.0 mm.

Weather on this page: Open-Meteo.com (CC BY 4.0) · Copernicus Climate Change Service (ERA5)

How a twin is chosen

  • Same area: fires that have already ended, less than 250 km from this one, since 2016.
  • Same start: we compare the FWI on the first day, the minimum humidity that day and the run of days without rain before it. The slider sets how much they may differ.
  • Only pages with final weather data (ERA5 reanalysis) calculated in the same way as this fire’s; agricultural and grass burns and pages with data under review are left out.
  • Fires burning at the same time as this one (a week before or after) are left out: they share the same spell of weather and do not count as a precedent.
  • They are sorted by similarity, and the outlines of the first five are drawn.

How we calculate it

Before and after, from space

Drag the line to compare the same ground before the fire and after it.

Before · 28 Jan 2023
After · 18 Feb 2023

If the day is cloudy, change the date: each satellite passes once a day. In false colour the burnt ground looks brown or red.

The smoke

CAMS · Copernicus

On 5 February 2023 the air beside the fire reached 771 µg/m³ of PM2.5. That day averaged 495: 33 times the WHO daily guideline (15).

PM2.5 peak771 µg/m³
Days over the guideline9 days
PM101,103 µg/m³
Optical depth5.66
2 Feb5 Feb8 Feb11 Feb
Good Fair Moderate Poor Very poor Extremely poor

Particles from the Copernicus CAMS model at the centre of the perimeter; these are not measurements in each town. The pale bar is the worst hour, the solid one the daily average.

Open-Meteo.com (CC BY 4.0) · Copernicus Atmosphere Monitoring Service (CAMS)

Detections table · 172Every satellite heat detection, one by one, with time, satellite, power and coordinates.
⬇ Download CSV Times in UTC. Each detection is a 375 m pixel: a large fire yields hundreds per pass.
Date and timeSatelliteFRP (MW)LatLon

Other fires nearby

All fires in Chile

Frequently asked questions

How long did the Los Ángeles fire last?
According to the heat detections seen by satellite inside the perimeter, it burned from 4 February 2023 to 11 February 2023 (8 days). The perimeter dates it from 4 February 2023 to 9 February 2023.
How much area did it burn?
The perimeter GWIS (Copernicus) rebuilt from heat detections is 2,246 hectares (22.5 km²). It is an estimate: official national figures may differ.
Which municipalities burned?
The fire only entered Los Ángeles (2,255 ha, 1.3 %).
What was the weather like?
During the fire the temperature reached 32.2 °C, humidity dropped to 24 % and gusts hit 49 km/h. The fire danger index (FWI) reached 45, class Very high.
Where does this data come from?
From the GWIS (Copernicus) burnt perimeter, NASA FIRMS VIIRS hotspots and the administrative boundaries of Chile (geoBoundaries). It is not an official report.
How did the fires that started in similar weather in this area end?
Fires less than 250 km away that started since 2016 with a similar FWI, humidity and dry spell: 20. Their median duration was 4 days and their median area 1,447 ha; 100 % went past 1,000 ha. Only 5 of its 20 twins burned more. The weather on the first day does not explain everything: the wind in the following days, the fuel and the firefighting also count. In 9 of 20, not even 1 mm fell in the ten days after the end: they went out without rain. In the rest, the first rainy day brought a median of 6.0 mm.

Where to verify it

A satellite detection is not an official report. Final figures and the fire’s status are published by each country’s emergency service.

Emergency number: 130 (CONAF) · 132 · Emergency number and official warnings

Satellite cross-check

History of this page Changes in area, dates, name, official record or merged pages, compared every night since 24 October 2026.

Does something look wrong on this page?

This page is built from satellite data and official records, and it sometimes gets things wrong: the wrong dates, the wrong town, two fires merged into one, or something that was not a wildfire at all. If you know this fire first-hand (you live nearby, saw it, fought it or reported on it), tell us what really happened and we will check it.

Report an error
What do you think is wrong?

We will only use your email to reply about this report. Privacy. This is not an emergency service: if there is a fire now, call 130 (CONAF) · 132.

How we know this
  • Perimeter: GWIS (Copernicus), rebuilt from heat detections rather than mapped on imagery.
  • Dates adjusted with the VIIRS detections inside the perimeter, which said 4 February 2023 to 9 February 2023. 172 Suomi-NPP VIIRS detections on those dates.
  • We have not matched this page with any official record.
  • Weather: Copernicus ERA5 reanalysis at the fire location, in cells of about 25 km.
  • Built-up area and population come from the JRC Global Human Settlement Layer (epoch 2025, 100 m cells), summed inside the perimeter: an estimate of what was there, not a damage count.

How we build fire pages: methodology

Where this data comes from

The perimeter comes from the Copernicus Global Wildfire Information System (GWIS), which rebuilds it from MODIS and VIIRS heat detections and publishes it under CC BY 4.0. It is not measured on imagery as in Europe, so it is an estimate. Heat detections come from the VIIRS sensors aboard Suomi-NPP and NOAA-20, distributed by NASA FIRMS at 375 m resolution. Municipal boundaries come from geoBoundaries ADM3 (Creative Commons Attribution 3.0 Intergovernmental Organisations (CC BY 3.0 IGO)). The area per municipality is computed by WorldFires by crossing the perimeter with those boundaries, so it may differ from each country’s official figure.