Skip to content
worldfires
BR · Brazil · –

Lagoa da Confusão fire, 26 July 2016 Lagoa da Confusão, Pium

Out · last detection 31 Jul 2016, 17:15 UTC

The fire started on 26 July 2016 in Lagoa da Confusão, Brazil, and satellites saw it burning for 6 days. Copernicus’s global GWIS system rebuilt a burnt perimeter of 5,623 hectares from heat detections, spread across 2 municipalities.

It is the 426th largest in Tocantins since 2016 (of 1036 with a page). Number 228 in Brazil in 2016, of 648.

Burnt area
5,623ha
GWIS perimeter (Copernicus)
Duration
6days
26 Jul 2016 – 31 Jul 2016
Municipalities hit
2
municipalities
Started on
26 Jul
2016
Heat detections
181
in a single hotspot: 50 MW
Danger at start
62
Extreme · FWI index
Average daily power
309MW
detected power per day, on average

Where it burned

HOTSPOTS BY DAY 26 Jul31 Jul
31 Jul 2016

How it evolved, day by day

26 Jul 2016 · 411 MW · 23 27 Jul 2016 · 215 MW · 24 28 Jul 2016 · 427 MW · 53 29 Jul 2016 · 179 MW · 25 30 Jul 2016 · 615 MW · 55 31 Jul 2016 · 5 MW · 1
26 Jul 28 Jul 30 Jul

Fire radiative power detected each day, in megawatts, and number of hotspots. The magenta bar marks the peak day.

The weather it burned in

38°high
48km/h · peak gust
17%lowest humidity

It had gone 45 days without rain (1 mm or more) when it started.

This area had burned before

No earlier perimeters overlap this fire since 2016, when the satellite record begins.

How big is it?

10 km
It burned the equivalent of 3.6% of the area of London (56 km² against 1,583 km²).

London boundary: geoBoundaries · Office for National Statistics (Open Government Licence v3.0).

This compares size, not location: both shapes are at the same scale, north up, centred on each other.

What happened to each town

  1. Lagoa da Confusão 15,288 inhabitants where it started
    5,621 ha reached on 26 Jul
    0.5 %
  2. Pium 7,128 inhabitants
    31 ha reached on 31 Jul
    0.0 %

Burnt area inside each municipality, from crossing the GWIS perimeter with administrative boundaries. The distance runs from the point marking the centre of each area to the nearest fire: staying a kilometre away does not mean it reached the houses.

People and buildings inside the perimeter

GHSL 2015
Built-up area< 0.1 ha
Residents< 20

Inside the perimeter there was no noticeable built-up land and almost nobody lived there (GHSL 2015, satellite-based estimate).

This is an estimate on 100 m cells, made from satellite imagery and census data: it does not mean that homes burned or that anyone was harmed. The perimeter also contains land that never burned.

Source: Global Human Settlement Layer (GHS-BUILT-S and GHS-POP R2023A), European Commission Joint Research Centre (JRC), © European Union, CC BY 4.0. Sum inside the perimeter computed by WorldFires. human-settlement.emergency.copernicus.eu

The weather day by day

ECMWF ERA5 reanalysis at the fire location, the standard reference for past weather, and the Canadian Fire Weather Index (the same system Copernicus uses), computed by WorldFires from that data. Days after the fire run until the first rain.

Open-Meteo.com (CC BY 4.0) · Copernicus Climate Change Service (ERA5)

Started with Extreme FWI: 46 % of the area in Brazil

Day High Min. humidity Peak gust Rain Danger (FWI)
26 Jul 36.1 °C 21 % 34 km/h 0.0 mm Extreme 62
27 Jul 35.6 °C 22 % 31 km/h 0.0 mm Very high 49
28 Jul 36.2 °C 18 % 34 km/h 0.0 mm Extreme 58
29 Jul 37.5 °C 17 % 33 km/h 0.0 mm Extreme 62
30 Jul 36.0 °C 21 % 48 km/h 0.0 mm Very extreme 77
31 Jul 34.6 °C 23 % 44 km/h 0.0 mm Very extreme 70
1 Aug after 35.6 °C 24 % 38 km/h 0.0 mm Extreme 61
2 Aug after 35.8 °C 21 % 35 km/h 0.0 mm Extreme 61
3 Aug after 37.1 °C 20 % 32 km/h 0.0 mm Extreme 59
4 Aug after 37.8 °C 19 % 34 km/h 0.0 mm Extreme 60
5 Aug after 37.4 °C 19 % 41 km/h 0.0 mm Extreme 69
6 Aug after 36.7 °C 19 % 33 km/h 0.0 mm Extreme 58
7 Aug after 37.8 °C 19 % 30 km/h 0.0 mm Extreme 56
8 Aug after 38.6 °C 15 % 31 km/h 0.0 mm Extreme 59
9 Aug after 38.5 °C 17 % 27 km/h 0.0 mm Extreme 55
10 Aug after 39.4 °C 12 % 19 km/h 0.0 mm Extreme 50

Its twins: fires that started in the same weather

It started with an FWI of 61.5, a minimum humidity of 21% and 45 days without rain. Fires in the area that started in weather like this since 2016: 93.

FWI at the start 61.5
Minimum humidity 21 %
Days without rain 45
this fire chosen twins rest of the area
Almost identicalSimilar

Outlines of the closest twins

Luciara fire, August 2019
7,863 ha 21 days FWI 62.8 Min. humidity 21 % 19 km away, in 2019

First rain (1 mm or more) after it ended: none in the following ten days.

What happened to them

9 days
median duration
5,299 ha
median area
26 %
went past 10,000 ha
2.6 mm
rain at the end (median; 49 of 93 had it)

It burned an area similar to its twins (5,623 ha against a median of 5,299 ha) and lasted 6 days, against 9 days.

In 44 of 93, not even 1 mm fell in the ten days after the end: they went out without rain. In the rest, the first rainy day brought a median of 2.6 mm.

This is a bank of analogues: it shows what usually happens, not what will happen. With fewer than 15 twins we give no figures. How we calculate it

How it ended

—first rain
—no rain in ten days
48km/h · max. gust

It was considered over on 31 Jul, and not even 1 mm fell in the following ten days: it went out without rain. Twins with rain when they ended: 49 of 93, with a median of 2.6 mm.

Weather on this page: Open-Meteo.com (CC BY 4.0) · Copernicus Climate Change Service (ERA5)

How a twin is chosen

  • Same area: fires that have already ended, less than 250 km from this one, since 2016.
  • Same start: we compare the FWI on the first day, the minimum humidity that day and the run of days without rain before it. The slider sets how much they may differ.
  • Only pages with final weather data (ERA5 reanalysis) calculated in the same way as this fire’s; agricultural and grass burns and pages with data under review are left out.
  • Fires burning at the same time as this one (a week before or after) are left out: they share the same spell of weather and do not count as a precedent.
  • They are sorted by similarity, and the outlines of the first five are drawn.

How we calculate it

Before and after, from space

Drag the line to compare the same ground before the fire and after it.

Before · 19 Jul 2016
After · 7 Aug 2016

If the day is cloudy, change the date: each satellite passes once a day. In false colour the burnt ground looks brown or red.

Detections table · 181Every satellite heat detection, one by one, with time, satellite, power and coordinates.
⬇ Download CSV Times in UTC. Each detection is a 375 m pixel: a large fire yields hundreds per pass.
Date and timeSatelliteFRP (MW)LatLon

Other fires nearby

All fires in Brazil

Frequently asked questions

How long did the Lagoa da Confusão fire last?
According to the heat detections seen by satellite inside the perimeter, it burned from 26 July 2016 to 31 July 2016 (6 days). The perimeter dates it from 26 July 2016 to 30 July 2016.
How much area did it burn?
The perimeter GWIS (Copernicus) rebuilt from heat detections is 5,623 hectares (56.2 km²). It is an estimate: official national figures may differ.
Which municipalities burned?
The fire entered 2 municipalities: Lagoa da Confusão (5,621 ha, 0.5 %); Pium (31 ha, 0.0 %).
What was the weather like?
During the fire the temperature reached 37.5 °C, humidity dropped to 17 % and gusts hit 48 km/h. The fire danger index (FWI) reached 77, class Very extreme.
Where does this data come from?
From the GWIS (Copernicus) burnt perimeter, NASA FIRMS VIIRS hotspots and the administrative boundaries of Brazil (geoBoundaries). It is not an official report.
How did the fires that started in similar weather in this area end?
Fires less than 250 km away that started since 2016 with a similar FWI, humidity and dry spell: 93. Their median duration was 9 days and their median area 5,299 ha; 26 % went past 10,000 ha. In 44 of 93, not even 1 mm fell in the ten days after the end: they went out without rain. In the rest, the first rainy day brought a median of 2.6 mm.

Where to verify it

A satellite detection is not an official report. Final figures and the fire’s status are published by each country’s emergency service.

Emergency number: 193 · Emergency number and official warnings

Satellite cross-check

History of this page · 1 Changes in area, dates, name, official record or merged pages, compared every night since 24 October 2026.
  1. Last day with fire: 30 July 2016 → 31 July 2016.

RSS Changes to this page With cross-checks and a citable version

Does something look wrong on this page?

This page is built from satellite data and official records, and it sometimes gets things wrong: the wrong dates, the wrong town, two fires merged into one, or something that was not a wildfire at all. If you know this fire first-hand (you live nearby, saw it, fought it or reported on it), tell us what really happened and we will check it.

Report an error
What do you think is wrong?

We will only use your email to reply about this report. Privacy. This is not an emergency service: if there is a fire now, call 193.

How we know this
  • Perimeter: GWIS (Copernicus), rebuilt from heat detections rather than mapped on imagery.
  • Dates adjusted with the VIIRS detections inside the perimeter, which said 26 July 2016 to 30 July 2016. 181 Suomi-NPP VIIRS detections on those dates.
  • We have not matched this page with any official record.
  • Weather: Copernicus ERA5 reanalysis at the fire location, in cells of about 25 km.
  • Built-up area and population come from the JRC Global Human Settlement Layer (epoch 2015, 100 m cells), summed inside the perimeter: an estimate of what was there, not a damage count.

How we build fire pages: methodology

Where this data comes from

The perimeter comes from the Copernicus Global Wildfire Information System (GWIS), which rebuilds it from MODIS and VIIRS heat detections and publishes it under CC BY 4.0. It is not measured on imagery as in Europe, so it is an estimate. Heat detections come from the VIIRS sensors aboard Suomi-NPP and NOAA-20, distributed by NASA FIRMS at 375 m resolution. Municipal boundaries come from geoBoundaries ADM2 (Creative Commons Attribution 3.0 Intergovernmental Organisations (CC BY 3.0 IGO)). The area per municipality is computed by WorldFires by crossing the perimeter with those boundaries, so it may differ from each country’s official figure.