Lafon fire, 20 January 2017 Lafon, Kapoeta North
The fire started on 20 January 2017 in Lafon, South Sudan, and satellites saw it burning for 4 days. Copernicus’s global GWIS system rebuilt a burnt perimeter of 17,526 hectares from heat detections, spread across 2 municipalities.
It is the 12th largest in Eastern Equatoria since 2016 (of 80 with a page). Number 24 in South Sudan in 2017, of 203.
Compare with…
Suggestions: Lafon · 2021Pibor · 2021Lafon · 2026Lafon · 2021
- Burnt area
- 17,526ha
- GWIS perimeter (Copernicus)
- Duration
- 4days
- 20 Jan 2017 – 23 Jan 2017
- Municipalities hit
- 2
- counties
- Started on
- 20 Jan
- 2017
- Heat detections
- 414
- in a single hotspot: 104 MW
- Danger at start
- 78
- Very extreme · FWI index
- Average daily power
- 753MW
- detected power per day, on average
Where it burned
How it evolved, day by day
Fire radiative power detected each day, in megawatts, and number of hotspots. The magenta bar marks the peak day.
The weather it burned in
It had gone 56 days without rain (1 mm or more) when it started.
This area had burned before
18% of the perimeter overlaps earlier fires recorded since 2016: 3,085 ha in 2016.
How big is it?
London boundary: geoBoundaries · Office for National Statistics (Open Government Licence v3.0).
Paris boundary: geoBoundaries · Institut national de l'information géographique et forestière (IGN-F) (Etalab Open License 2.0).
Madrid boundary: geoBoundaries · Open Data ESRI, IGN Central Registry of Cartography Area (CC BY 4.0).
Berlin boundary: geoBoundaries · Federal Agency for Cartography and Geodesy (dl-de/by-2-0).
This compares size, not location: both shapes are at the same scale, north up, centred on each other.
What happened to each town
-
Lafon where it started14,857 ha reached on 20 Jan0.9 %
-
2,796 ha reached on 20 Jan0.5 %
Burnt area inside each municipality, from crossing the GWIS perimeter with administrative boundaries. The distance runs from the point marking the centre of each area to the nearest fire: staying a kilometre away does not mean it reached the houses.
People and buildings inside the perimeter
GHSL 2015Inside the perimeter there were about 0.12 hectares of built-up land and about 2,300 residents (GHSL 2015, satellite-based estimate).
This is an estimate on 100 m cells, made from satellite imagery and census data: it does not mean that homes burned or that anyone was harmed. The perimeter also contains land that never burned.
Source: Global Human Settlement Layer (GHS-BUILT-S and GHS-POP R2023A), European Commission Joint Research Centre (JRC), © European Union, CC BY 4.0. Sum inside the perimeter computed by WorldFires. human-settlement.emergency.copernicus.eu
The weather day by day
ECMWF ERA5 reanalysis at the fire location, the standard reference for past weather, and the Canadian Fire Weather Index (the same system Copernicus uses), computed by WorldFires from that data. Days after the fire run until the first rain.
Open-Meteo.com (CC BY 4.0) · Copernicus Climate Change Service (ERA5)
| Day | High | Min. humidity | Peak gust | Rain | Danger (FWI) |
|---|---|---|---|---|---|
| 20 Jan | 39.8 °C | 15 % | 57 km/h | 0.0 mm | Very extreme 78 |
| 21 Jan | 39.5 °C | 16 % | 56 km/h | 0.0 mm | Very extreme 76 |
| 22 Jan | 40.1 °C | 16 % | 65 km/h | 0.0 mm | Very extreme 86 |
| 23 Jan | 40.0 °C | 16 % | 67 km/h | 0.0 mm | Very extreme 88 |
| 24 Jan after | 39.8 °C | 16 % | 63 km/h | 0.0 mm | Very extreme 83 |
| 25 Jan after | 39.6 °C | 15 % | 59 km/h | 0.0 mm | Very extreme 81 |
| 26 Jan after | 39.6 °C | 16 % | 63 km/h | 0.0 mm | Very extreme 84 |
| 27 Jan after | 40.1 °C | 17 % | 49 km/h | 0.0 mm | Extreme 69 |
| 28 Jan after | 39.7 °C | 18 % | 32 km/h | 0.0 mm | Extreme 52 |
| 29 Jan after | 38.4 °C | 22 % | 26 km/h | 0.0 mm | Very high 44 |
| 30 Jan after | 37.7 °C | 25 % | 36 km/h | 0.0 mm | Very high 48 |
| 31 Jan after | 37.8 °C | 24 % | 35 km/h | 0.0 mm | Extreme 50 |
| 1 Feb after | 39.0 °C | 25 % | 34 km/h | 0.0 mm | Very high 45 |
| 2 Feb after | 38.2 °C | 15 % | 42 km/h | 0.0 mm | Extreme 53 |
Before and after, from space
Drag the line to compare the same ground before the fire and after it.
If the day is cloudy, change the date: each satellite passes once a day. In false colour the burnt ground looks brown or red.
Detections table · 414Every satellite heat detection, one by one, with time, satellite, power and coordinates.
| Date and time | Satellite | FRP (MW) | Lat | Lon |
|---|
Other fires nearby
- 17,639 haLafon11 December 2021 · 5 days · 3 km away
- 20,248 haPibor2 February 2021 · 5 days · 27 km away
- 28,122 haLafon28 January 2026 · 4 days · 31 km away
- 55,315 haLafon1 February 2021 · 12 days · 34 km away
- 39,702 haLafon16 January 2026 · 12 days · 39 km away
- 18,463 haKapoeta North17 January 2017 · 14 days · 40 km away
Frequently asked questions
- How long did the Lafon fire last?
- GWIS (Copernicus) dates it between 20 January 2017 and 23 January 2017: 4 days between the first and last heat detection of the perimeter.
- How much area did it burn?
- The perimeter GWIS (Copernicus) rebuilt from heat detections is 17,526 hectares (175.3 km²). It is an estimate: official national figures may differ.
- Which municipalities burned?
- The fire entered 2 municipalities: Lafon (14,857 ha, 0.9 %); Kapoeta North (2,796 ha, 0.5 %).
- What was the weather like?
- During the fire the temperature reached 40.1 °C, humidity dropped to 15 % and gusts hit 67 km/h. The fire danger index (FWI) reached 88, class Very extreme.
- Where does this data come from?
- From the GWIS (Copernicus) burnt perimeter, NASA FIRMS VIIRS hotspots and the administrative boundaries of South Sudan (geoBoundaries). It is not an official report.
Where to verify it
A satellite detection is not an official report. Final figures and the fire’s status are published by each country’s emergency service.
Satellite cross-check
History of this page Changes in area, dates, name, official record or merged pages, compared every night since 24 October 2026.
No changes since 24 October 2026.
Does something look wrong on this page?
This page is built from satellite data and official records, and it sometimes gets things wrong: the wrong dates, the wrong town, two fires merged into one, or something that was not a wildfire at all. If you know this fire first-hand (you live nearby, saw it, fought it or reported on it), tell us what really happened and we will check it.
Report an error
How we know this
- Perimeter: GWIS (Copernicus), rebuilt from heat detections rather than mapped on imagery; 2 polygons grouped in this page.
- Dates from the perimeter: the VIIRS detections inside it did not change them. 414 Suomi-NPP VIIRS detections on those dates.
- We have not matched this page with any official record.
- Weather: Copernicus ERA5 reanalysis at the fire location, in cells of about 25 km.
- Built-up area and population come from the JRC Global Human Settlement Layer (epoch 2015, 100 m cells), summed inside the perimeter: an estimate of what was there, not a damage count.
Where this data comes from
The perimeter comes from the Copernicus Global Wildfire Information System (GWIS), which rebuilds it from MODIS and VIIRS heat detections and publishes it under CC BY 4.0. It is not measured on imagery as in Europe, so it is an estimate. Heat detections come from the VIIRS sensors aboard Suomi-NPP and NOAA-20, distributed by NASA FIRMS at 375 m resolution. Municipal boundaries come from geoBoundaries ADM2 (Creative Commons Attribution 3.0 Intergovernmental Organisations (CC BY 3.0 IGO)). The area per municipality is computed by WorldFires by crossing the perimeter with those boundaries, so it may differ from each country’s official figure.