Skip to content
worldfires
GT · Guatemala · –

La Democracia fire, January 2024 La Democracia, San José

Out · last detection 2 Feb 2024, 07:43 UTC

The fire started on 29 January 2024 in La Democracia, Guatemala, and satellites saw it burning for 5 days. Copernicus’s global GWIS system rebuilt a burnt perimeter of 1,368 hectares from heat detections, spread across 2 municipalities.

It is the 5th largest in Escuintla since 2016 (of 10 with a page). Number 41 in Guatemala in 2024, of 70.

The power measured by the satellite is low (29.4 MW in the strongest hotspot), more typical of grass or stubble burning, or a slow surface fire, than of a large crown fire.

Burnt area
1,368ha
GWIS perimeter (Copernicus)
Duration
5days
29 Jan 2024 – 2 Feb 2024
Municipalities hit
2
municipalities
Started on
29 Jan
2024
Heat detections
29
in a single hotspot: 29 MW
Danger at start
23
High · FWI index
Average daily power
79MW
detected power per day, on average

Where it burned

HOTSPOTS BY DAY 29 Jan2 Feb
2 Feb 2024

How it evolved, day by day

29 Jan 2024 · 21 MW · 3 31 Jan 2024 · 3 MW · 1 1 Feb 2024 · 248 MW · 17 2 Feb 2024 · 44 MW · 8
29 Jan 31 Jan 1 Feb 2 Feb

Fire radiative power detected each day, in megawatts, and number of hotspots. The magenta bar marks the peak day.

The weather it burned in

30°high
33km/h · peak gust
49%lowest humidity

It had gone 42 days without rain (1 mm or more) when it started. Rain came after the fire: 1.0 mm on 3 Feb.

This area had burned before

No earlier perimeters overlap this fire since 2016, when the satellite record begins.

How big is it?

10 km
It burned the equivalent of 0.9% of the area of London (14 km² against 1,583 km²).

London boundary: geoBoundaries · Office for National Statistics (Open Government Licence v3.0).

This compares size, not location: both shapes are at the same scale, north up, centred on each other.

What happened to each town

  1. La Democracia 22,884 inhabitants where it started
    1,332 ha reached on 29 Jan
    4.6 %
  2. 44 ha
    0.2 %

Burnt area inside each municipality, from crossing the GWIS perimeter with administrative boundaries. The distance runs from the point marking the centre of each area to the nearest fire: staying a kilometre away does not mean it reached the houses.

People and buildings inside the perimeter

GHSL 2025
Built-up area1.3 ha
Residents≈ 50

Inside the perimeter there were about 1.3 hectares of built-up land and about 50 residents (GHSL 2025, satellite-based estimate).

This is an estimate on 100 m cells, made from satellite imagery and census data: it does not mean that homes burned or that anyone was harmed. The perimeter also contains land that never burned. The GHSL 2025 epoch is a projection made from 2020 and earlier data.

Source: Global Human Settlement Layer (GHS-BUILT-S and GHS-POP R2023A), European Commission Joint Research Centre (JRC), © European Union, CC BY 4.0. Sum inside the perimeter computed by WorldFires. human-settlement.emergency.copernicus.eu

The weather day by day

ECMWF ERA5 reanalysis at the fire location, the standard reference for past weather, and the Canadian Fire Weather Index (the same system Copernicus uses), computed by WorldFires from that data. Days after the fire run until the first rain.

Open-Meteo.com (CC BY 4.0) · Copernicus Climate Change Service (ERA5)

Day High Min. humidity Peak gust Rain Danger (FWI)
29 Jan 30.3 °C 64 % 33 km/h 1.6 mm High 23
30 Jan 29.8 °C 49 % 29 km/h 0.0 mm High 22
31 Jan 30.2 °C 51 % 29 km/h 0.4 mm High 26
1 Feb 30.0 °C 49 % 28 km/h 0.0 mm High 26
2 Feb 30.0 °C 52 % 25 km/h 0.0 mm High 27
3 Feb after 30.1 °C 59 % 45 km/h 1.0 mm High 25

Its twins: fires that started in the same weather

It started with an FWI of 22.7, a minimum humidity of 64% and 42 days without rain. Fires in the area that started in weather like this since 2016: 1.

FWI at the start 22.7
Minimum humidity 64 %
Days without rain 42
this fire chosen twins rest of the area
Almost identicalSimilar

Outlines of the closest twins

Sipacate fire, March 2021
1,099 ha 2 days FWI 23.8 Min. humidity 59 % 31 km away, in 2021

First rain (1 mm or more) after it ended: none in the following ten days.

What happened to them

Fires in the area that started in similar weather: 1. With fewer than 15 we give no figures: they would be more noise than signal.

This is a bank of analogues: it shows what usually happens, not what will happen. With fewer than 15 twins we give no figures. How we calculate it

How it ended

1.0 mmfirst rain
3 Febthe day after it ended
33km/h · max. gust

It was considered over on 2 Feb, and on 3 Feb 1.0 mm fell. We do not know whether the rain or the firefighters put it out.

Weather on this page: Open-Meteo.com (CC BY 4.0) · Copernicus Climate Change Service (ERA5)

How a twin is chosen

  • Same area: fires that have already ended, less than 250 km from this one, since 2016.
  • Same start: we compare the FWI on the first day, the minimum humidity that day and the run of days without rain before it. The slider sets how much they may differ.
  • Only pages with final weather data (ERA5 reanalysis) calculated in the same way as this fire’s; agricultural and grass burns and pages with data under review are left out.
  • Fires burning at the same time as this one (a week before or after) are left out: they share the same spell of weather and do not count as a precedent.
  • They are sorted by similarity, and the outlines of the first five are drawn.

How we calculate it

Before and after, from space

Drag the line to compare the same ground before the fire and after it.

Before · 22 Jan 2024
After · 9 Feb 2024

If the day is cloudy, change the date: each satellite passes once a day. In false colour the burnt ground looks brown or red.

The smoke

CAMS · Copernicus

On 27 January 2024 the air beside the fire reached 26 µg/m³ of PM2.5. That day averaged 21: 1.4 times the WHO daily guideline (15).

PM2.5 peak26 µg/m³
Days over the guideline3 days
PM1039 µg/m³
Optical depth0.62
27 Jan29 Jan31 Jan2 Feb4 Feb
Good Fair Moderate Poor Very poor Extremely poor

Particles from the Copernicus CAMS model at the centre of the perimeter; these are not measurements in each town. The pale bar is the worst hour, the solid one the daily average.

Open-Meteo.com (CC BY 4.0) · Copernicus Atmosphere Monitoring Service (CAMS)

Detections table · 29Every satellite heat detection, one by one, with time, satellite, power and coordinates.
⬇ Download CSV Times in UTC. Each detection is a 375 m pixel: a large fire yields hundreds per pass.
Date and timeSatelliteFRP (MW)LatLon

Other fires nearby

All fires in Guatemala

Frequently asked questions

How long did the La Democracia fire last?
GWIS (Copernicus) dates it between 29 January 2024 and 2 February 2024: 5 days between the first and last heat detection of the perimeter.
How much area did it burn?
The perimeter GWIS (Copernicus) rebuilt from heat detections is 1,368 hectares (13.7 km²). It is an estimate: official national figures may differ.
Which municipalities burned?
The fire entered 2 municipalities: La Democracia (1,332 ha, 4.6 %); San José (44 ha, 0.2 %).
What was the weather like?
During the fire the temperature reached 30.3 °C, humidity dropped to 49 % and gusts hit 33 km/h. The fire danger index (FWI) reached 27, class High.
Where does this data come from?
From the GWIS (Copernicus) burnt perimeter, NASA FIRMS VIIRS hotspots and the administrative boundaries of Guatemala (geoBoundaries). It is not an official report.

Where to verify it

A satellite detection is not an official report. Final figures and the fire’s status are published by each country’s emergency service.

Emergency number: 122 · 123 · 1566 · Emergency number and official warnings

Satellite cross-check

History of this page Changes in area, dates, name, official record or merged pages, compared every night since 24 October 2026.

Does something look wrong on this page?

This page is built from satellite data and official records, and it sometimes gets things wrong: the wrong dates, the wrong town, two fires merged into one, or something that was not a wildfire at all. If you know this fire first-hand (you live nearby, saw it, fought it or reported on it), tell us what really happened and we will check it.

Report an error
What do you think is wrong?

We will only use your email to reply about this report. Privacy. This is not an emergency service: if there is a fire now, call 122 · 123 · 1566.

How we know this
  • Perimeter: GWIS (Copernicus), rebuilt from heat detections rather than mapped on imagery.
  • Dates from the perimeter: the VIIRS detections inside it did not change them. 29 Suomi-NPP VIIRS detections on those dates.
  • We have not matched this page with any official record.
  • Weather: Copernicus ERA5 reanalysis at the fire location, in cells of about 25 km.
  • Built-up area and population come from the JRC Global Human Settlement Layer (epoch 2025, 100 m cells), summed inside the perimeter: an estimate of what was there, not a damage count.

How we build fire pages: methodology

Where this data comes from

The perimeter comes from the Copernicus Global Wildfire Information System (GWIS), which rebuilds it from MODIS and VIIRS heat detections and publishes it under CC BY 4.0. It is not measured on imagery as in Europe, so it is an estimate. Heat detections come from the VIIRS sensors aboard Suomi-NPP and NOAA-20, distributed by NASA FIRMS at 375 m resolution. Municipal boundaries come from geoBoundaries ADM2 (Creative Commons Attribution 3.0 Intergovernmental Organisations (CC BY 3.0 IGO)). The area per municipality is computed by WorldFires by crossing the perimeter with those boundaries, so it may differ from each country’s official figure.