Burned area
satellite only2,103ha
Perimeter published by GWIS (Copernicus).
- Source
- GWIS (Copernicus)
- Date
- 5 Jan 2019 – 9 Jan 2019
+− cross-check
No official record is matched to this page to compare it with.
GH · Ghana · –
Krachi East fire, January 2019 Krachi East
Out · last detection 9 Jan 2019, 13:32 UTC
The fire started on 5 January 2019 in Krachi East, Ghana, and satellites saw it burning for 5 days. Copernicus’s global GWIS system rebuilt a burnt perimeter of 2,103 hectares from heat detections, spread across a single municipality.
It is the 28th largest in Oti since 2016 (of 37 with a page). Number 112 in Ghana in 2019, of 127.
Use this data
Compare with…
Use this data
Fire page data · version 2026-10-24matches the official recordwith caveatssatellite onlymodel
When copying, the sentence is
Tick the figures you want: they make up the lede and the CSV.
Duration by satellite
satellite only5days
5 Jan 2019 to 9 Jan 2019: first and last day with fire on the page.
- Source
- GWIS (Copernicus) · NASA FIRMS · VIIRS
- Date
- last detection: 9 Jan 2019, 13:32 UTC
+− cross-check
Satellites pass a few times a day and cloud or smoke can hide the fire: a lack of detections is not an official extinction. Each country’s emergency service declares a fire contained or out.
Start
satellite only5 Jan 2019
First day with fire seen by the satellites or the perimeter.
- Source
- GWIS (Copernicus) · NASA FIRMS · VIIRS
- Date
- 5 Jan 2019
+− cross-check
No official record is matched to this page, so the alert time and the cause are not known here.
The worst day
satellite only143MW
Total radiative power on 5 January 2019; hotspots that day: 6.
- Source
- NASA FIRMS · VIIRS (FRP)
- Date
- 5 Jan 2019
+− cross-check
Fire radiative power (FRP) measures the energy the fire gives off when the satellite passes. Added up by day, it compares intensity, not area.
Danger at the start
model30.1FWI · high
Fire Weather Index (Canadian system) computed by WorldFires for the day the fire started. Consecutive days without rain before: 47.
- Source
- WorldFires calculation (Canadian FWI system)
- Date
- 5 Jan 2019, local noon
- Model
- ERA5 0,25° (ECMWF · Copernicus C3S) · Open-Meteo.com
+− cross-check
This is an index computed from weather model data, not a measurement of the fire nor an official warning. Danger warnings are issued by each country’s authority. Emergency number and official warnings
Weather during the fire
model32.8°C · 34% RH
High of 32.8 °C and minimum humidity of 34% on 8 January 2019; gusts of 26 km/h on 5 January 2019.
- Source
- weather model at the fire’s grid cell
- Date
- 5 Jan 2019 – 9 Jan 2019
- Model
- ERA5 0,25° (ECMWF · Copernicus C3S) · Open-Meteo.com
+− cross-check
These are model values for a cell of about 25 km, not from a weather station: they may differ from what was measured on the ground.
Living inside
model≈ 2,700people
Estimated residents inside the perimeter and 4.1 ha of built-up area (100 m grid, epoch 2020).
- Source
- GHSL R2023A · JRC
- Date
- calculated on 24 October 2026
+− cross-check
This is an estimate on 100 m cells, made from satellite imagery and census data: it does not mean that homes burned or that anyone was harmed. The perimeter also contains land that never burned.
This page’s change log has been kept since 24 October 2026: every night what it publishes is compared and the difference is logged. Anything earlier is reconstructed from each source’s date and marked as reconstructed.
Show
-
· reconstructed weatherWeather and FWI computed from the ERA5 reanalysis
-
· reconstructed GHSLPopulation and built-up area computed
What was saved on 24 October 2026
Every night a snapshot of what the page shows is saved. If anything changes, it appears in the list as a log entry.
- Area
- 2,103 ha
- Dates
- 5 Jan 2019 – 9 Jan 2019
- Name
- Krachi East
- Official record
- —
Versioned permanent link
https://worldfires.org/en/fire/krachi-east-2019-01?v=2026-10-24A version keeps the area, dates, name and official record; the area as it was logged (changes under 2% are not logged). The map, hotspots and weather always show today’s data.
Citation
A lede of about 60 words figures only, no adjectives
CSV for this fire krachi-east-2019-01.csv · daily, no individual hotspots
| fecha | focos_viirs | frp_mw | tmax_c | tmin_c | hr_min_pct | viento_max_kmh | racha_max_kmh | precip_mm | fwi | clase_fwi | dentro_del_incendio |
|---|---|---|---|---|---|---|---|---|---|---|---|
| 2019-01-05 | 6 | 143 | 32.6 | 24.7 | 26 | 12.1 | 25.9 | 0 | 30.1 | alto | 1 |
| 2019-01-06 | 0 | 0 | 30.9 | 25.2 | 40 | 11.6 | 25.9 | 0 | 27.8 | alto | 1 |
| 2019-01-07 | 21 | 105 | 30.3 | 24.1 | 52 | 9.7 | 15.1 | 0 | 21.8 | alto | 1 |
| 2019-01-08 | 3 | 31 | 32.8 | 25.6 | 34 | 9.4 | 20.2 | 0 | 25.2 | alto | 1 |
| 2019-01-09 | 8 | 143 | 31.2 | 25.5 | 37 | 10.2 | 20.9 | 0 | 26 | alto | 1 |
| 2019-01-10 | 0 | 0 | 32.4 | 25.8 | 55 | 11.2 | 22 | 0 | 22.4 | alto | 0 |
| 2019-01-11 | 0 | 0 | 31.9 | 26.2 | 56 | 10 | 22 | 0 | 20.9 | moderado | 0 |
| 2019-01-12 | 0 | 0 | 32.9 | 26.2 | 55 | 11.6 | 26.3 | 0 | 22 | alto | 0 |
| 2019-01-13 | 0 | 0 | 31.6 | 26.5 | 65 | 11.5 | 21.2 | 0 | 18.5 | moderado | 0 |
| 2019-01-14 | 0 | 0 | 34.2 | 25.5 | 36 | 13.1 | 25.9 | 0.2 | 27.6 | alto | 0 |
| 2019-01-15 | 0 | 0 | 32.6 | 26.2 | 49 | 9.8 | 20.2 | 0 | 24.3 | alto | 0 |
| 2019-01-16 | 0 | 0 | 33.1 | 27.2 | 55 | 10.3 | 22.3 | 0 | 22.5 | alto | 0 |
| 2019-01-17 | 0 | 0 | 32.9 | 25.4 | 55 | 17.5 | 33.8 | 0 | 26.9 | alto | 0 |
| 2019-01-18 | 0 | 0 | 32.2 | 26.1 | 62 | 15.8 | 32.8 | 0 | 22.6 | alto | 0 |
| 2019-01-19 | 0 | 0 | 31.7 | 25.8 | 60 | 14.5 | 30.6 | 0.5 | 22 | alto | 0 |
It is generated in your browser from this page’s data: one file per fire, aggregated by day and without individual hotspots.
Live widget for your story
It updates itself while the fire is still active and links to this page. Free, with the attribution shown at the bottom.
Sources for this page: GWIS (Copernicus), NASA FIRMS (VIIRS), ERA5 (ECMWF/Copernicus C3S) · Open-Meteo.com (CC BY 4.0), GHSL (JRC). Open-Meteo.com · How we build fire pages: methodology
- Burnt area
- 2,103ha
- GWIS perimeter (Copernicus)
- Duration
- 5days
- 5 Jan 2019 – 9 Jan 2019
- Municipalities hit
- 1
- districts
- Started on
- 5 Jan
- 2019
- Heat detections
- 38
- in a single hotspot: 0 MW
- Danger at start
- 30
- High · FWI index
- Average daily power
- 105MW
- detected power per day, on average
Where it burned
HOTSPOTS BY DAY
5 Jan9 Jan
9 Jan 2019
How it evolved, day by day
5 Jan
7 Jan
8 Jan
9 Jan
Fire radiative power detected each day, in megawatts, and number of hotspots. The magenta bar marks the peak day.
The weather it burned in
33°high
26km/h · peak gust
26%lowest humidity
It had gone 47 days without rain (1 mm or more) when it started.
This area had burned before
17% of the perimeter overlaps earlier fires recorded since 2016: 367 ha in 2016.
How big is it?
London boundary: geoBoundaries · Office for National Statistics (Open Government Licence v3.0).
Paris boundary: geoBoundaries · Institut national de l'information géographique et forestière (IGN-F) (Etalab Open License 2.0).
Madrid boundary: geoBoundaries · Open Data ESRI, IGN Central Registry of Cartography Area (CC BY 4.0).
Berlin boundary: geoBoundaries · Federal Agency for Cartography and Geodesy (dl-de/by-2-0).
This compares size, not location: both shapes are at the same scale, north up, centred on each other.
What happened to each town
-
Krachi East where it started2,116 ha0.8 %
Burnt area inside each municipality, from crossing the GWIS perimeter with administrative boundaries. The distance runs from the point marking the centre of each area to the nearest fire: staying a kilometre away does not mean it reached the houses.
People and buildings inside the perimeter
GHSL 2020Built-up area4.1 ha
Residents≈ 2,700
Inside the perimeter there were about 4.1 hectares of built-up land and about 2,700 residents (GHSL 2020, satellite-based estimate).
This is an estimate on 100 m cells, made from satellite imagery and census data: it does not mean that homes burned or that anyone was harmed. The perimeter also contains land that never burned.
Source: Global Human Settlement Layer (GHS-BUILT-S and GHS-POP R2023A), European Commission Joint Research Centre (JRC), © European Union, CC BY 4.0. Sum inside the perimeter computed by WorldFires. human-settlement.emergency.copernicus.eu
The weather day by day
ECMWF ERA5 reanalysis at the fire location, the standard reference for past weather, and the Canadian Fire Weather Index (the same system Copernicus uses), computed by WorldFires from that data. Days after the fire run until the first rain.
Open-Meteo.com (CC BY 4.0) · Copernicus Climate Change Service (ERA5)
| Day | High | Min. humidity | Peak gust | Rain | Danger (FWI) |
|---|---|---|---|---|---|
| 5 Jan | 32.6 °C | 26 % | 26 km/h | 0.0 mm | High 30 |
| 6 Jan | 30.9 °C | 40 % | 26 km/h | 0.0 mm | High 28 |
| 7 Jan | 30.3 °C | 52 % | 15 km/h | 0.0 mm | High 22 |
| 8 Jan | 32.8 °C | 34 % | 20 km/h | 0.0 mm | High 25 |
| 9 Jan | 31.2 °C | 37 % | 21 km/h | 0.0 mm | High 26 |
| 10 Jan after | 32.4 °C | 55 % | 22 km/h | 0.0 mm | High 22 |
| 11 Jan after | 31.9 °C | 56 % | 22 km/h | 0.0 mm | Moderate 21 |
| 12 Jan after | 32.9 °C | 55 % | 26 km/h | 0.0 mm | High 22 |
| 13 Jan after | 31.6 °C | 65 % | 21 km/h | 0.0 mm | Moderate 18 |
| 14 Jan after | 34.2 °C | 36 % | 26 km/h | 0.2 mm | High 28 |
| 15 Jan after | 32.6 °C | 49 % | 20 km/h | 0.0 mm | High 24 |
| 16 Jan after | 33.1 °C | 55 % | 22 km/h | 0.0 mm | High 22 |
| 17 Jan after | 32.9 °C | 55 % | 34 km/h | 0.0 mm | High 27 |
| 18 Jan after | 32.2 °C | 62 % | 33 km/h | 0.0 mm | High 23 |
| 19 Jan after | 31.7 °C | 60 % | 31 km/h | 0.5 mm | High 22 |
Its twins: fires that started in the same weather
It started with an FWI of 30.1, a minimum humidity of 26% and 47 days without rain. Fires in the area that started in weather like this since 2016: 36.
FWI at the start
30.1
Minimum humidity
26 %
Days without rain
47
this fire
chosen twins
rest of the area
Almost identicalSimilar
Outlines of the closest twins
This fire · Krachi East fire, January 2019
2,103 ha
5 days
FWI 30.1
Min. humidity 26 %
Nkwanta South fire, January 2024
2,793 ha
13 days
FWI 31.4
Min. humidity 28 %
78 km away, in 2024
First rain (1 mm or more) after it ended: none in the following ten days.
Nkwanta South fire, January 2016
4,513 ha
19 days
FWI 35.5
Min. humidity 26 %
78 km away, in 2016
First rain (1 mm or more) after it ended: none in the following ten days.
Sotouboua fire, November 2020
2,532 ha
13 days
FWI 30.2
Min. humidity 27 %
114 km away, in 2020
First rain (1 mm or more) after it ended: none in the following ten days.
Sotouboua fire, December 2020
1,101 ha
2 days
FWI 32.4
Min. humidity 24 %
148 km away, in 2020
First rain (1 mm or more) after it ended: none in the following ten days.
Sekyere Afram Plains North fire, January 2022
2,091 ha
20 days
FWI 34.1
Min. humidity 25 %
134 km away, in 2022
First rain (1 mm or more) after it ended: none in the following ten days.
What happened to them
- 15 days
- median duration
- 2,861 ha
- median area
- 100 %
- went past 1,000 ha
- 2.8 mm
- rain at the end (median; 3 of 36 had it)
It burned an area similar to its twins (2,103 ha against a median of 2,861 ha) and lasted 5 days, against 15 days.
In 33 of 36, not even 1 mm fell in the ten days after the end: they went out without rain. In the rest, the first rainy day brought a median of 2.8 mm.
This is a bank of analogues: it shows what usually happens, not what will happen. With fewer than 15 twins we give no figures. How we calculate it
How it ended
—first rain
—no rain in ten days
26km/h · max. gust
It was considered over on 9 Jan, and not even 1 mm fell in the following ten days: it went out without rain. Twins with rain when they ended: 3 of 36, with a median of 2.8 mm.
Weather on this page: Open-Meteo.com (CC BY 4.0) · Copernicus Climate Change Service (ERA5)
How a twin is chosen
- Same area: fires that have already ended, less than 250 km from this one, since 2016.
- Same start: we compare the FWI on the first day, the minimum humidity that day and the run of days without rain before it. The slider sets how much they may differ.
- Only pages with final weather data (ERA5 reanalysis) calculated in the same way as this fire’s; agricultural and grass burns and pages with data under review are left out.
- Fires burning at the same time as this one (a week before or after) are left out: they share the same spell of weather and do not count as a precedent.
- They are sorted by similarity, and the outlines of the first five are drawn.
Before and after, from space
Drag the line to compare the same ground before the fire and after it.
↔
Before · 29 Dec 2018
After · 16 Jan 2019
Sentinel-2 did not pass over on that day. Try another date, or use false colour, which is daily.
If the day is cloudy, change the date: each satellite passes once a day. In false colour the burnt ground looks brown or red.
Detections table · 0Every satellite heat detection, one by one, with time, satellite, power and coordinates.
⬇ Download CSV
Times in UTC. Each detection is a 375 m pixel: a large fire yields hundreds per pass.
| Date and time | Satellite | FRP (MW) | Lat | Lon |
|---|
Other fires nearby
Frequently asked questions
- How long did the Krachi East fire last?
- GWIS (Copernicus) dates it between 5 January 2019 and 9 January 2019: 5 days between the first and last heat detection of the perimeter.
- How much area did it burn?
- The perimeter GWIS (Copernicus) rebuilt from heat detections is 2,103 hectares (21.0 km²). It is an estimate: official national figures may differ.
- Which municipalities burned?
- The fire only entered Krachi East (2,116 ha, 0.8 %).
- What was the weather like?
- During the fire the temperature reached 32.8 °C, humidity dropped to 26 % and gusts hit 26 km/h. The fire danger index (FWI) reached 30, class High.
- Where does this data come from?
- From the GWIS (Copernicus) burnt perimeter, NASA FIRMS VIIRS hotspots and the administrative boundaries of Ghana (geoBoundaries). It is not an official report.
- How did the fires that started in similar weather in this area end?
- Fires less than 250 km away that started since 2016 with a similar FWI, humidity and dry spell: 36. Their median duration was 15 days and their median area 2,861 ha; 100 % went past 1,000 ha. In 33 of 36, not even 1 mm fell in the ten days after the end: they went out without rain. In the rest, the first rainy day brought a median of 2.8 mm.
Where to verify it
A satellite detection is not an official report. Final figures and the fire’s status are published by each country’s emergency service.
Emergency number: 112 · Emergency number and official warnings
Satellite cross-check
History of this page Changes in area, dates, name, official record or merged pages, compared every night since 24 October 2026.
No changes since 24 October 2026.
RSS Changes to this page With cross-checks and a citable version
Does something look wrong on this page?
This page is built from satellite data and official records, and it sometimes gets things wrong: the wrong dates, the wrong town, two fires merged into one, or something that was not a wildfire at all. If you know this fire first-hand (you live nearby, saw it, fought it or reported on it), tell us what really happened and we will check it.
Report an error
How we know this
- Perimeter: GWIS (Copernicus), rebuilt from heat detections rather than mapped on imagery.
- Dates from the perimeter: the VIIRS detections inside it did not change them. No Suomi-NPP VIIRS detections on those dates.
- We have not matched this page with any official record.
- Weather: Copernicus ERA5 reanalysis at the fire location, in cells of about 25 km.
- Built-up area and population come from the JRC Global Human Settlement Layer (epoch 2020, 100 m cells), summed inside the perimeter: an estimate of what was there, not a damage count.
Where this data comes from
The perimeter comes from the Copernicus Global Wildfire Information System (GWIS), which rebuilds it from MODIS and VIIRS heat detections and publishes it under CC BY 4.0. It is not measured on imagery as in Europe, so it is an estimate. Heat detections come from the VIIRS sensors aboard Suomi-NPP and NOAA-20, distributed by NASA FIRMS at 375 m resolution. Municipal boundaries come from geoBoundaries ADM2 (Creative Commons Attribution 4.0 International (CC BY 4.0)). The area per municipality is computed by WorldFires by crossing the perimeter with those boundaries, so it may differ from each country’s official figure.