Skip to content
worldfires
RU · Russia · –

Kezhemsky Rayon fire, 6 September 2016 Kezhemsky Rayon, Boguchansky Rayon

Out · last detection

The fire started on in Kezhemsky Rayon, Russia, and satellites saw it burning for 23 days. Copernicus’s global GWIS system rebuilt a burnt perimeter of 5,455 hectares from heat detections, spread across 2 municipalities.

It is number 313 by size of the 538 fires with a page that started in Krasnoyarsk Krai since 2016. Number 373 in Russia in 2016, of 692.

Burnt area
5,455ha
GWIS perimeter (Copernicus)
Duration
23days
6 Sept 2016 – 28 Sept 2016
Municipalities hit
2
districts
Started on
6 Sept
2016
Heat detections
1,051
in a single hotspot: 348 MW
Danger at start
24
High · FWI index
Average daily power
920MW
detected power per day, on average

Where it burned

HOTSPOTS BY DAY 6 Sept28 Sept
27 Sept 2016

How it evolved, day by day

6 Sept 2016 · 3,199 MW · 97 7 Sept 2016 · 4,157 MW · 91 8 Sept 2016 · 887 MW · 49 9 Sept 2016 · 95 MW · 17 10 Sept 2016 · 36 MW · 13 11 Sept 2016 · 64 MW · 14 12 Sept 2016 · 1 MW · 1 13 Sept 2016 · 7 MW · 3 14 Sept 2016 · 389 MW · 27 15 Sept 2016 · 422 MW · 35 16 Sept 2016 · 326 MW · 42 17 Sept 2016 · 2,128 MW · 76 18 Sept 2016 · 2,445 MW · 101 19 Sept 2016 · 2,707 MW · 66 20 Sept 2016 · 100 MW · 28 21 Sept 2016 · 136 MW · 36 22 Sept 2016 · 82 MW · 22 23 Sept 2016 · 172 MW · 16 24 Sept 2016 · 1,395 MW · 83 25 Sept 2016 · 668 MW · 89 26 Sept 2016 · 650 MW · 78 27 Sept 2016 · 181 MW · 67
7 Sept 11 Sept 16 Sept 21 Sept 26 Sept

Fire radiative power detected each day, in megawatts, and number of hotspots. The magenta bar marks the peak day.

The weather it burned in

22°high
41km/h · peak gust
26%lowest humidity

It had gone 8 days without rain (1 mm or more) when it started. Rain came after the fire: 3.4 mm on 29 Sept.

This area had burned before

No earlier perimeters overlap this fire since 2016, when the satellite record begins.

How big is it?

10 km
It burned the equivalent of 3.4% of the area of London (55 km² against 1,583 km²).

London boundary: geoBoundaries · Office for National Statistics (Open Government Licence v3.0).

This compares size, not location: both shapes are at the same scale, north up, centred on each other.

What happened to each town

  1. Kezhemsky Rayon where it started
    4,413 ha reached on 6 Sept
    0.1 %
  2. 972 ha reached on 17 Sept
    0.0 %

Burnt area inside each municipality, from crossing the GWIS perimeter with administrative boundaries. The distance runs from the point marking the centre of each area to the nearest fire: staying a kilometre away does not mean it reached the houses.

People and buildings inside the perimeter

GHSL 2015
Built-up area< 0.1 ha
Residents< 20

Inside the perimeter there was no noticeable built-up land and almost nobody lived there (GHSL 2015, satellite-based estimate).

This is an estimate on 100 m cells, made from satellite imagery and census data: it does not mean that homes burned or that anyone was harmed. The perimeter also contains land that never burned.

Source: Global Human Settlement Layer (GHS-BUILT-S and GHS-POP R2023A), European Commission Joint Research Centre (JRC), © European Union, CC BY 4.0. Sum inside the perimeter computed by WorldFires. human-settlement.emergency.copernicus.eu

The weather day by day

ECMWF ERA5 reanalysis at the fire location, the standard reference for past weather, and the Canadian Fire Weather Index (the same system Copernicus uses), computed by WorldFires from that data. Days after the fire run until the first rain.

Open-Meteo.com (CC BY 4.0) · Copernicus Climate Change Service (ERA5)

Day High Min. humidity Peak gust Rain Danger (FWI)
6 Sept 18.5 °C 35 % 35 km/h 0.0 mm High 24
7 Sept 19.2 °C 29 % 32 km/h 0.0 mm High 26
8 Sept 20.3 °C 28 % 19 km/h 0.0 mm Moderate 20
9 Sept 21.5 °C 30 % 24 km/h 0.0 mm High 23
10 Sept 22.0 °C 31 % 28 km/h 0.0 mm High 25
11 Sept 21.8 °C 36 % 22 km/h 0.0 mm High 22
12 Sept 21.5 °C 37 % 36 km/h 0.0 mm High 29
13 Sept 19.8 °C 31 % 37 km/h 0.0 mm High 32
14 Sept 20.3 °C 26 % 41 km/h 0.0 mm High 36
15 Sept 20.6 °C 28 % 37 km/h 0.0 mm High 34
16 Sept 20.3 °C 32 % 36 km/h 0.0 mm High 33
17 Sept 21.3 °C 33 % 38 km/h 0.0 mm High 34
18 Sept 20.5 °C 39 % 40 km/h 0.0 mm High 34
19 Sept 17.4 °C 51 % 28 km/h 0.0 mm Moderate 18
20 Sept 16.8 °C 45 % 31 km/h 0.0 mm Moderate 19
21 Sept 15.5 °C 49 % 26 km/h 0.0 mm Moderate 15
22 Sept 13.9 °C 38 % 24 km/h 0.0 mm Moderate 18
23 Sept 11.2 °C 38 % 36 km/h 0.0 mm High 23
24 Sept 11.5 °C 39 % 41 km/h 0.0 mm High 27
25 Sept 9.7 °C 32 % 23 km/h 0.0 mm Moderate 19
26 Sept 10.8 °C 37 % 24 km/h 0.0 mm Moderate 18
27 Sept 13.1 °C 30 % 16 km/h 0.0 mm Moderate 19
28 Sept 10.9 °C 41 % 35 km/h 2.3 mm High 26
29 Sept after 5.4 °C 69 % 30 km/h 3.4 mm Very low 0

Its twins: fires that started in the same weather

It started with an FWI of 23.7, a minimum humidity of 35% and 8 days without rain. Fires in the area that started in weather like this since 2016: 48.

FWI at the start 23.7
Minimum humidity 35 %
Days without rain 8
this fire chosen twins rest of the area
Almost identicalSimilar

Outlines of the closest twins

Kezhemsky Rayon fire, June 2018
10,591 ha 17 days FWI 24.9 Min. humidity 35 % 76 km away, in 2018

First rain (1 mm or more) after it ended: 3.7 mm on 14 Jul.

What happened to them

13 days
median duration
6,702 ha
median area
40 %
went past 10,000 ha
6.6 mm
rain at the end (median; 48 of 48 had it)

It burned an area similar to its twins (5,455 ha against a median of 6,702 ha) and lasted 23 days, against 13 days.

All of them had rain in the ten days after the end: the first rainy day brought a median of 6.6 mm.

This is a bank of analogues: it shows what usually happens, not what will happen. With fewer than 15 twins we give no figures. How we calculate it

How it ended

3.4 mmfirst rain
29 Septthe day after it ended
41km/h · max. gust

It was considered over on 28 Sept, and on 29 Sept 3.4 mm fell. We do not know whether the rain or the firefighters put it out. Twins with rain when they ended: 48 of 48, with a median of 6.6 mm.

Weather on this page: Open-Meteo.com (CC BY 4.0) · Copernicus Climate Change Service (ERA5)

How a twin is chosen

  • Same area: fires that have already ended, less than 250 km from this one, since 2016.
  • Same start: we compare the FWI on the first day, the minimum humidity that day and the run of days without rain before it. The slider sets how much they may differ.
  • Only pages with final weather data (ERA5 reanalysis) calculated in the same way as this fire’s; agricultural and grass burns and pages with data under review are left out.
  • Fires burning at the same time as this one (a week before or after) are left out: they share the same spell of weather and do not count as a precedent.
  • They are sorted by similarity, and the outlines of the first five are drawn.

How we calculate it

Before and after, from space

Drag the line to compare the same ground before the fire and after it.

Before · 30 Aug 2016
After · 5 Oct 2016

If the day is cloudy, change the date: each satellite passes once a day. In false colour the burnt ground looks brown or red.

Detections table · 1,051Every satellite heat detection, one by one, with time, satellite, power and coordinates.
⬇ Download CSV Times in UTC. Each detection is a 375 m pixel: a large fire yields hundreds per pass.
Date and timeSatelliteFRP (MW)LatLon

Other fires nearby

All fires in Russia

Frequently asked questions

How long did the Kezhemsky Rayon fire last?
According to the heat detections seen by satellite inside the perimeter, it burned from 6 September 2016 to 28 September 2016 (23 days). The perimeter dates it from 13 September 2016 to 28 September 2016.
How much area did it burn?
The perimeter GWIS (Copernicus) rebuilt from heat detections is 5,455 hectares (54.6 km²). It is an estimate: official national figures may differ.
Which municipalities burned?
The fire entered 2 municipalities: Kezhemsky Rayon (4,413 ha, 0.1 %); Boguchansky Rayon (972 ha, 0.0 %).
What was the weather like?
During the fire the temperature reached 22.0 °C, humidity dropped to 26 % and gusts hit 41 km/h. The fire danger index (FWI) reached 36, class High.
Where does this data come from?
From the GWIS (Copernicus) burnt perimeter, NASA FIRMS VIIRS hotspots and the administrative boundaries of Russia (geoBoundaries). It is not an official report.
How did the fires that started in similar weather in this area end?
Fires less than 250 km away that started since 2016 with a similar FWI, humidity and dry spell: 48. Their median duration was 13 days and their median area 6,702 ha; 40 % went past 10,000 ha. All of them had rain in the ten days after the end: the first rainy day brought a median of 6.6 mm.

Where to verify it

A satellite detection is not an official report. Final figures and the fire’s status are published by each country’s emergency service.

Emergency number: 112 · Emergency number and official warnings

Satellite cross-check

History of this page · 1 Changes in area, dates, name, official record or merged pages, compared every night since 24 October 2026.
  1. Start date: 13 September 2016 → 6 September 2016.

RSS Changes to this page With cross-checks and a citable version

Does something look wrong on this page?

This page is built from satellite data and official records, and it sometimes gets things wrong: the wrong dates, the wrong town, two fires merged into one, or something that was not a wildfire at all. If you know this fire first-hand (you live nearby, saw it, fought it or reported on it), tell us what really happened and we will check it.

Report an error
What do you think is wrong?

We will only use your email to reply about this report. Privacy. This is not an emergency service: if there is a fire now, call 112.

How we know this
  • Perimeter: GWIS (Copernicus), rebuilt from heat detections rather than mapped on imagery.
  • Dates adjusted with the VIIRS detections inside the perimeter, which said 13 September 2016 to 28 September 2016. 1,051 Suomi-NPP VIIRS detections on those dates.
  • We have not matched this page with any official record.
  • Weather: Copernicus ERA5 reanalysis at the fire location, in cells of about 25 km.
  • Built-up area and population come from the JRC Global Human Settlement Layer (epoch 2015, 100 m cells), summed inside the perimeter: an estimate of what was there, not a damage count.

How we build fire pages: methodology

Where this data comes from

The perimeter comes from the Copernicus Global Wildfire Information System (GWIS), which rebuilds it from MODIS and VIIRS heat detections and publishes it under CC BY 4.0. It is not measured on imagery as in Europe, so it is an estimate. Heat detections come from the VIIRS sensors aboard Suomi-NPP and NOAA-20, distributed by NASA FIRMS at 375 m resolution. Municipal boundaries come from geoBoundaries ADM2 (Open Data Commons Open Database License 1.0). The area per municipality is computed by WorldFires by crossing the perimeter with those boundaries, so it may differ from each country’s official figure.