Skip to content
worldfires
CD · Democratic Republic of the Congo · –

Katako-Kombe fire, 6 June 2026 Katako-Kombe, Lodja

Out · last detection 10 Jul 2026, 12:42 UTC

The fire started on 6 June 2026 in Katako-Kombe, Democratic Republic of the Congo, and satellites saw it burning for 35 days. Copernicus’s global GWIS system rebuilt a burnt perimeter of 19,077 hectares from heat detections, spread across 2 municipalities.

We are reviewing this page: some of its data look inconsistent (the place, the dates or the area), so treat them with caution.

GWIS near-real-time perimeter, from the layer that changed in August 2025: this fire is not compared with fires from earlier years, because since then the GWIS layer gives more and larger perimeters.

Burnt area
19,077ha
GWIS perimeter (Copernicus)
Duration
35days
6 Jun 2026 – 10 Jul 2026
Municipalities hit
2
territories
Started on
6 Jun
2026
Heat detections
883
in a single hotspot: 101 MW
Danger at start
14
Moderate · FWI index
Average daily power
325MW
detected power per day, on average

Where it burned

HOTSPOTS BY DAY 6 Jun10 Jul
10 Jul 2026

How it evolved, day by day

6 Jun 2026 · 17 MW · 3 7 Jun 2026 · 88 MW · 5 10 Jun 2026 · 2 MW · 1 11 Jun 2026 · 45 MW · 6 12 Jun 2026 · 3 MW · 1 13 Jun 2026 · 98 MW · 17 14 Jun 2026 · 190 MW · 23 15 Jun 2026 · 1,005 MW · 107 16 Jun 2026 · 925 MW · 78 18 Jun 2026 · 11 MW · 1 19 Jun 2026 · 32 MW · 7 20 Jun 2026 · 202 MW · 32 21 Jun 2026 · 165 MW · 17 22 Jun 2026 · 737 MW · 59 24 Jun 2026 · 176 MW · 36 25 Jun 2026 · 649 MW · 63 26 Jun 2026 · 958 MW · 87 27 Jun 2026 · 995 MW · 57 29 Jun 2026 · 205 MW · 30 30 Jun 2026 · 550 MW · 43 1 Jul 2026 · 264 MW · 29 2 Jul 2026 · 39 MW · 9 3 Jul 2026 · 630 MW · 35 4 Jul 2026 · 122 MW · 15 5 Jul 2026 · 182 MW · 23 6 Jul 2026 · 705 MW · 54 8 Jul 2026 · 269 MW · 27 9 Jul 2026 · 4 MW · 2 10 Jul 2026 · 157 MW · 16
6 Jun 15 Jun 21 Jun 29 Jun 5 Jul

Fire radiative power detected each day, in megawatts, and number of hotspots. The magenta bar marks the peak day.

The weather it burned in

35°high
32km/h · peak gust
21%lowest humidity

It had gone 13 days without rain (1 mm or more) when it started. Rain came after the fire: 1.2 mm on 14 Jul.

This area had burned before

100% of the perimeter overlaps earlier fires recorded since 2016: 16,041 ha in 2016, 7,267 ha in 2017, 4,219 ha in 2018, 2,596 ha in 2019, 7,565 ha in 2020, 11,794 ha in 2021, 13,612 ha in 2022, 4,995 ha in 2023, 8,810 ha in 2024, 2,742 ha in 2025. Part of it burned more than once, so the yearly figures add up to more than the 21,735 ha that had burned before.

How big is it?

10 km
It burned the equivalent of 12% of the area of London (191 km² against 1,583 km²).

London boundary: geoBoundaries · Office for National Statistics (Open Government Licence v3.0).

This compares size, not location: both shapes are at the same scale, north up, centred on each other.

What happened to each town

  1. Katako-Kombe where it started
    23,367 ha reached on 6 Jun
    1.0 %
  2. 216 ha reached on 7 Jun
    0.0 %

Burnt area inside each municipality, from crossing the GWIS perimeter with administrative boundaries. The distance runs from the point marking the centre of each area to the nearest fire: staying a kilometre away does not mean it reached the houses.

People and buildings inside the perimeter

GHSL 2025
Built-up area17 ha
Residents≈ 550

Inside the perimeter there were about 17 hectares of built-up land and about 550 residents (GHSL 2025, satellite-based estimate).

This is an estimate on 100 m cells, made from satellite imagery and census data: it does not mean that homes burned or that anyone was harmed. The perimeter also contains land that never burned. The GHSL 2025 epoch is a projection made from 2020 and earlier data.

Source: Global Human Settlement Layer (GHS-BUILT-S and GHS-POP R2023A), European Commission Joint Research Centre (JRC), © European Union, CC BY 4.0. Sum inside the perimeter computed by WorldFires. human-settlement.emergency.copernicus.eu

The weather day by day

ECMWF ERA5 reanalysis at the fire location, the standard reference for past weather, and the Canadian Fire Weather Index (the same system Copernicus uses), computed by WorldFires from that data. Days after the fire run until the first rain.

Open-Meteo.com (CC BY 4.0) · Copernicus Climate Change Service (ERA5)

Day High Min. humidity Peak gust Rain Danger (FWI)
6 Jun 31.4 °C 52 % 22 km/h 0.0 mm Moderate 14
7 Jun 32.5 °C 52 % 29 km/h 3.1 mm Moderate 14
8 Jun 31.7 °C 53 % 31 km/h 0.6 mm Very low 2
9 Jun 31.7 °C 50 % 25 km/h 0.1 mm Low 8
10 Jun 32.6 °C 44 % 26 km/h 0.1 mm Moderate 12
11 Jun 31.7 °C 47 % 27 km/h 0.1 mm Moderate 14
12 Jun 32.7 °C 38 % 24 km/h 0.0 mm Moderate 18
13 Jun 33.4 °C 33 % 26 km/h 0.0 mm High 23
14 Jun 33.9 °C 30 % 26 km/h 0.0 mm High 26
15 Jun 33.1 °C 33 % 22 km/h 0.0 mm High 22
16 Jun 29.6 °C 58 % 27 km/h 0.7 mm Moderate 12
17 Jun 31.9 °C 42 % 28 km/h 0.0 mm Moderate 14
18 Jun 32.7 °C 37 % 23 km/h 0.0 mm Moderate 18
19 Jun 31.6 °C 43 % 17 km/h 0.0 mm Moderate 17
20 Jun 33.5 °C 35 % 31 km/h 0.0 mm High 23
21 Jun 34.5 °C 27 % 24 km/h 0.0 mm High 27
22 Jun 33.3 °C 27 % 20 km/h 0.0 mm High 27
23 Jun 32.3 °C 32 % 19 km/h 0.0 mm High 24
24 Jun 32.3 °C 32 % 20 km/h 0.0 mm High 23
25 Jun 33.6 °C 27 % 23 km/h 0.0 mm High 30
26 Jun 33.5 °C 30 % 20 km/h 0.0 mm High 29
27 Jun 33.9 °C 24 % 30 km/h 0.0 mm Very high 39
28 Jun 33.3 °C 28 % 21 km/h 0.0 mm High 31
29 Jun 33.3 °C 27 % 22 km/h 0.0 mm High 34
30 Jun 34.5 °C 24 % 23 km/h 0.0 mm High 36
1 Jul 33.6 °C 28 % 20 km/h 0.0 mm High 32
2 Jul 32.6 °C 36 % 25 km/h 0.0 mm High 28
3 Jul 34.4 °C 31 % 22 km/h 0.0 mm High 28
4 Jul 34.6 °C 27 % 23 km/h 0.0 mm High 34
5 Jul 35.0 °C 21 % 27 km/h 0.0 mm Very high 43
6 Jul 35.3 °C 21 % 32 km/h 0.0 mm Very high 47
7 Jul 33.6 °C 26 % 26 km/h 0.0 mm Very high 44
8 Jul 34.3 °C 28 % 28 km/h 0.0 mm Very high 43
9 Jul 33.2 °C 35 % 17 km/h 0.0 mm High 31
10 Jul 33.6 °C 34 % 19 km/h 0.0 mm High 32
11 Jul after 32.6 °C 39 % 22 km/h 0.0 mm High 34
12 Jul after 33.6 °C 34 % 20 km/h 0.0 mm High 28
13 Jul after 34.7 °C 32 % 19 km/h 0.0 mm High 26
14 Jul after 33.1 °C 41 % 23 km/h 1.2 mm High 30

Before and after, from space

Drag the line to compare the same ground before the fire and after it.

Before · 30 May 2026
After · 17 Jul 2026

If the day is cloudy, change the date: each satellite passes once a day. In false colour the burnt ground looks brown or red.

The smoke

CAMS · Copernicus

On 9 July 2026 the air beside the fire reached 503 µg/m³ of PM2.5. That day averaged 258: 17 times the WHO daily guideline (15).

PM2.5 peak503 µg/m³
Days over the guideline31 days
PM10520 µg/m³
Optical depth3.21
11 Jun18 Jun25 Jun2 Jul9 Jul
Good Fair Moderate Poor Very poor Extremely poor

Particles from the Copernicus CAMS model at the centre of the perimeter; these are not measurements in each town. The pale bar is the worst hour, the solid one the daily average.

Open-Meteo.com (CC BY 4.0) · Copernicus Atmosphere Monitoring Service (CAMS)

Detections table · 883Every satellite heat detection, one by one, with time, satellite, power and coordinates.
⬇ Download CSV Times in UTC. Each detection is a 375 m pixel: a large fire yields hundreds per pass.
Date and timeSatelliteFRP (MW)LatLon

Other fires nearby

All fires in Democratic Republic of the Congo

Frequently asked questions

How long did the Katako-Kombe fire last?
According to the heat detections seen by satellite inside the perimeter, it burned from 6 June 2026 to 10 July 2026 (35 days). The perimeter dates it from 13 June 2026 to 8 July 2026.
How much area did it burn?
The perimeter GWIS (Copernicus) rebuilt from heat detections is 19,077 hectares (190.8 km²). It is an estimate: official national figures may differ.
Which municipalities burned?
The fire entered 2 municipalities: Katako-Kombe (23,367 ha, 1.0 %); Lodja (216 ha, 0.0 %).
What was the weather like?
During the fire the temperature reached 35.3 °C, humidity dropped to 21 % and gusts hit 32 km/h. The fire danger index (FWI) reached 47, class Very high.
Where does this data come from?
From the GWIS (Copernicus) burnt perimeter, NASA FIRMS VIIRS hotspots and the administrative boundaries of Democratic Republic of the Congo (geoBoundaries). It is not an official report.

Where to verify it

A satellite detection is not an official report. Final figures and the fire’s status are published by each country’s emergency service.

Satellite cross-check

History of this page · 3 Changes in area, dates, name, official record or merged pages, compared every night since 24 October 2026.
  1. Area: 23,409 → 19,077 ha.
  2. Last day with fire: 8 July 2026 → 10 July 2026.
  3. Start date: 13 June 2026 → 6 June 2026.

RSS Changes to this page With cross-checks and a citable version

Does something look wrong on this page?

This page is built from satellite data and official records, and it sometimes gets things wrong: the wrong dates, the wrong town, two fires merged into one, or something that was not a wildfire at all. If you know this fire first-hand (you live nearby, saw it, fought it or reported on it), tell us what really happened and we will check it.

Report an error
What do you think is wrong?

We will only use your email to reply about this report. Privacy.

How we know this
  • Perimeter: GWIS (Copernicus), rebuilt from heat detections rather than mapped on imagery; 3 polygons grouped in this page.
  • Dates adjusted with the VIIRS detections inside the perimeter, which said 13 June 2026 to 8 July 2026. 883 Suomi-NPP VIIRS detections on those dates.
  • We have not matched this page with any official record.
  • Weather: Copernicus ERA5 reanalysis at the fire location, in cells of about 25 km.
  • Built-up area and population come from the JRC Global Human Settlement Layer (epoch 2025, 100 m cells), summed inside the perimeter: an estimate of what was there, not a damage count.

How we build fire pages: methodology

Where this data comes from

The perimeter comes from the Copernicus Global Wildfire Information System (GWIS), which rebuilds it from MODIS and VIIRS heat detections and publishes it under CC BY 4.0. It is not measured on imagery as in Europe, so it is an estimate. Heat detections come from the VIIRS sensors aboard Suomi-NPP and NOAA-20, distributed by NASA FIRMS at 375 m resolution. Municipal boundaries come from geoBoundaries ADM2 (Creative Commons Attribution 3.0 Intergovernmental Organisations (CC BY 3.0 IGO)). The area per municipality is computed by WorldFires by crossing the perimeter with those boundaries, so it may differ from each country’s official figure.