Kariba fire, 20 August 2019 Kariba, Hurungwe
The fire started on 20 August 2019 in Kariba, Zimbabwe, and satellites saw it burning for 11 days. Copernicus’s global GWIS system rebuilt a burnt perimeter of 10,382 hectares from heat detections, spread across 2 municipalities.
It is the 19th largest in Mashonaland West since 2016 (of 824 with a page). Number 7 in Zimbabwe in 2019, of 282.
Compare with…
- Burnt area
- 10,382ha
- GWIS perimeter (Copernicus)
- Duration
- 11days
- 20 Aug 2019 – 30 Aug 2019
- Municipalities hit
- 2
- districts
- Started on
- 20 Aug
- 2019
- Heat detections
- 326
- in a single hotspot: 160 MW
- Danger at start
- 41
- Very high · FWI index
- Average daily power
- 364MW
- detected power per day, on average
Where it burned
How it evolved, day by day
Fire radiative power detected each day, in megawatts, and number of hotspots. The magenta bar marks the peak day.
The weather it burned in
It had gone more than two months without rain (1 mm or more) when it started.
This area had burned before
75% of the perimeter overlaps earlier fires recorded since 2016: 7,037 ha in 2016, 1,285 ha in 2017, 240 ha in 2018. Part of it burned more than once, so the yearly figures add up to more than the 7,829 ha that had burned before.
- 7,034 ha Hurungwe fire, August 2016 22,552 ha in total; the hectares shown are those it shares with this fire
- 986 ha Kariba fire, August 2017 1,516 ha in total; the hectares shown are those it shares with this fire
- 280 ha Hurungwe fire, August 2017 1,238 ha in total; the hectares shown are those it shares with this fire
- 132 ha Kariba fire, August 2018 4,982 ha in total; the hectares shown are those it shares with this fire
- 106 ha Kariba fire, June 2018 1,591 ha in total; the hectares shown are those it shares with this fire
- 20 ha Kariba fire, August 2017 5,505 ha in total; the hectares shown are those it shares with this fire
- 3 ha Hurungwe fire, June 2016 2,287 ha in total; the hectares shown are those it shares with this fire
- 2 ha Kariba fire, August 2018 5,961 ha in total; the hectares shown are those it shares with this fire
How big is it?
London boundary: geoBoundaries · Office for National Statistics (Open Government Licence v3.0).
Paris boundary: geoBoundaries · Institut national de l'information géographique et forestière (IGN-F) (Etalab Open License 2.0).
Madrid boundary: geoBoundaries · Open Data ESRI, IGN Central Registry of Cartography Area (CC BY 4.0).
Berlin boundary: geoBoundaries · Federal Agency for Cartography and Geodesy (dl-de/by-2-0).
This compares size, not location: both shapes are at the same scale, north up, centred on each other.
What happened to each town
-
Kariba where it started7,778 ha reached on 20 Aug0.9 %
-
2,640 ha reached on 22 Aug0.1 %
Burnt area inside each municipality, from crossing the GWIS perimeter with administrative boundaries. The distance runs from the point marking the centre of each area to the nearest fire: staying a kilometre away does not mean it reached the houses.
People and buildings inside the perimeter
GHSL 2020Inside the perimeter there was no noticeable built-up land and almost nobody lived there (GHSL 2020, satellite-based estimate).
This is an estimate on 100 m cells, made from satellite imagery and census data: it does not mean that homes burned or that anyone was harmed. The perimeter also contains land that never burned.
Source: Global Human Settlement Layer (GHS-BUILT-S and GHS-POP R2023A), European Commission Joint Research Centre (JRC), © European Union, CC BY 4.0. Sum inside the perimeter computed by WorldFires. human-settlement.emergency.copernicus.eu
The weather day by day
ECMWF ERA5 reanalysis at the fire location, the standard reference for past weather, and the Canadian Fire Weather Index (the same system Copernicus uses), computed by WorldFires from that data. Days after the fire run until the first rain.
Open-Meteo.com (CC BY 4.0) · Copernicus Climate Change Service (ERA5)
| Day | High | Min. humidity | Peak gust | Rain | Danger (FWI) |
|---|---|---|---|---|---|
| 20 Aug | 27.9 °C | 17 % | 32 km/h | 0.0 mm | Very high 41 |
| 21 Aug | 24.6 °C | 35 % | 38 km/h | 0.5 mm | High 36 |
| 22 Aug | 23.4 °C | 27 % | 30 km/h | 0.0 mm | High 33 |
| 23 Aug | 26.1 °C | 22 % | 30 km/h | 0.0 mm | High 34 |
| 24 Aug | 26.4 °C | 24 % | 32 km/h | 0.0 mm | High 36 |
| 25 Aug | 27.3 °C | 28 % | 36 km/h | 0.0 mm | High 38 |
| 26 Aug | 29.7 °C | 31 % | 37 km/h | 0.0 mm | Very high 39 |
| 27 Aug | 31.9 °C | 28 % | 36 km/h | 0.0 mm | Very high 38 |
| 28 Aug | 31.6 °C | 22 % | 47 km/h | 0.0 mm | Very high 47 |
| 29 Aug | 32.0 °C | 21 % | 47 km/h | 0.0 mm | Very high 48 |
| 30 Aug | 31.0 °C | 25 % | 49 km/h | 0.0 mm | Extreme 50 |
| 31 Aug after | 32.6 °C | 19 % | 46 km/h | 0.0 mm | Extreme 51 |
| 1 Sept after | 31.3 °C | 25 % | 31 km/h | 0.0 mm | Very high 42 |
| 2 Sept after | 29.9 °C | 33 % | 42 km/h | 0.0 mm | Very high 42 |
| 3 Sept after | 28.6 °C | 32 % | 44 km/h | 0.0 mm | Very high 42 |
| 4 Sept after | 29.6 °C | 24 % | 38 km/h | 0.0 mm | Very high 40 |
| 5 Sept after | 30.5 °C | 19 % | 45 km/h | 0.0 mm | Very high 48 |
| 6 Sept after | 30.1 °C | 10 % | 48 km/h | 0.0 mm | Extreme 58 |
| 7 Sept after | 24.0 °C | 29 % | 44 km/h | 0.0 mm | Very high 44 |
| 8 Sept after | 24.6 °C | 21 % | 34 km/h | 0.0 mm | High 37 |
| 9 Sept after | 25.3 °C | 25 % | 30 km/h | 0.0 mm | High 37 |
Before and after, from space
Drag the line to compare the same ground before the fire and after it.
If the day is cloudy, change the date: each satellite passes once a day. In false colour the burnt ground looks brown or red.
Detections table · 326Every satellite heat detection, one by one, with time, satellite, power and coordinates.
| Date and time | Satellite | FRP (MW) | Lat | Lon |
|---|
Other fires nearby
- 22,552 haHurungwe29 August 2016 · 18 days · 2 km away
- 11,838 haKariba16 September 2020 · 13 days · 6 km away
- 33,783 haHurungwe18 September 2022 · 11 days · 10 km away
- 11,221 haKariba18 August 2019 · 4 days · 17 km away
- 10,342 haHurungwe4 November 2021 · 7 days · 22 km away
- 13,417 haHurungwe29 August 2026 · 21 days · 24 km away
Frequently asked questions
- How long did the Kariba fire last?
- According to the heat detections seen by satellite inside the perimeter, it burned from 20 August 2019 to 30 August 2019 (11 days). The perimeter dates it from 20 August 2019 to 25 August 2019.
- How much area did it burn?
- The perimeter GWIS (Copernicus) rebuilt from heat detections is 10,382 hectares (103.8 km²). It is an estimate: official national figures may differ.
- Which municipalities burned?
- The fire entered 2 municipalities: Kariba (7,778 ha, 0.9 %); Hurungwe (2,640 ha, 0.1 %).
- What was the weather like?
- During the fire the temperature reached 32.0 °C, humidity dropped to 17 % and gusts hit 49 km/h. The fire danger index (FWI) reached 50, class Extreme.
- Where does this data come from?
- From the GWIS (Copernicus) burnt perimeter, NASA FIRMS VIIRS hotspots and the administrative boundaries of Zimbabwe (geoBoundaries). It is not an official report.
Where to verify it
A satellite detection is not an official report. Final figures and the fire’s status are published by each country’s emergency service.
Satellite cross-check
History of this page Changes in area, dates, name, official record or merged pages, compared every night since 24 October 2026.
No changes since 24 October 2026.
Does something look wrong on this page?
This page is built from satellite data and official records, and it sometimes gets things wrong: the wrong dates, the wrong town, two fires merged into one, or something that was not a wildfire at all. If you know this fire first-hand (you live nearby, saw it, fought it or reported on it), tell us what really happened and we will check it.
Report an error
How we know this
- Perimeter: GWIS (Copernicus), rebuilt from heat detections rather than mapped on imagery.
- Dates adjusted with the VIIRS detections inside the perimeter, which said 20 August 2019 to 25 August 2019. 326 Suomi-NPP VIIRS detections on those dates.
- We have not matched this page with any official record.
- Weather: Copernicus ERA5 reanalysis at the fire location, in cells of about 25 km.
- Built-up area and population come from the JRC Global Human Settlement Layer (epoch 2020, 100 m cells), summed inside the perimeter: an estimate of what was there, not a damage count.
Where this data comes from
The perimeter comes from the Copernicus Global Wildfire Information System (GWIS), which rebuilds it from MODIS and VIIRS heat detections and publishes it under CC BY 4.0. It is not measured on imagery as in Europe, so it is an estimate. Heat detections come from the VIIRS sensors aboard Suomi-NPP and NOAA-20, distributed by NASA FIRMS at 375 m resolution. Municipal boundaries come from geoBoundaries ADM2 (Creative Commons Attribution 3.0 Intergovernmental Organisations (CC BY 3.0 IGO)). The area per municipality is computed by WorldFires by crossing the perimeter with those boundaries, so it may differ from each country’s official figure.