Skip to content
worldfires
BR · Brazil · –

João Pinheiro fire, September 2025 João Pinheiro

Out · last detection

The fire started on in João Pinheiro, Brazil, and satellites saw it burning for 8 days. Copernicus’s global GWIS system rebuilt a burnt perimeter of 4,077 hectares from heat detections, spread across a single municipality.

It is number 106 by size of the 210 fires with a page that started in Minas Gerais since 2016. Number 356 in Brazil in 2025, of 526.

The power measured by the satellite is low (26.4 MW in the strongest hotspot), more typical of grass or stubble burning, or a slow surface fire, than of a large crown fire.

Burnt area
4,077ha
GWIS perimeter (Copernicus)
Duration
8days
9 Sept 2025 – 16 Sept 2025
Municipalities hit
1
municipalities
Started on
9 Sept
2025
Heat detections
123
in a single hotspot: 26 MW
Danger at start
44
Very high · FWI index
Average daily power
92MW
detected power per day, on average

Where it burned

HOTSPOTS BY DAY 9 Sept16 Sept
16 Sept 2025

How it evolved, day by day

9 Sept 2025 · 38 MW · 4 10 Sept 2025 · 54 MW · 14 11 Sept 2025 · 56 MW · 17 12 Sept 2025 · 92 MW · 14 13 Sept 2025 · 249 MW · 22 14 Sept 2025 · 150 MW · 51 16 Sept 2025 · 4 MW · 1
9 Sept 11 Sept 13 Sept 16 Sept

Fire radiative power detected each day, in megawatts, and number of hotspots. The magenta bar marks the peak day.

The weather it burned in

35°high
37km/h · peak gust
14%lowest humidity

It had gone more than two months without rain (1 mm or more) when it started. Rain came after the fire: 4.7 mm on 22 Sept.

This area had burned before

72% of the perimeter overlaps earlier fires recorded since 2016: 307 ha in 2016, 1,864 ha in 2017, 24 ha in 2019, 1,352 ha in 2020, 1,045 ha in 2021. Part of it burned more than once, so the yearly figures add up to more than the 2,922 ha that had burned before.

How big is it?

10 km
It burned the equivalent of 2.6% of the area of London (41 km² against 1,583 km²).

London boundary: geoBoundaries · Office for National Statistics (Open Government Licence v3.0).

This compares size, not location: both shapes are at the same scale, north up, centred on each other.

What happened to each town

  1. João Pinheiro 46,801 inhabitants where it started
    4,092 ha reached on 9 Sept
    0.4 %

Burnt area inside each municipality, from crossing the GWIS perimeter with administrative boundaries. The distance runs from the point marking the centre of each area to the nearest fire: staying a kilometre away does not mean it reached the houses.

People and buildings inside the perimeter

GHSL 2025
Built-up area1.0 ha
Residents≈ 30

Inside the perimeter there were about 1.0 hectares of built-up land and about 30 residents (GHSL 2025, satellite-based estimate).

This is an estimate on 100 m cells, made from satellite imagery and census data: it does not mean that homes burned or that anyone was harmed. The perimeter also contains land that never burned. The GHSL 2025 epoch is a projection made from 2020 and earlier data.

Source: Global Human Settlement Layer (GHS-BUILT-S and GHS-POP R2023A), European Commission Joint Research Centre (JRC), © European Union, CC BY 4.0. Sum inside the perimeter computed by WorldFires. human-settlement.emergency.copernicus.eu

The weather day by day

ECMWF ERA5 reanalysis at the fire location, the standard reference for past weather, and the Canadian Fire Weather Index (the same system Copernicus uses), computed by WorldFires from that data. Days after the fire run until the first rain.

Open-Meteo.com (CC BY 4.0) · Copernicus Climate Change Service (ERA5)

Started with 60 days without rain: 55 % of the area in Brazil

Day High Min. humidity Peak gust Rain Danger (FWI)
9 Sept 33.8 °C 22 % 34 km/h 0.0 mm Very high 44
10 Sept 35.2 °C 16 % 29 km/h 0.0 mm Very high 40
11 Sept 35.4 °C 14 % 32 km/h 0.0 mm Very high 42
12 Sept 35.3 °C 18 % 34 km/h 0.0 mm Very high 47
13 Sept 33.7 °C 21 % 34 km/h 0.0 mm Very high 49
14 Sept 33.0 °C 25 % 36 km/h 0.0 mm Very high 49
15 Sept 31.4 °C 31 % 37 km/h 0.0 mm Very high 47
16 Sept 33.3 °C 25 % 37 km/h 0.0 mm Very high 48
17 Sept after 33.2 °C 25 % 34 km/h 0.0 mm Very high 46
18 Sept after 34.9 °C 24 % 34 km/h 0.0 mm Very high 45
19 Sept after 32.0 °C 30 % 42 km/h 0.0 mm Extreme 50
20 Sept after 33.1 °C 28 % 36 km/h 0.0 mm Very high 43
21 Sept after 34.8 °C 21 % 37 km/h 0.0 mm Very high 50
22 Sept after 32.8 °C 35 % 40 km/h 4.7 mm Extreme 53

Its twins: fires that started in the same weather

It started with an FWI of 43.8, a minimum humidity of 22% and more than two months without rain. Fires in the area that started in weather like this since 2016: 22.

FWI at the start 43.8
Minimum humidity 22 %
Days without rain 60+
this fire chosen twins rest of the area
Almost identicalSimilar

Outlines of the closest twins

Brasilândia de Minas fire, September 2020
10,666 ha 18 days FWI 44.4 Min. humidity 21 % 44 km away, in 2020

First rain (1 mm or more) after it ended: 3.0 mm on 23 Sept.

What happened to them

8 days
median duration
4,258 ha
median area
23 %
went past 10,000 ha
3.1 mm
rain at the end (median; 10 of 22 had it)

It burned an area similar to its twins (4,077 ha against a median of 4,258 ha) and lasted 8 days, against 8 days.

In 12 of 22, not even 1 mm fell in the ten days after the end: they went out without rain. In the rest, the first rainy day brought a median of 3.1 mm.

This is a bank of analogues: it shows what usually happens, not what will happen. With fewer than 15 twins we give no figures. How we calculate it

How it ended

4.7 mmfirst rain
22 Sept6 days after it ended
37km/h · max. gust

It was considered over on 16 Sept, and on 22 Sept 4.7 mm fell. We do not know whether the rain or the firefighters put it out. Twins with rain when they ended: 10 of 22, with a median of 3.1 mm.

Weather on this page: Open-Meteo.com (CC BY 4.0) · Copernicus Climate Change Service (ERA5)

How a twin is chosen

  • Same area: fires that have already ended, less than 250 km from this one, since 2016.
  • Same start: we compare the FWI on the first day, the minimum humidity that day and the run of days without rain before it. The slider sets how much they may differ.
  • Only pages with final weather data (ERA5 reanalysis) calculated in the same way as this fire’s; agricultural and grass burns and pages with data under review are left out.
  • Fires burning at the same time as this one (a week before or after) are left out: they share the same spell of weather and do not count as a precedent.
  • They are sorted by similarity, and the outlines of the first five are drawn.

How we calculate it

Before and after, from space

Drag the line to compare the same ground before the fire and after it.

Before · 2 Sept 2025
After · 23 Sept 2025

If the day is cloudy, change the date: each satellite passes once a day. In false colour the burnt ground looks brown or red.

The smoke

CAMS · Copernicus

On 11 September 2025 the air beside the fire reached 20 µg/m³ of PM2.5, but no daily average passed the WHO guideline (15).

PM2.5 peak20 µg/m³
Days over the guideline0 days
PM1021 µg/m³
Optical depth0.32
7 Sept10 Sept13 Sept16 Sept19 Sept
Good Fair Moderate Poor Very poor Extremely poor

Particles from the Copernicus CAMS model at the centre of the perimeter; these are not measurements in each town. The pale bar is the worst hour, the solid one the daily average.

Open-Meteo.com (CC BY 4.0) · Copernicus Atmosphere Monitoring Service (CAMS)

Detections table · 123Every satellite heat detection, one by one, with time, satellite, power and coordinates.
⬇ Download CSV Times in UTC. Each detection is a 375 m pixel: a large fire yields hundreds per pass.
Date and timeSatelliteFRP (MW)LatLon

Other fires nearby

All fires in Brazil

Frequently asked questions

How long did the João Pinheiro fire last?
GWIS (Copernicus) dates it between 9 September 2025 and 16 September 2025: 8 days between the first and last heat detection of the perimeter.
How much area did it burn?
The perimeter GWIS (Copernicus) rebuilt from heat detections is 4,077 hectares (40.8 km²). It is an estimate: official national figures may differ.
Which municipalities burned?
The fire only entered João Pinheiro (4,092 ha, 0.4 %).
What was the weather like?
During the fire the temperature reached 35.4 °C, humidity dropped to 14 % and gusts hit 37 km/h. The fire danger index (FWI) reached 49, class Very high.
Where does this data come from?
From the GWIS (Copernicus) burnt perimeter, NASA FIRMS VIIRS hotspots and the administrative boundaries of Brazil (geoBoundaries). It is not an official report.
How did the fires that started in similar weather in this area end?
Fires less than 250 km away that started since 2016 with a similar FWI, humidity and dry spell: 22. Their median duration was 8 days and their median area 4,258 ha; 23 % went past 10,000 ha. In 12 of 22, not even 1 mm fell in the ten days after the end: they went out without rain. In the rest, the first rainy day brought a median of 3.1 mm.

Where to verify it

A satellite detection is not an official report. Final figures and the fire’s status are published by each country’s emergency service.

Emergency number: 193 · Emergency number and official warnings

Satellite cross-check

History of this page Changes in area, dates, name, official record or merged pages, compared every night since 24 October 2026.

Does something look wrong on this page?

This page is built from satellite data and official records, and it sometimes gets things wrong: the wrong dates, the wrong town, two fires merged into one, or something that was not a wildfire at all. If you know this fire first-hand (you live nearby, saw it, fought it or reported on it), tell us what really happened and we will check it.

Report an error
What do you think is wrong?

We will only use your email to reply about this report. Privacy. This is not an emergency service: if there is a fire now, call 193.

How we know this
  • Perimeter: GWIS (Copernicus), rebuilt from heat detections rather than mapped on imagery.
  • Dates from the perimeter: the VIIRS detections inside it did not change them. 123 Suomi-NPP VIIRS detections on those dates.
  • We have not matched this page with any official record.
  • Weather: Copernicus ERA5 reanalysis at the fire location, in cells of about 25 km.
  • Built-up area and population come from the JRC Global Human Settlement Layer (epoch 2025, 100 m cells), summed inside the perimeter: an estimate of what was there, not a damage count.

How we build fire pages: methodology

Where this data comes from

The perimeter comes from the Copernicus Global Wildfire Information System (GWIS), which rebuilds it from MODIS and VIIRS heat detections and publishes it under CC BY 4.0. It is not measured on imagery as in Europe, so it is an estimate. Heat detections come from the VIIRS sensors aboard Suomi-NPP and NOAA-20, distributed by NASA FIRMS at 375 m resolution. Municipal boundaries come from geoBoundaries ADM2 (Creative Commons Attribution 3.0 Intergovernmental Organisations (CC BY 3.0 IGO)). The area per municipality is computed by WorldFires by crossing the perimeter with those boundaries, so it may differ from each country’s official figure.