Burned area
satellite only12,368ha
Perimeter published by GWIS (Copernicus).
- Source
- GWIS (Copernicus)
- Date
- 8 Sept 2024 – 14 Sept 2024
+− cross-check
No official record is matched to this page to compare it with.
BR · Brazil · –
Jataí fire, 8 September 2024 Serranópolis, Jataí
Out · last detection 14 Sept 2024, 04:10 UTC
The fire started on 8 September 2024 in Jataí, Brazil, and satellites saw it burning for 7 days. Copernicus’s global GWIS system rebuilt a burnt perimeter of 12,368 hectares from heat detections, spread across 2 municipalities.
It is the 63th largest in Goiás since 2016 (of 488 with a page). Number 244 in Brazil in 2024, of 1301.
Use this data
Compare with…
Use this data
Fire page data · version 2026-10-24matches the official recordwith caveatssatellite onlymodel
When copying, the sentence is
Tick the figures you want: they make up the lede and the CSV.
Duration by satellite
satellite only7days
8 Sept 2024 to 14 Sept 2024: first and last day with fire on the page.
- Source
- GWIS (Copernicus) · NASA FIRMS · VIIRS
- Date
- last detection: 14 Sept 2024, 04:10 UTC
+− cross-check
Satellites pass a few times a day and cloud or smoke can hide the fire: a lack of detections is not an official extinction. Each country’s emergency service declares a fire contained or out.
Start
satellite only8 Sept 2024
First day with fire seen by the satellites or the perimeter.
- Source
- GWIS (Copernicus) · NASA FIRMS · VIIRS
- Date
- 8 Sept 2024
+− cross-check
No official record is matched to this page, so the alert time and the cause are not known here.
Hotspots
satellite only466
VIIRS detections at 375 m. Most intense hotspot: 113 MW.
- Source
- NASA FIRMS · VIIRS (Suomi NPP)
- Date
- 8 Sept 2024 – 14 Sept 2024
+− cross-check
There is no official record to compare with. Each hotspot is a pixel detected in one satellite pass, not a separate fire.
The worst day
satellite only1,618MW
Total radiative power on 8 September 2024; hotspots that day: 95.
- Source
- NASA FIRMS · VIIRS (FRP)
- Date
- 8 Sept 2024
+− cross-check
Fire radiative power (FRP) measures the energy the fire gives off when the satellite passes. Added up by day, it compares intensity, not area.
Danger at the start
model78.4FWI · very extreme
Fire Weather Index (Canadian system) computed by WorldFires for the day the fire started. Consecutive days without rain before: 60.
- Source
- WorldFires calculation (Canadian FWI system)
- Date
- 8 Sept 2024, local noon
- Model
- ERA5 0,25° (ECMWF · Copernicus C3S) · Open-Meteo.com
+− cross-check
This is an index computed from weather model data, not a measurement of the fire nor an official warning. Danger warnings are issued by each country’s authority. Emergency number and official warnings
Weather during the fire
model35.2°C · 16% RH
High of 35.2 °C and minimum humidity of 16% on 13 September 2024; gusts of 44 km/h on 8 September 2024.
- Source
- weather model at the fire’s grid cell
- Date
- 8 Sept 2024 – 14 Sept 2024
- Model
- ERA5 0,25° (ECMWF · Copernicus C3S) · Open-Meteo.com
+− cross-check
These are model values for a cell of about 25 km, not from a weather station: they may differ from what was measured on the ground.
Living inside
model≈ 20people
Estimated residents inside the perimeter and 1.4 ha of built-up area (100 m grid, epoch 2025).
- Source
- GHSL R2023A · JRC
- Date
- calculated on 24 October 2026
+− cross-check
This is an estimate on 100 m cells, made from satellite imagery and census data: it does not mean that homes burned or that anyone was harmed. The perimeter also contains land that never burned.
This page’s change log has been kept since 24 October 2026: every night what it publishes is compared and the difference is logged. Anything earlier is reconstructed from each source’s date and marked as reconstructed.
Show
-
· reconstructed weatherWeather and FWI computed from the ERA5 reanalysis
-
· reconstructed GHSLPopulation and built-up area computed
What was saved on 24 October 2026
Every night a snapshot of what the page shows is saved. If anything changes, it appears in the list as a log entry.
- Area
- 12,368 ha
- Dates
- 8 Sept 2024 – 14 Sept 2024
- Name
- Jataí
- Official record
- —
Versioned permanent link
https://worldfires.org/en/fire/jatai-2024-09-10?v=2026-10-24A version keeps the area, dates, name and official record; the area as it was logged (changes under 2% are not logged). The map, hotspots and weather always show today’s data.
Citation
A lede of about 60 words figures only, no adjectives
CSV for this fire jatai-2024-09-10.csv · daily, no individual hotspots
| fecha | focos_viirs | frp_mw | tmax_c | tmin_c | hr_min_pct | viento_max_kmh | racha_max_kmh | precip_mm | fwi | clase_fwi | dentro_del_incendio |
|---|---|---|---|---|---|---|---|---|---|---|---|
| 2024-09-08 | 95 | 1,618 | 34.8 | 20.8 | 12 | 20 | 43.6 | 0 | 78.4 | muy_extremo | 1 |
| 2024-09-09 | 124 | 1,104 | 33.3 | 18.2 | 14 | 15.9 | 36.7 | 0 | 64 | extremo | 1 |
| 2024-09-10 | 165 | 1,341 | 33.9 | 14.3 | 15 | 14 | 32.4 | 0 | 62.6 | extremo | 1 |
| 2024-09-11 | 57 | 679 | 34.2 | 15.3 | 15 | 17.9 | 39.2 | 0 | 71.5 | muy_extremo | 1 |
| 2024-09-12 | 16 | 42 | 34.7 | 16.4 | 15 | 13.4 | 28.1 | 0 | 60.2 | extremo | 1 |
| 2024-09-13 | 5 | 35 | 35.2 | 17.2 | 16 | 11.9 | 28.8 | 0 | 57.9 | extremo | 1 |
| 2024-09-14 | 4 | 18 | 33.7 | 19.3 | 21 | 11.6 | 33.5 | 0 | 53 | extremo | 1 |
| 2024-09-15 | 0 | 0 | 34.1 | 18.8 | 24 | 10.3 | 27.4 | 0 | 48.5 | muy_alto | 0 |
| 2024-09-16 | 0 | 0 | 28.2 | 18.2 | 45 | 18.6 | 31.3 | 0 | 31.7 | alto | 0 |
| 2024-09-17 | 0 | 0 | 31.1 | 17.6 | 37 | 16 | 32 | 0 | 28.9 | alto | 0 |
| 2024-09-18 | 0 | 0 | 35.3 | 18.9 | 21 | 9.9 | 24.8 | 0 | 42.2 | muy_alto | 0 |
| 2024-09-19 | 0 | 0 | 33.6 | 20.2 | 25 | 23 | 47.5 | 0.1 | 68.4 | extremo | 0 |
| 2024-09-20 | 0 | 0 | 35.1 | 19.5 | 22 | 15.6 | 36.4 | 0 | 57.3 | extremo | 0 |
| 2024-09-21 | 0 | 0 | 30.6 | 19.2 | 30 | 18.3 | 35.6 | 0 | 39.2 | muy_alto | 0 |
| 2024-09-22 | 0 | 0 | 35.1 | 18.5 | 20 | 10.6 | 26.3 | 0 | 44.1 | muy_alto | 0 |
| 2024-09-23 | 0 | 0 | 37.6 | 20.5 | 14 | 8.8 | 22.7 | 0 | 47.9 | muy_alto | 0 |
| 2024-09-24 | 0 | 0 | 37.4 | 20.4 | 15 | 7 | 18.7 | 0 | 50.5 | extremo | 0 |
It is generated in your browser from this page’s data: one file per fire, aggregated by day and without individual hotspots.
Live widget for your story
It updates itself while the fire is still active and links to this page. Free, with the attribution shown at the bottom.
Sources for this page: GWIS (Copernicus), NASA FIRMS (VIIRS), ERA5 (ECMWF/Copernicus C3S) · Open-Meteo.com (CC BY 4.0), GHSL (JRC). Open-Meteo.com · How we build fire pages: methodology
- Burnt area
- 12,368ha
- GWIS perimeter (Copernicus)
- Duration
- 7days
- 8 Sept 2024 – 14 Sept 2024
- Municipalities hit
- 2
- municipalities
- Started on
- 8 Sept
- 2024
- Heat detections
- 466
- in a single hotspot: 113 MW
- Danger at start
- 78
- Very extreme · FWI index
- Average daily power
- 691MW
- detected power per day, on average
Where it burned
HOTSPOTS BY DAY
8 Sept14 Sept
14 Sept 2024
How it evolved, day by day
8 Sept
10 Sept
12 Sept
14 Sept
Fire radiative power detected each day, in megawatts, and number of hotspots. The magenta bar marks the peak day.
The weather it burned in
35°high
44km/h · peak gust
12%lowest humidity
It had gone more than two months without rain (1 mm or more) when it started.
This area had burned before
11% of the perimeter overlaps earlier fires recorded since 2016: 1,378 ha in 2018.
How big is it?
London boundary: geoBoundaries · Office for National Statistics (Open Government Licence v3.0).
Paris boundary: geoBoundaries · Institut national de l'information géographique et forestière (IGN-F) (Etalab Open License 2.0).
Madrid boundary: geoBoundaries · Open Data ESRI, IGN Central Registry of Cartography Area (CC BY 4.0).
Berlin boundary: geoBoundaries · Federal Agency for Cartography and Geodesy (dl-de/by-2-0).
This compares size, not location: both shapes are at the same scale, north up, centred on each other.
What happened to each town
-
Serranópolis 8,027 inhabitants11,382 ha reached on 8 Sept2.0 %
-
1,037 ha reached on 8 Sept0.1 %
Burnt area inside each municipality, from crossing the GWIS perimeter with administrative boundaries. The distance runs from the point marking the centre of each area to the nearest fire: staying a kilometre away does not mean it reached the houses.
People and buildings inside the perimeter
GHSL 2025Built-up area1.4 ha
Residents≈ 20
Inside the perimeter there were about 1.4 hectares of built-up land and about 20 residents (GHSL 2025, satellite-based estimate).
This is an estimate on 100 m cells, made from satellite imagery and census data: it does not mean that homes burned or that anyone was harmed. The perimeter also contains land that never burned. The GHSL 2025 epoch is a projection made from 2020 and earlier data.
Source: Global Human Settlement Layer (GHS-BUILT-S and GHS-POP R2023A), European Commission Joint Research Centre (JRC), © European Union, CC BY 4.0. Sum inside the perimeter computed by WorldFires. human-settlement.emergency.copernicus.eu
The weather day by day
ECMWF ERA5 reanalysis at the fire location, the standard reference for past weather, and the Canadian Fire Weather Index (the same system Copernicus uses), computed by WorldFires from that data. Days after the fire run until the first rain.
Open-Meteo.com (CC BY 4.0) · Copernicus Climate Change Service (ERA5)
Started with Very dry air: 6.3 % of the area in Brazil 60 days without rain: 55 % of the area in Brazil
| Day | High | Min. humidity | Peak gust | Rain | Danger (FWI) |
|---|---|---|---|---|---|
| 8 Sept | 34.8 °C | 12 % | 44 km/h | 0.0 mm | Very extreme 78 |
| 9 Sept | 33.3 °C | 14 % | 37 km/h | 0.0 mm | Extreme 64 |
| 10 Sept | 33.9 °C | 15 % | 32 km/h | 0.0 mm | Extreme 63 |
| 11 Sept | 34.2 °C | 15 % | 39 km/h | 0.0 mm | Very extreme 72 |
| 12 Sept | 34.7 °C | 15 % | 28 km/h | 0.0 mm | Extreme 60 |
| 13 Sept | 35.2 °C | 16 % | 29 km/h | 0.0 mm | Extreme 58 |
| 14 Sept | 33.7 °C | 21 % | 34 km/h | 0.0 mm | Extreme 53 |
| 15 Sept after | 34.1 °C | 24 % | 27 km/h | 0.0 mm | Very high 48 |
| 16 Sept after | 28.2 °C | 45 % | 31 km/h | 0.0 mm | High 32 |
| 17 Sept after | 31.1 °C | 37 % | 32 km/h | 0.0 mm | High 29 |
| 18 Sept after | 35.3 °C | 21 % | 25 km/h | 0.0 mm | Very high 42 |
| 19 Sept after | 33.6 °C | 25 % | 48 km/h | 0.1 mm | Extreme 68 |
| 20 Sept after | 35.1 °C | 22 % | 36 km/h | 0.0 mm | Extreme 57 |
| 21 Sept after | 30.6 °C | 30 % | 36 km/h | 0.0 mm | Very high 39 |
| 22 Sept after | 35.1 °C | 20 % | 26 km/h | 0.0 mm | Very high 44 |
| 23 Sept after | 37.6 °C | 14 % | 23 km/h | 0.0 mm | Very high 48 |
| 24 Sept after | 37.4 °C | 15 % | 19 km/h | 0.0 mm | Extreme 50 |
Its twins: fires that started in the same weather
It started with an FWI of 78.4, a minimum humidity of 12% and more than two months without rain. Fires in the area that started in weather like this since 2016: 26.
FWI at the start
78.4
Minimum humidity
12 %
Days without rain
60+
this fire
chosen twins
rest of the area
Almost identicalSimilar
Outlines of the closest twins
This fire · Jataí fire, 8 September 2024
12,368 ha
7 days
FWI 78.4
Min. humidity 12 %
Pedra Preta fire, August 2024
7,414 ha
4 days
FWI 76.8
Min. humidity 12 %
221 km away, in 2024
First rain (1 mm or more) after it ended: none in the following ten days.
Jaupaci fire, September 2019
5,522 ha
9 days
FWI 76.3
Min. humidity 12 %
228 km away, in 2019
First rain (1 mm or more) after it ended: none in the following ten days.
Pedro Gomes fire, September 2020
3,443 ha
5 days
FWI 73.7
Min. humidity 11 %
240 km away, in 2020
First rain (1 mm or more) after it ended: none in the following ten days.
Indiara fire, September 2019
10,441 ha
4 days
FWI 78.8
Min. humidity 12 %
237 km away, in 2019
First rain (1 mm or more) after it ended: 4.1 mm on 25 Sept.
Chapadão do Céu fire, August 2024
8,678 ha
5 days
FWI 80.3
Min. humidity 19 %
61 km away, in 2024
First rain (1 mm or more) after it ended: none in the following ten days.
What happened to them
- 5 days
- median duration
- 4,329 ha
- median area
- 19 %
- went past 10,000 ha
- 10.1 mm
- rain at the end (median; 17 of 26 had it)
It was 2.9 times larger than the median of its twins and lasted 7 days, against 5 days.
Only 3 of its 26 twins burned more. The weather on the first day does not explain everything: the wind in the following days, the fuel and the firefighting also count. In 9 of 26, not even 1 mm fell in the ten days after the end: they went out without rain. In the rest, the first rainy day brought a median of 10.1 mm.
This is a bank of analogues: it shows what usually happens, not what will happen. With fewer than 15 twins we give no figures. How we calculate it
How it ended
—first rain
—no rain in ten days
44km/h · max. gust
It was considered over on 14 Sept, and not even 1 mm fell in the following ten days: it went out without rain. Twins with rain when they ended: 17 of 26, with a median of 10.1 mm.
Weather on this page: Open-Meteo.com (CC BY 4.0) · Copernicus Climate Change Service (ERA5)
How a twin is chosen
- Same area: fires that have already ended, less than 250 km from this one, since 2016.
- Same start: we compare the FWI on the first day, the minimum humidity that day and the run of days without rain before it. The slider sets how much they may differ.
- Only pages with final weather data (ERA5 reanalysis) calculated in the same way as this fire’s; agricultural and grass burns and pages with data under review are left out.
- Fires burning at the same time as this one (a week before or after) are left out: they share the same spell of weather and do not count as a precedent.
- They are sorted by similarity, and the outlines of the first five are drawn.
Before and after, from space
Drag the line to compare the same ground before the fire and after it.
↔
Before · 1 Sept 2024
After · 21 Sept 2024
Sentinel-2 did not pass over on that day. Try another date, or use false colour, which is daily.
If the day is cloudy, change the date: each satellite passes once a day. In false colour the burnt ground looks brown or red.
The smoke
CAMS · CopernicusOn 10 September 2024 the air beside the fire reached 100 µg/m³ of PM2.5. That day averaged 63: 4.2 times the WHO daily guideline (15).
PM2.5 peak100 µg/m³
Days over the guideline10 days
PM10142 µg/m³
Optical depth2.59
WHO 15
3 Sept6 Sept9 Sept12 Sept15 Sept
Good
Fair
Moderate
Poor
Very poor
Extremely poor
Particles from the Copernicus CAMS model at the centre of the perimeter; these are not measurements in each town. The pale bar is the worst hour, the solid one the daily average.
Open-Meteo.com (CC BY 4.0) · Copernicus Atmosphere Monitoring Service (CAMS)
Detections table · 466Every satellite heat detection, one by one, with time, satellite, power and coordinates.
⬇ Download CSV
Times in UTC. Each detection is a 375 m pixel: a large fire yields hundreds per pass.
| Date and time | Satellite | FRP (MW) | Lat | Lon |
|---|
Other fires nearby
Frequently asked questions
- How long did the Jataí fire last?
- GWIS (Copernicus) dates it between 8 September 2024 and 14 September 2024: 7 days between the first and last heat detection of the perimeter.
- How much area did it burn?
- The perimeter GWIS (Copernicus) rebuilt from heat detections is 12,368 hectares (123.7 km²). It is an estimate: official national figures may differ.
- Which municipalities burned?
- The fire entered 2 municipalities: Serranópolis (11,382 ha, 2.0 %); Jataí (1,037 ha, 0.1 %).
- What was the weather like?
- During the fire the temperature reached 35.2 °C, humidity dropped to 12 % and gusts hit 44 km/h. The fire danger index (FWI) reached 78, class Very extreme.
- Where does this data come from?
- From the GWIS (Copernicus) burnt perimeter, NASA FIRMS VIIRS hotspots and the administrative boundaries of Brazil (geoBoundaries). It is not an official report.
- How did the fires that started in similar weather in this area end?
- Fires less than 250 km away that started since 2016 with a similar FWI, humidity and dry spell: 26. Their median duration was 5 days and their median area 4,329 ha; 19 % went past 10,000 ha. Only 3 of its 26 twins burned more. The weather on the first day does not explain everything: the wind in the following days, the fuel and the firefighting also count. In 9 of 26, not even 1 mm fell in the ten days after the end: they went out without rain. In the rest, the first rainy day brought a median of 10.1 mm.
Where to verify it
A satellite detection is not an official report. Final figures and the fire’s status are published by each country’s emergency service.
Emergency number: 193 · Emergency number and official warnings
Satellite cross-check
History of this page Changes in area, dates, name, official record or merged pages, compared every night since 24 October 2026.
No changes since 24 October 2026.
RSS Changes to this page With cross-checks and a citable version
Does something look wrong on this page?
This page is built from satellite data and official records, and it sometimes gets things wrong: the wrong dates, the wrong town, two fires merged into one, or something that was not a wildfire at all. If you know this fire first-hand (you live nearby, saw it, fought it or reported on it), tell us what really happened and we will check it.
Report an error
How we know this
- Perimeter: GWIS (Copernicus), rebuilt from heat detections rather than mapped on imagery.
- Dates from the perimeter: the VIIRS detections inside it did not change them. 466 Suomi-NPP VIIRS detections on those dates.
- We have not matched this page with any official record.
- Weather: Copernicus ERA5 reanalysis at the fire location, in cells of about 25 km.
- Built-up area and population come from the JRC Global Human Settlement Layer (epoch 2025, 100 m cells), summed inside the perimeter: an estimate of what was there, not a damage count.
Where this data comes from
The perimeter comes from the Copernicus Global Wildfire Information System (GWIS), which rebuilds it from MODIS and VIIRS heat detections and publishes it under CC BY 4.0. It is not measured on imagery as in Europe, so it is an estimate. Heat detections come from the VIIRS sensors aboard Suomi-NPP and NOAA-20, distributed by NASA FIRMS at 375 m resolution. Municipal boundaries come from geoBoundaries ADM2 (Creative Commons Attribution 3.0 Intergovernmental Organisations (CC BY 3.0 IGO)). The area per municipality is computed by WorldFires by crossing the perimeter with those boundaries, so it may differ from each country’s official figure.