Skip to content
worldfires
BW · Botswana · –

Hukunsti fire, 5 October 2022 Hukunsti

Out · last detection 8 Oct 2022, 12:33 UTC

The fire started on 5 October 2022 in Hukunsti, Botswana, and satellites saw it burning for 4 days. Copernicus’s global GWIS system rebuilt a burnt perimeter of 5,476 hectares from heat detections, spread across a single municipality.

It is the 127th largest in Kgalagadi since 2016 (of 378 with a page). Number 100 in Botswana in 2022, of 327.

Burnt area
5,476ha
GWIS perimeter (Copernicus)
Duration
4days
5 Oct 2022 – 8 Oct 2022
Municipalities hit
1
subdistricts
Started on
5 Oct
2022
Heat detections
172
in a single hotspot: 101 MW
Danger at start
77
Very extreme · FWI index
Average daily power
950MW
detected power per day, on average

Where it burned

HOTSPOTS BY DAY 5 Oct8 Oct
8 Oct 2022

How it evolved, day by day

5 Oct 2022 · 47 MW · 4 6 Oct 2022 · 2,830 MW · 102 7 Oct 2022 · 876 MW · 60 8 Oct 2022 · 47 MW · 6
5 Oct 6 Oct 7 Oct 8 Oct

Fire radiative power detected each day, in megawatts, and number of hotspots. The magenta bar marks the peak day.

The weather it burned in

38°high
55km/h · peak gust
9%lowest humidity

It had gone more than two months without rain (1 mm or more) when it started. Rain came after the fire: 12.2 mm on 17 Oct.

This area had burned before

No earlier perimeters overlap this fire since 2016, when the satellite record begins.

How big is it?

10 km
It burned the equivalent of 3.5% of the area of London (55 km² against 1,583 km²).

London boundary: geoBoundaries · Office for National Statistics (Open Government Licence v3.0).

This compares size, not location: both shapes are at the same scale, north up, centred on each other.

What happened to each town

  1. Hukunsti where it started
    5,483 ha reached on 5 Oct
    0.1 %

Burnt area inside each municipality, from crossing the GWIS perimeter with administrative boundaries. The distance runs from the point marking the centre of each area to the nearest fire: staying a kilometre away does not mean it reached the houses.

People and buildings inside the perimeter

GHSL 2020
Built-up area< 0.1 ha
Residents< 20

Inside the perimeter there was no noticeable built-up land and almost nobody lived there (GHSL 2020, satellite-based estimate).

This is an estimate on 100 m cells, made from satellite imagery and census data: it does not mean that homes burned or that anyone was harmed. The perimeter also contains land that never burned.

Source: Global Human Settlement Layer (GHS-BUILT-S and GHS-POP R2023A), European Commission Joint Research Centre (JRC), © European Union, CC BY 4.0. Sum inside the perimeter computed by WorldFires. human-settlement.emergency.copernicus.eu

The weather day by day

ECMWF ERA5 reanalysis at the fire location, the standard reference for past weather, and the Canadian Fire Weather Index (the same system Copernicus uses), computed by WorldFires from that data. Days after the fire run until the first rain.

Open-Meteo.com (CC BY 4.0) · Copernicus Climate Change Service (ERA5)

Started with Strong wind: 9.5 % of the area in Botswana Very dry air: 63 % of the area in Botswana 60 days without rain: 71 % of the area in Botswana

Day High Min. humidity Peak gust Rain Danger (FWI)
5 Oct 37.7 °C 9 % 52 km/h 0.0 mm Very extreme 77
6 Oct 37.5 °C 11 % 41 km/h 0.0 mm Extreme 66
7 Oct 36.5 °C 10 % 32 km/h 0.0 mm Extreme 54
8 Oct 35.7 °C 12 % 55 km/h 0.0 mm Very extreme 82
9 Oct after 35.0 °C 9 % 44 km/h 0.0 mm Very extreme 70
10 Oct after 35.5 °C 8 % 50 km/h 0.0 mm Very extreme 75
11 Oct after 34.5 °C 13 % 56 km/h 0.0 mm Very extreme 83
12 Oct after 34.5 °C 11 % 51 km/h 0.0 mm Very extreme 77
13 Oct after 35.2 °C 9 % 50 km/h 0.0 mm Very extreme 76
14 Oct after 35.7 °C 10 % 42 km/h 0.0 mm Extreme 68
15 Oct after 36.4 °C 11 % 54 km/h 0.0 mm Very extreme 81
16 Oct after 30.7 °C 20 % 42 km/h 0.0 mm Extreme 57
17 Oct after 24.5 °C 37 % 35 km/h 12.2 mm Low 6

Its twins: fires that started in the same weather

It started with an FWI of 76.8, a minimum humidity of 9% and more than two months without rain. Fires in the area that started in weather like this since 2016: 30.

FWI at the start 76.8
Minimum humidity 9 %
Days without rain 60+
this fire chosen twins rest of the area
Almost identicalSimilar

Outlines of the closest twins

Ghanzi fire, September 2020
2,705 ha 6 days FWI 75.3 Min. humidity 9 % 77 km away, in 2020

First rain (1 mm or more) after it ended: 4.4 mm on 6 Oct.

What happened to them

3 days
median duration
5,046 ha
median area
23 %
went past 10,000 ha
6.0 mm
rain at the end (median; 13 of 30 had it)

It burned an area similar to its twins (5,476 ha against a median of 5,046 ha) and lasted 4 days, against 3 days.

In 17 of 30, not even 1 mm fell in the ten days after the end: they went out without rain. In the rest, the first rainy day brought a median of 6.0 mm.

This is a bank of analogues: it shows what usually happens, not what will happen. With fewer than 15 twins we give no figures. How we calculate it

How it ended

12.2 mmfirst rain
17 Oct9 days after it ended
55km/h · max. gust

It was considered over on 8 Oct, and on 17 Oct 12.2 mm fell. We do not know whether the rain or the firefighters put it out. Twins with rain when they ended: 13 of 30, with a median of 6.0 mm.

Weather on this page: Open-Meteo.com (CC BY 4.0) · Copernicus Climate Change Service (ERA5)

How a twin is chosen

  • Same area: fires that have already ended, less than 250 km from this one, since 2016.
  • Same start: we compare the FWI on the first day, the minimum humidity that day and the run of days without rain before it. The slider sets how much they may differ.
  • Only pages with final weather data (ERA5 reanalysis) calculated in the same way as this fire’s; agricultural and grass burns and pages with data under review are left out.
  • Fires burning at the same time as this one (a week before or after) are left out: they share the same spell of weather and do not count as a precedent.
  • They are sorted by similarity, and the outlines of the first five are drawn.

How we calculate it

Before and after, from space

Drag the line to compare the same ground before the fire and after it.

Before · 28 Sept 2022
After · 15 Oct 2022

If the day is cloudy, change the date: each satellite passes once a day. In false colour the burnt ground looks brown or red.

The smoke

CAMS · Copernicus

On 8 October 2022 the air beside the fire reached 170 µg/m³ of PM2.5. That day averaged 72: 4.8 times the WHO daily guideline (15).

PM2.5 peak170 µg/m³
Days over the guideline6 days
PM10244 µg/m³
Optical depth1.36
3 Oct5 Oct7 Oct9 Oct11 Oct
Good Fair Moderate Poor Very poor Extremely poor

Particles from the Copernicus CAMS model at the centre of the perimeter; these are not measurements in each town. The pale bar is the worst hour, the solid one the daily average.

Open-Meteo.com (CC BY 4.0) · Copernicus Atmosphere Monitoring Service (CAMS)

Detections table · 172Every satellite heat detection, one by one, with time, satellite, power and coordinates.
⬇ Download CSV Times in UTC. Each detection is a 375 m pixel: a large fire yields hundreds per pass.
Date and timeSatelliteFRP (MW)LatLon

Other fires nearby

All fires in Botswana

Frequently asked questions

How long did the Hukunsti fire last?
GWIS (Copernicus) dates it between 5 October 2022 and 8 October 2022: 4 days between the first and last heat detection of the perimeter.
How much area did it burn?
The perimeter GWIS (Copernicus) rebuilt from heat detections is 5,476 hectares (54.8 km²). It is an estimate: official national figures may differ.
Which municipalities burned?
The fire only entered Hukunsti (5,483 ha, 0.1 %).
What was the weather like?
During the fire the temperature reached 37.7 °C, humidity dropped to 9 % and gusts hit 55 km/h. The fire danger index (FWI) reached 82, class Very extreme.
Where does this data come from?
From the GWIS (Copernicus) burnt perimeter, NASA FIRMS VIIRS hotspots and the administrative boundaries of Botswana (geoBoundaries). It is not an official report.
How did the fires that started in similar weather in this area end?
Fires less than 250 km away that started since 2016 with a similar FWI, humidity and dry spell: 30. Their median duration was 3 days and their median area 5,046 ha; 23 % went past 10,000 ha. In 17 of 30, not even 1 mm fell in the ten days after the end: they went out without rain. In the rest, the first rainy day brought a median of 6.0 mm.

Where to verify it

A satellite detection is not an official report. Final figures and the fire’s status are published by each country’s emergency service.

Satellite cross-check

History of this page Changes in area, dates, name, official record or merged pages, compared every night since 24 October 2026.

Does something look wrong on this page?

This page is built from satellite data and official records, and it sometimes gets things wrong: the wrong dates, the wrong town, two fires merged into one, or something that was not a wildfire at all. If you know this fire first-hand (you live nearby, saw it, fought it or reported on it), tell us what really happened and we will check it.

Report an error
What do you think is wrong?

We will only use your email to reply about this report. Privacy.

How we know this
  • Perimeter: GWIS (Copernicus), rebuilt from heat detections rather than mapped on imagery.
  • Dates from the perimeter: the VIIRS detections inside it did not change them. 172 Suomi-NPP VIIRS detections on those dates.
  • We have not matched this page with any official record.
  • Weather: Copernicus ERA5 reanalysis at the fire location, in cells of about 25 km.
  • Built-up area and population come from the JRC Global Human Settlement Layer (epoch 2020, 100 m cells), summed inside the perimeter: an estimate of what was there, not a damage count.

How we build fire pages: methodology

Where this data comes from

The perimeter comes from the Copernicus Global Wildfire Information System (GWIS), which rebuilds it from MODIS and VIIRS heat detections and publishes it under CC BY 4.0. It is not measured on imagery as in Europe, so it is an estimate. Heat detections come from the VIIRS sensors aboard Suomi-NPP and NOAA-20, distributed by NASA FIRMS at 375 m resolution. Municipal boundaries come from geoBoundaries ADM2 (Public Domain). The area per municipality is computed by WorldFires by crossing the perimeter with those boundaries, so it may differ from each country’s official figure.