Skip to content
worldfires
BR · Brazil · –

Hugo Napoleão fire, October 2016 Hugo Napoleão, Jardim do Mulato

Out · last detection 19 Oct 2016, 15:36 UTC

The fire started on 10 October 2016 in Hugo Napoleão, Brazil, and satellites saw it burning for 10 days. Copernicus’s global GWIS system rebuilt a burnt perimeter of 8,232 hectares from heat detections, spread across 2 municipalities.

It is the 132th largest in Piaui since 2016 (of 665 with a page). Number 132 in Brazil in 2016, of 648.

Burnt area
8,232ha
GWIS perimeter (Copernicus)
Duration
10days
10 Oct 2016 – 19 Oct 2016
Municipalities hit
2
municipalities
Started on
10 Oct
2016
Heat detections
316
in a single hotspot: 80 MW
Danger at start
42
Very high · FWI index
Average daily power
424MW
detected power per day, on average

Where it burned

HOTSPOTS BY DAY 10 Oct19 Oct
19 Oct 2016

How it evolved, day by day

10 Oct 2016 · 7 MW · 2 11 Oct 2016 · 217 MW · 13 12 Oct 2016 · 227 MW · 23 13 Oct 2016 · 104 MW · 6 14 Oct 2016 · 323 MW · 39 15 Oct 2016 · 579 MW · 44 16 Oct 2016 · 986 MW · 40 17 Oct 2016 · 1,092 MW · 95 18 Oct 2016 · 562 MW · 34 19 Oct 2016 · 139 MW · 20
10 Oct 12 Oct 14 Oct 17 Oct

Fire radiative power detected each day, in megawatts, and number of hotspots. The magenta bar marks the peak day.

The weather it burned in

39°high
50km/h · peak gust
18%lowest humidity

It had gone 2 days without rain (1 mm or more) when it started. Rain came after the fire: 4.2 mm on 20 Oct.

This area had burned before

No earlier perimeters overlap this fire since 2016, when the satellite record begins.

How big is it?

10 km
It burned the equivalent of 5.2% of the area of London (82 km² against 1,583 km²).

London boundary: geoBoundaries · Office for National Statistics (Open Government Licence v3.0).

This compares size, not location: both shapes are at the same scale, north up, centred on each other.

What happened to each town

  1. Hugo Napoleão 3,518 inhabitants where it started
    5,787 ha reached on 10 Oct
    26 %
  2. Jardim do Mulato 4,180 inhabitants
    2,499 ha reached on 14 Oct
    4.9 %

Burnt area inside each municipality, from crossing the GWIS perimeter with administrative boundaries. The distance runs from the point marking the centre of each area to the nearest fire: staying a kilometre away does not mean it reached the houses.

People and buildings inside the perimeter

GHSL 2015
Built-up area0.78 ha
Residents≈ 50

Inside the perimeter there were about 0.78 hectares of built-up land and about 50 residents (GHSL 2015, satellite-based estimate).

This is an estimate on 100 m cells, made from satellite imagery and census data: it does not mean that homes burned or that anyone was harmed. The perimeter also contains land that never burned.

Source: Global Human Settlement Layer (GHS-BUILT-S and GHS-POP R2023A), European Commission Joint Research Centre (JRC), © European Union, CC BY 4.0. Sum inside the perimeter computed by WorldFires. human-settlement.emergency.copernicus.eu

The weather day by day

ECMWF ERA5 reanalysis at the fire location, the standard reference for past weather, and the Canadian Fire Weather Index (the same system Copernicus uses), computed by WorldFires from that data. Days after the fire run until the first rain.

Open-Meteo.com (CC BY 4.0) · Copernicus Climate Change Service (ERA5)

Day High Min. humidity Peak gust Rain Danger (FWI)
10 Oct 38.4 °C 22 % 37 km/h 0.0 mm Very high 42
11 Oct 37.4 °C 18 % 46 km/h 0.0 mm Extreme 59
12 Oct 37.2 °C 23 % 47 km/h 0.0 mm Extreme 58
13 Oct 37.2 °C 26 % 50 km/h 0.0 mm Extreme 59
14 Oct 38.1 °C 23 % 42 km/h 0.0 mm Extreme 54
15 Oct 37.5 °C 25 % 38 km/h 0.0 mm Extreme 53
16 Oct 38.5 °C 22 % 37 km/h 0.0 mm Extreme 54
17 Oct 37.2 °C 27 % 32 km/h 0.0 mm Very high 50
18 Oct 37.6 °C 28 % 38 km/h 0.0 mm Very high 50
19 Oct 38.8 °C 27 % 34 km/h 0.0 mm Very high 44
20 Oct after 36.3 °C 38 % 30 km/h 4.2 mm Moderate 13

Its twins: fires that started in the same weather

It started with an FWI of 41.8, a minimum humidity of 22% and 2 days without rain. Fires in the area that started in weather like this since 2016: 20.

FWI at the start 41.8
Minimum humidity 22 %
Days without rain 2
this fire chosen twins rest of the area
Almost identicalSimilar

Outlines of the closest twins

São José do Peixe fire, October 2020
3,421 ha 9 days FWI 43.8 Min. humidity 23 % 150 km away, in 2020

First rain (1 mm or more) after it ended: 12.7 mm on 27 Oct.

What happened to them

12 days
median duration
4,391 ha
median area
10 %
went past 10,000 ha
1.2 mm
rain at the end (median; 10 of 20 had it)

It was 1.9 times larger than the median of its twins and lasted 10 days, against 12 days.

Only 2 of its 20 twins burned more. The weather on the first day does not explain everything: the wind in the following days, the fuel and the firefighting also count. In 10 of 20, not even 1 mm fell in the ten days after the end: they went out without rain. In the rest, the first rainy day brought a median of 1.2 mm.

This is a bank of analogues: it shows what usually happens, not what will happen. With fewer than 15 twins we give no figures. How we calculate it

How it ended

4.2 mmfirst rain
20 Octthe day after it ended
50km/h · max. gust

It was considered over on 19 Oct, and on 20 Oct 4.2 mm fell. We do not know whether the rain or the firefighters put it out. Twins with rain when they ended: 10 of 20, with a median of 1.2 mm.

Weather on this page: Open-Meteo.com (CC BY 4.0) · Copernicus Climate Change Service (ERA5)

How a twin is chosen

  • Same area: fires that have already ended, less than 250 km from this one, since 2016.
  • Same start: we compare the FWI on the first day, the minimum humidity that day and the run of days without rain before it. The slider sets how much they may differ.
  • Only pages with final weather data (ERA5 reanalysis) calculated in the same way as this fire’s; agricultural and grass burns and pages with data under review are left out.
  • Fires burning at the same time as this one (a week before or after) are left out: they share the same spell of weather and do not count as a precedent.
  • They are sorted by similarity, and the outlines of the first five are drawn.

How we calculate it

Before and after, from space

Drag the line to compare the same ground before the fire and after it.

Before · 3 Oct 2016
After · 26 Oct 2016

If the day is cloudy, change the date: each satellite passes once a day. In false colour the burnt ground looks brown or red.

Detections table · 316Every satellite heat detection, one by one, with time, satellite, power and coordinates.
⬇ Download CSV Times in UTC. Each detection is a 375 m pixel: a large fire yields hundreds per pass.
Date and timeSatelliteFRP (MW)LatLon

Other fires nearby

All fires in Brazil

Frequently asked questions

How long did the Hugo Napoleão fire last?
According to the heat detections seen by satellite inside the perimeter, it burned from 10 October 2016 to 19 October 2016 (10 days). The perimeter dates it from 11 October 2016 to 19 October 2016.
How much area did it burn?
The perimeter GWIS (Copernicus) rebuilt from heat detections is 8,232 hectares (82.3 km²). It is an estimate: official national figures may differ.
Which municipalities burned?
The fire entered 2 municipalities: Hugo Napoleão (5,787 ha, 26 %); Jardim do Mulato (2,499 ha, 4.9 %).
What was the weather like?
During the fire the temperature reached 38.8 °C, humidity dropped to 18 % and gusts hit 50 km/h. The fire danger index (FWI) reached 59, class Extreme.
Where does this data come from?
From the GWIS (Copernicus) burnt perimeter, NASA FIRMS VIIRS hotspots and the administrative boundaries of Brazil (geoBoundaries). It is not an official report.
How did the fires that started in similar weather in this area end?
Fires less than 250 km away that started since 2016 with a similar FWI, humidity and dry spell: 20. Their median duration was 12 days and their median area 4,391 ha; 10 % went past 10,000 ha. Only 2 of its 20 twins burned more. The weather on the first day does not explain everything: the wind in the following days, the fuel and the firefighting also count. In 10 of 20, not even 1 mm fell in the ten days after the end: they went out without rain. In the rest, the first rainy day brought a median of 1.2 mm.

Where to verify it

A satellite detection is not an official report. Final figures and the fire’s status are published by each country’s emergency service.

Emergency number: 193 · Emergency number and official warnings

Satellite cross-check

History of this page · 1 Changes in area, dates, name, official record or merged pages, compared every night since 24 October 2026.
  1. Start date: 11 October 2016 → 10 October 2016.

RSS Changes to this page With cross-checks and a citable version

Does something look wrong on this page?

This page is built from satellite data and official records, and it sometimes gets things wrong: the wrong dates, the wrong town, two fires merged into one, or something that was not a wildfire at all. If you know this fire first-hand (you live nearby, saw it, fought it or reported on it), tell us what really happened and we will check it.

Report an error
What do you think is wrong?

We will only use your email to reply about this report. Privacy. This is not an emergency service: if there is a fire now, call 193.

How we know this
  • Perimeter: GWIS (Copernicus), rebuilt from heat detections rather than mapped on imagery.
  • Dates adjusted with the VIIRS detections inside the perimeter, which said 11 October 2016 to 19 October 2016. 316 Suomi-NPP VIIRS detections on those dates.
  • We have not matched this page with any official record.
  • Weather: Copernicus ERA5 reanalysis at the fire location, in cells of about 25 km.
  • Built-up area and population come from the JRC Global Human Settlement Layer (epoch 2015, 100 m cells), summed inside the perimeter: an estimate of what was there, not a damage count.

How we build fire pages: methodology

Where this data comes from

The perimeter comes from the Copernicus Global Wildfire Information System (GWIS), which rebuilds it from MODIS and VIIRS heat detections and publishes it under CC BY 4.0. It is not measured on imagery as in Europe, so it is an estimate. Heat detections come from the VIIRS sensors aboard Suomi-NPP and NOAA-20, distributed by NASA FIRMS at 375 m resolution. Municipal boundaries come from geoBoundaries ADM2 (Creative Commons Attribution 3.0 Intergovernmental Organisations (CC BY 3.0 IGO)). The area per municipality is computed by WorldFires by crossing the perimeter with those boundaries, so it may differ from each country’s official figure.