Skip to content
worldfires
CN · China · –

Huachuan County fire, April 2025 桦川县 · Huachuan County, Jixian County

Out · last detection 17 Apr 2025, 04:38 UTC

The fire started on 11 April 2025 in Huachuan County, China, and satellites saw it burning for 7 days. Copernicus’s global GWIS system rebuilt a burnt perimeter of 1,017 hectares from heat detections, spread across 2 municipalities.

It is the 914th largest in Heilongjiang Province since 2016 (of 943 with a page). Number 125 in China in 2025, of 131.

Burnt area
1,017ha
GWIS perimeter (Copernicus)
Duration
7days
11 Apr 2025 – 17 Apr 2025
Municipalities hit
2
counties
Started on
11 Apr
2025
Heat detections
44
in a single hotspot: 35 MW
Danger at start
10
Low · FWI index
Average daily power
127MW
detected power per day, on average

Where it burned

HOTSPOTS BY DAY 11 Apr17 Apr
17 Apr 2025

How it evolved, day by day

11 Apr 2025 · 26 MW · 3 14 Apr 2025 · 21 MW · 4 17 Apr 2025 · 336 MW · 37
11 Apr 14 Apr 17 Apr

Fire radiative power detected each day, in megawatts, and number of hotspots. The magenta bar marks the peak day.

The weather it burned in

22°high
59km/h · peak gust
19%lowest humidity

It had gone 9 days without rain (1 mm or more) when it started. Rain came after the fire: 7.1 mm on 18 Apr.

This area had burned before

29% of the perimeter overlaps earlier fires recorded since 2016: 64 ha in 2017, 4 ha in 2019, 246 ha in 2024. Part of it burned more than once, so the yearly figures add up to more than the 299 ha that had burned before.

How big is it?

10 km
It burned the equivalent of 0.6% of the area of London (10 km² against 1,583 km²).

London boundary: geoBoundaries · Office for National Statistics (Open Government Licence v3.0).

This compares size, not location: both shapes are at the same scale, north up, centred on each other.

What happened to each town

  1. Huachuan County 桦川县 where it started
    991 ha reached on 11 Apr
    0.4 %
  2. Jixian County 集贤县
    22 ha
    0.0 %

Burnt area inside each municipality, from crossing the GWIS perimeter with administrative boundaries. The distance runs from the point marking the centre of each area to the nearest fire: staying a kilometre away does not mean it reached the houses.

People and buildings inside the perimeter

GHSL 2025
Built-up area1.5 ha
Residents≈ 50

Inside the perimeter there were about 1.5 hectares of built-up land and about 50 residents (GHSL 2025, satellite-based estimate).

This is an estimate on 100 m cells, made from satellite imagery and census data: it does not mean that homes burned or that anyone was harmed. The perimeter also contains land that never burned. The GHSL 2025 epoch is a projection made from 2020 and earlier data.

Source: Global Human Settlement Layer (GHS-BUILT-S and GHS-POP R2023A), European Commission Joint Research Centre (JRC), © European Union, CC BY 4.0. Sum inside the perimeter computed by WorldFires. human-settlement.emergency.copernicus.eu

The weather day by day

ECMWF ERA5 reanalysis at the fire location, the standard reference for past weather, and the Canadian Fire Weather Index (the same system Copernicus uses), computed by WorldFires from that data. Days after the fire run until the first rain.

Open-Meteo.com (CC BY 4.0) · Copernicus Climate Change Service (ERA5)

Day High Min. humidity Peak gust Rain Danger (FWI)
11 Apr 15.6 °C 31 % 37 km/h 0.3 mm Low 10
12 Apr 21.9 °C 29 % 59 km/h 0.0 mm Moderate 16
13 Apr 16.2 °C 41 % 56 km/h 0.9 mm Low 10
14 Apr 12.9 °C 35 % 39 km/h 2.0 mm Very low 3
15 Apr 11.2 °C 30 % 37 km/h 1.7 mm Very low 2
16 Apr 12.0 °C 24 % 49 km/h 0.0 mm Low 8
17 Apr 16.8 °C 19 % 24 km/h 0.0 mm Low 11
18 Apr after 9.9 °C 48 % 35 km/h 7.1 mm Very low 0

Its twins: fires that started in the same weather

It started with an FWI of 9.5, a minimum humidity of 31% and 9 days without rain. Fires in the area that started in weather like this since 2016: 21.

FWI at the start 9.5
Minimum humidity 31 %
Days without rain 9
this fire chosen twins rest of the area
Almost identicalSimilar

Outlines of the closest twins

Jixian County fire, October 2016
1,338 ha 12 days FWI 8.1 Min. humidity 30 % 59 km away, in 2016

First rain (1 mm or more) after it ended: 5.4 mm on 11 Nov.

What happened to them

6 days
median duration
1,508 ha
median area
100 %
went past 1,000 ha
5.0 mm
rain at the end (median; 20 of 21 had it)

It burned an area similar to its twins (1,017 ha against a median of 1,508 ha) and lasted 7 days, against 6 days.

In 1 of 21, not even 1 mm fell in the ten days after the end: they went out without rain. In the rest, the first rainy day brought a median of 5.0 mm.

This is a bank of analogues: it shows what usually happens, not what will happen. With fewer than 15 twins we give no figures. How we calculate it

How it ended

7.1 mmfirst rain
18 Aprthe day after it ended
59km/h · max. gust

It was considered over on 17 Apr, and on 18 Apr 7.1 mm fell. We do not know whether the rain or the firefighters put it out. Twins with rain when they ended: 20 of 21, with a median of 5.0 mm.

Weather on this page: Open-Meteo.com (CC BY 4.0) · Copernicus Climate Change Service (ERA5)

How a twin is chosen

  • Same area: fires that have already ended, less than 250 km from this one, since 2016.
  • Same start: we compare the FWI on the first day, the minimum humidity that day and the run of days without rain before it. The slider sets how much they may differ.
  • Only pages with final weather data (ERA5 reanalysis) calculated in the same way as this fire’s; agricultural and grass burns and pages with data under review are left out.
  • Fires burning at the same time as this one (a week before or after) are left out: they share the same spell of weather and do not count as a precedent.
  • They are sorted by similarity, and the outlines of the first five are drawn.

How we calculate it

Before and after, from space

Drag the line to compare the same ground before the fire and after it.

Before · 4 Apr 2025
After · 24 Apr 2025

If the day is cloudy, change the date: each satellite passes once a day. In false colour the burnt ground looks brown or red.

The smoke

CAMS · Copernicus

On 12 April 2025 the air beside the fire reached 60 µg/m³ of PM2.5. That day averaged 29: 1.9 times the WHO daily guideline (15).

PM2.5 peak60 µg/m³
Days over the guideline5 days
PM1070 µg/m³
Optical depth1.15
12 Apr14 Apr16 Apr18 Apr20 Apr
Good Fair Moderate Poor Very poor Extremely poor

Particles from the Copernicus CAMS model at the centre of the perimeter; these are not measurements in each town. The pale bar is the worst hour, the solid one the daily average.

Open-Meteo.com (CC BY 4.0) · Copernicus Atmosphere Monitoring Service (CAMS)

Detections table · 44Every satellite heat detection, one by one, with time, satellite, power and coordinates.
⬇ Download CSV Times in UTC. Each detection is a 375 m pixel: a large fire yields hundreds per pass.
Date and timeSatelliteFRP (MW)LatLon

Other fires nearby

All fires in China

Frequently asked questions

How long did the Huachuan County fire last?
According to the heat detections seen by satellite inside the perimeter, it burned from 11 April 2025 to 17 April 2025 (7 days). The perimeter dates it from 14 April 2025 to 17 April 2025.
How much area did it burn?
The perimeter GWIS (Copernicus) rebuilt from heat detections is 1,017 hectares (10.2 km²). It is an estimate: official national figures may differ.
Which municipalities burned?
The fire entered 2 municipalities: Huachuan County (991 ha, 0.4 %); Jixian County (22 ha, 0.0 %).
What was the weather like?
During the fire the temperature reached 21.9 °C, humidity dropped to 19 % and gusts hit 59 km/h. The fire danger index (FWI) reached 16, class Moderate.
Where does this data come from?
From the GWIS (Copernicus) burnt perimeter, NASA FIRMS VIIRS hotspots and the administrative boundaries of China (geoBoundaries). It is not an official report.
How did the fires that started in similar weather in this area end?
Fires less than 250 km away that started since 2016 with a similar FWI, humidity and dry spell: 21. Their median duration was 6 days and their median area 1,508 ha; 100 % went past 1,000 ha. In 1 of 21, not even 1 mm fell in the ten days after the end: they went out without rain. In the rest, the first rainy day brought a median of 5.0 mm.

Where to verify it

A satellite detection is not an official report. Final figures and the fire’s status are published by each country’s emergency service.

Emergency number: 119 · Emergency number and official warnings

Satellite cross-check

History of this page · 1 Changes in area, dates, name, official record or merged pages, compared every night since 24 October 2026.
  1. Start date: 14 April 2025 → 11 April 2025.

RSS Changes to this page With cross-checks and a citable version

Does something look wrong on this page?

This page is built from satellite data and official records, and it sometimes gets things wrong: the wrong dates, the wrong town, two fires merged into one, or something that was not a wildfire at all. If you know this fire first-hand (you live nearby, saw it, fought it or reported on it), tell us what really happened and we will check it.

Report an error
What do you think is wrong?

We will only use your email to reply about this report. Privacy. This is not an emergency service: if there is a fire now, call 119.

How we know this
  • Perimeter: GWIS (Copernicus), rebuilt from heat detections rather than mapped on imagery.
  • Dates adjusted with the VIIRS detections inside the perimeter, which said 14 April 2025 to 17 April 2025. 44 Suomi-NPP VIIRS detections on those dates.
  • We have not matched this page with any official record.
  • Weather: Copernicus ERA5 reanalysis at the fire location, in cells of about 25 km.
  • Built-up area and population come from the JRC Global Human Settlement Layer (epoch 2025, 100 m cells), summed inside the perimeter: an estimate of what was there, not a damage count.

How we build fire pages: methodology

Where this data comes from

The perimeter comes from the Copernicus Global Wildfire Information System (GWIS), which rebuilds it from MODIS and VIIRS heat detections and publishes it under CC BY 4.0. It is not measured on imagery as in Europe, so it is an estimate. Heat detections come from the VIIRS sensors aboard Suomi-NPP and NOAA-20, distributed by NASA FIRMS at 375 m resolution. Municipal boundaries come from geoBoundaries ADM3 (Open Data Commons Open Database License 1.0). The area per municipality is computed by WorldFires by crossing the perimeter with those boundaries, so it may differ from each country’s official figure.