Skip to content
worldfires
BO · Bolivia · –

San Javier fire, 20 September 2021 San Javier, Huacaraje

Out · last detection 12 Oct 2021, 06:16 UTC

The fire started on 20 September 2021 in San Javier, Bolivia, and satellites saw it burning for 22 days. Copernicus’s global GWIS system rebuilt a burnt perimeter of 10,026 hectares from heat detections, spread across 2 municipalities.

It is the 150th largest in Beni since 2016 (of 858 with a page). Number 41 in Bolivia in 2021, of 155.

Burnt area
10,026ha
GWIS perimeter (Copernicus)
Duration
22days
20 Sept 2021 – 11 Oct 2021
Municipalities hit
2
municipalities
Started on
20 Sept
2021
Heat detections
360
in a single hotspot: 136 MW
Danger at start
23
High · FWI index
Average daily power
223MW
detected power per day, on average

Where it burned

HOTSPOTS BY DAY 20 Sept11 Oct
12 Oct 2021

How it evolved, day by day

22 Sept 2021 · 34 MW · 2 24 Sept 2021 · 182 MW · 6 25 Sept 2021 · 63 MW · 8 26 Sept 2021 · 450 MW · 46 27 Sept 2021 · 669 MW · 71 28 Sept 2021 · 51 MW · 15 29 Sept 2021 · 926 MW · 35 30 Sept 2021 · 525 MW · 32 1 Oct 2021 · 330 MW · 56 2 Oct 2021 · 377 MW · 31 3 Oct 2021 · 21 MW · 12 4 Oct 2021 · 21 MW · 12 7 Oct 2021 · 7 MW · 1 8 Oct 2021 · 6 MW · 1 9 Oct 2021 · 4 MW · 5 10 Oct 2021 · 327 MW · 17 11 Oct 2021 · 21 MW · 9 12 Oct 2021 · 2 MW · 1
22 Sept 29 Sept 7 Oct 11 Oct

Fire radiative power detected each day, in megawatts, and number of hotspots. The magenta bar marks the peak day.

The weather it burned in

36°high
47km/h · peak gust
37%lowest humidity

It had gone 4 days without rain (1 mm or more) when it started. Rain came after the fire: 19.5 mm on 15 Oct.

This area had burned before

73% of the perimeter overlaps earlier fires recorded since 2016: 2,924 ha in 2016, 4,629 ha in 2017, 1,579 ha in 2018, 838 ha in 2019, 3,054 ha in 2020. Part of it burned more than once, so the yearly figures add up to more than the 7,326 ha that had burned before.

How big is it?

10 km
It burned the equivalent of 6.3% of the area of London (100 km² against 1,583 km²).

London boundary: geoBoundaries · Office for National Statistics (Open Government Licence v3.0).

This compares size, not location: both shapes are at the same scale, north up, centred on each other.

What happened to each town

  1. San Javier 7,913 inhabitants where it started
    8,435 ha
    1.0 %
  2. Huacaraje 4,630 inhabitants
    1,648 ha
    0.3 %

Burnt area inside each municipality, from crossing the GWIS perimeter with administrative boundaries. The distance runs from the point marking the centre of each area to the nearest fire: staying a kilometre away does not mean it reached the houses.

The weather day by day

ECMWF ERA5 reanalysis at the fire location, the standard reference for past weather, and the Canadian Fire Weather Index (the same system Copernicus uses), computed by WorldFires from that data. Days after the fire run until the first rain.

Open-Meteo.com (CC BY 4.0) · Copernicus Climate Change Service (ERA5)

Day High Min. humidity Peak gust Rain Danger (FWI)
20 Sept 34.9 °C 47 % 32 km/h 0.0 mm High 23
21 Sept 35.4 °C 42 % 32 km/h 3.6 mm High 23
22 Sept 33.2 °C 43 % 30 km/h 0.0 mm Low 6
23 Sept 35.2 °C 38 % 21 km/h 0.2 mm Moderate 15
24 Sept 32.4 °C 40 % 34 km/h 0.0 mm High 26
25 Sept 34.9 °C 37 % 17 km/h 0.0 mm Moderate 19
26 Sept 35.1 °C 43 % 28 km/h 0.0 mm High 26
27 Sept 34.2 °C 49 % 31 km/h 0.2 mm High 27
28 Sept 33.5 °C 53 % 31 km/h 0.2 mm High 24
29 Sept 34.9 °C 47 % 23 km/h 0.9 mm High 21
30 Sept 35.6 °C 44 % 40 km/h 1.1 mm High 25
1 Oct 35.4 °C 46 % 42 km/h 1.2 mm High 25
2 Oct 35.6 °C 47 % 43 km/h 0.3 mm High 25
3 Oct 33.5 °C 51 % 47 km/h 3.6 mm High 28
4 Oct 28.8 °C 67 % 33 km/h 8.4 mm Very low 0
5 Oct 26.6 °C 59 % 27 km/h 1.8 mm Very low 2
6 Oct 33.3 °C 51 % 32 km/h 0.6 mm Low 8
7 Oct 31.8 °C 59 % 31 km/h 1.0 mm Low 8
8 Oct 35.4 °C 45 % 23 km/h 0.5 mm Moderate 14
9 Oct 34.1 °C 55 % 31 km/h 0.3 mm Moderate 17
10 Oct 35.0 °C 49 % 36 km/h 0.0 mm High 22
11 Oct 35.0 °C 49 % 34 km/h 1.3 mm Moderate 21
12 Oct after 34.3 °C 54 % 25 km/h 0.9 mm Low 10
13 Oct after 34.9 °C 51 % 42 km/h 0.0 mm Moderate 20
14 Oct after 35.2 °C 50 % 54 km/h 0.0 mm High 29
15 Oct after 35.9 °C 46 % 52 km/h 19.5 mm High 29

Its twins: fires that started in the same weather

It started with an FWI of 23.1, a minimum humidity of 47% and 4 days without rain. Fires in the area that started in weather like this since 2016: 20.

FWI at the start 23.1
Minimum humidity 47 %
Days without rain 4
this fire chosen twins rest of the area
Almost identicalSimilar

Outlines of the closest twins

Huacaraje fire, October 2020
3,919 ha 4 days FWI 19.3 Min. humidity 47 % 36 km away, in 2020

First rain (1 mm or more) after it ended: 1.9 mm on 6 Oct.

What happened to them

10 days
median duration
3,870 ha
median area
20 %
went past 10,000 ha
4.6 mm
rain at the end (median; 19 of 20 had it)

It was 2.6 times larger than the median of its twins and lasted 22 days, against 10 days.

Only 4 of its 20 twins burned more. The weather on the first day does not explain everything: the wind in the following days, the fuel and the firefighting also count. In 1 of 20, not even 1 mm fell in the ten days after the end: they went out without rain. In the rest, the first rainy day brought a median of 4.6 mm.

This is a bank of analogues: it shows what usually happens, not what will happen. With fewer than 15 twins we give no figures. How we calculate it

How it ended

19.5 mmfirst rain
15 Oct4 days after it ended
47km/h · max. gust

It was considered over on 11 Oct, and on 15 Oct 19.5 mm fell. We do not know whether the rain or the firefighters put it out. Twins with rain when they ended: 19 of 20, with a median of 4.6 mm.

Weather on this page: Open-Meteo.com (CC BY 4.0) · Copernicus Climate Change Service (ERA5)

How a twin is chosen

  • Same area: fires that have already ended, less than 250 km from this one, since 2016.
  • Same start: we compare the FWI on the first day, the minimum humidity that day and the run of days without rain before it. The slider sets how much they may differ.
  • Only pages with final weather data (ERA5 reanalysis) calculated in the same way as this fire’s; agricultural and grass burns and pages with data under review are left out.
  • Fires burning at the same time as this one (a week before or after) are left out: they share the same spell of weather and do not count as a precedent.
  • They are sorted by similarity, and the outlines of the first five are drawn.

How we calculate it

Before and after, from space

Drag the line to compare the same ground before the fire and after it.

Before · 13 Sept 2021
After · 18 Oct 2021

If the day is cloudy, change the date: each satellite passes once a day. In false colour the burnt ground looks brown or red.

Detections table · 360Every satellite heat detection, one by one, with time, satellite, power and coordinates.
⬇ Download CSV Times in UTC. Each detection is a 375 m pixel: a large fire yields hundreds per pass.
Date and timeSatelliteFRP (MW)LatLon

Other fires nearby

All fires in Bolivia

Frequently asked questions

How long did the San Javier fire last?
According to the heat detections seen by satellite inside the perimeter, it burned from 20 September 2021 to 11 October 2021 (22 days). The perimeter dates it from 22 September 2021 to 4 October 2021.
How much area did it burn?
The perimeter GWIS (Copernicus) rebuilt from heat detections is 10,026 hectares (100.3 km²). It is an estimate: official national figures may differ.
Which municipalities burned?
The fire entered 2 municipalities: San Javier (8,435 ha, 1.0 %); Huacaraje (1,648 ha, 0.3 %).
What was the weather like?
During the fire the temperature reached 35.6 °C, humidity dropped to 37 % and gusts hit 47 km/h. The fire danger index (FWI) reached 28, class High.
Where does this data come from?
From the GWIS (Copernicus) burnt perimeter, NASA FIRMS VIIRS hotspots and the administrative boundaries of Bolivia (geoBoundaries). It is not an official report.
How did the fires that started in similar weather in this area end?
Fires less than 250 km away that started since 2016 with a similar FWI, humidity and dry spell: 20. Their median duration was 10 days and their median area 3,870 ha; 20 % went past 10,000 ha. Only 4 of its 20 twins burned more. The weather on the first day does not explain everything: the wind in the following days, the fuel and the firefighting also count. In 1 of 20, not even 1 mm fell in the ten days after the end: they went out without rain. In the rest, the first rainy day brought a median of 4.6 mm.

Where to verify it

A satellite detection is not an official report. Final figures and the fire’s status are published by each country’s emergency service.

Emergency number: 119 · 110 · Emergency number and official warnings

Satellite cross-check

History of this page · 1 Changes in area, dates, name, official record or merged pages, compared every night since 24 October 2026.
  1. Name: Huacaraje → San Javier.

RSS Changes to this page With cross-checks and a citable version

Does something look wrong on this page?

This page is built from satellite data and official records, and it sometimes gets things wrong: the wrong dates, the wrong town, two fires merged into one, or something that was not a wildfire at all. If you know this fire first-hand (you live nearby, saw it, fought it or reported on it), tell us what really happened and we will check it.

Report an error
What do you think is wrong?

We will only use your email to reply about this report. Privacy. This is not an emergency service: if there is a fire now, call 119 · 110.

How we know this
  • Perimeter: GWIS (Copernicus), rebuilt from heat detections rather than mapped on imagery.
  • Dates adjusted with the VIIRS detections inside the perimeter, which said 22 September 2021 to 4 October 2021. 360 Suomi-NPP VIIRS detections on those dates.
  • We have not matched this page with any official record.
  • Weather: Copernicus ERA5 reanalysis at the fire location, in cells of about 25 km.

How we build fire pages: methodology

Where this data comes from

The perimeter comes from the Copernicus Global Wildfire Information System (GWIS), which rebuilds it from MODIS and VIIRS heat detections and publishes it under CC BY 4.0. It is not measured on imagery as in Europe, so it is an estimate. Heat detections come from the VIIRS sensors aboard Suomi-NPP and NOAA-20, distributed by NASA FIRMS at 375 m resolution. Municipal boundaries come from geoBoundaries ADM3 (Public Domain). The area per municipality is computed by WorldFires by crossing the perimeter with those boundaries, so it may differ from each country’s official figure.