Skip to content
worldfires
MM · Myanmar · –

Hpasawng fire, 6 March 2026 Hpasawng, Hpruso, Bawlake

Out · last detection 13 Apr 2026, 19:21 UTC

The fire started on 6 March 2026 in Hpasawng, Myanmar, and satellites saw it burning for 41 days. Copernicus’s global GWIS system rebuilt a burnt perimeter of 31,882 hectares from heat detections, spread across 3 municipalities.

Number 10 in Myanmar in 2026, of 480.

GWIS near-real-time perimeter, from the layer that changed in October 2025: this fire is not compared with fires from earlier years, because since then the GWIS layer gives more and larger perimeters.

Burnt area
31,882ha
GWIS perimeter (Copernicus)
Duration
41days
6 Mar 2026 – 15 Apr 2026
Municipalities hit
3
municipalities
Started on
6 Mar
2026
Heat detections
1,140
in a single hotspot: 234 MW
Danger at start
18
Moderate · FWI index
Average daily power
283MW
detected power per day, on average

Where it burned

HOTSPOTS BY DAY 6 Mar15 Apr
13 Apr 2026

How it evolved, day by day

6 Mar 2026 · 16 MW · 7 7 Mar 2026 · 106 MW · 19 8 Mar 2026 · 92 MW · 32 9 Mar 2026 · 150 MW · 33 10 Mar 2026 · 59 MW · 13 13 Mar 2026 · 0 MW · 0 15 Mar 2026 · 18 MW · 4 16 Mar 2026 · 23 MW · 5 17 Mar 2026 · 106 MW · 44 18 Mar 2026 · 105 MW · 55 19 Mar 2026 · 97 MW · 28 20 Mar 2026 · 184 MW · 11 21 Mar 2026 · 40 MW · 8 22 Mar 2026 · 213 MW · 49 23 Mar 2026 · 706 MW · 70 24 Mar 2026 · 791 MW · 88 25 Mar 2026 · 666 MW · 86 26 Mar 2026 · 692 MW · 49 27 Mar 2026 · 397 MW · 44 28 Mar 2026 · 976 MW · 101 29 Mar 2026 · 412 MW · 71 30 Mar 2026 · 91 MW · 26 31 Mar 2026 · 1,667 MW · 58 1 Apr 2026 · 327 MW · 63 2 Apr 2026 · 1,002 MW · 62 3 Apr 2026 · 341 MW · 62 4 Apr 2026 · 35 MW · 4 5 Apr 2026 · 185 MW · 9 6 Apr 2026 · 101 MW · 11 7 Apr 2026 · 3 MW · 1 8 Apr 2026 · 254 MW · 9 9 Apr 2026 · 10 MW · 3 10 Apr 2026 · 19 MW · 6 11 Apr 2026 · 5 MW · 2 12 Apr 2026 · 7 MW · 1 13 Apr 2026 · 11 MW · 6
6 Mar 17 Mar 25 Mar 31 Mar 10 Apr

Fire radiative power detected each day, in megawatts, and number of hotspots. The magenta bar marks the peak day.

Fire front film How it spread from one satellite pass to the next (71 passes) and with what wind. Watch the film

The weather it burned in

38°high
39km/h · peak gust
31%lowest humidity

It had gone 8 days without rain (1 mm or more) when it started. Rain came after the fire: 1.5 mm on 18 Apr.

This area had burned before

65% of the perimeter overlaps earlier fires recorded since 2016: 3,823 ha in 2016, 1,992 ha in 2017, 17 ha in 2018, 2,585 ha in 2019, 4,576 ha in 2020, 1,472 ha in 2021, 1,549 ha in 2022, 5,626 ha in 2023, 9,335 ha in 2024, 7,077 ha in 2025. Part of it burned more than once, so the yearly figures add up to more than the 20,768 ha that had burned before.

How big is it?

10 km
It burned the equivalent of 20% of the area of London (319 km² against 1,583 km²).

London boundary: geoBoundaries · Office for National Statistics (Open Government Licence v3.0).

This compares size, not location: both shapes are at the same scale, north up, centred on each other.

What happened to each town

  1. Hpasawng where it started
    22,470 ha reached on 6 Mar
    16 %
  2. 6,335 ha reached on 6 Mar
    3.8 %
  3. 3,877 ha reached on 6 Mar
    2.0 %

Burnt area inside each municipality, from crossing the GWIS perimeter with administrative boundaries. The distance runs from the point marking the centre of each area to the nearest fire: staying a kilometre away does not mean it reached the houses.

People and buildings inside the perimeter

GHSL 2025
Built-up area0.12 ha
Residents≈ 40

Inside the perimeter there were about 0.12 hectares of built-up land and about 40 residents (GHSL 2025, satellite-based estimate).

This is an estimate on 100 m cells, made from satellite imagery and census data: it does not mean that homes burned or that anyone was harmed. The perimeter also contains land that never burned. The GHSL 2025 epoch is a projection made from 2020 and earlier data.

Source: Global Human Settlement Layer (GHS-BUILT-S and GHS-POP R2023A), European Commission Joint Research Centre (JRC), © European Union, CC BY 4.0. Sum inside the perimeter computed by WorldFires. human-settlement.emergency.copernicus.eu

The weather day by day

ECMWF ERA5 reanalysis at the fire location, the standard reference for past weather, and the Canadian Fire Weather Index (the same system Copernicus uses), computed by WorldFires from that data. Days after the fire run until the first rain.

Open-Meteo.com (CC BY 4.0) · Copernicus Climate Change Service (ERA5)

Day High Min. humidity Peak gust Rain Danger (FWI)
6 Mar 32.5 °C 55 % 33 km/h 0.3 mm Moderate 18
7 Mar 35.3 °C 43 % 23 km/h 0.0 mm Moderate 18
8 Mar 36.0 °C 40 % 17 km/h 0.0 mm Moderate 18
9 Mar 35.7 °C 42 % 19 km/h 0.0 mm Moderate 20
10 Mar 32.4 °C 59 % 27 km/h 2.7 mm Moderate 18
11 Mar 30.9 °C 55 % 28 km/h 2.8 mm Very low 4
12 Mar 31.1 °C 58 % 21 km/h 1.5 mm Very low 4
13 Mar 28.9 °C 70 % 28 km/h 6.4 mm Very low 2
14 Mar 30.7 °C 60 % 29 km/h 0.5 mm Very low 1
15 Mar 31.7 °C 62 % 26 km/h 1.9 mm Very low 4
16 Mar 32.4 °C 53 % 24 km/h 0.0 mm Very low 4
17 Mar 33.8 °C 43 % 22 km/h 0.0 mm Moderate 12
18 Mar 34.8 °C 42 % 19 km/h 0.0 mm Moderate 14
19 Mar 35.0 °C 42 % 22 km/h 0.0 mm Moderate 15
20 Mar 33.6 °C 46 % 26 km/h 0.4 mm Moderate 15
21 Mar 35.0 °C 52 % 28 km/h 2.9 mm Moderate 17
22 Mar 34.9 °C 42 % 36 km/h 0.1 mm Low 9
23 Mar 35.1 °C 34 % 30 km/h 0.0 mm Moderate 18
24 Mar 35.7 °C 37 % 27 km/h 0.0 mm Moderate 19
25 Mar 36.1 °C 37 % 26 km/h 0.0 mm Moderate 19
26 Mar 36.7 °C 38 % 20 km/h 0.0 mm Moderate 19
27 Mar 37.2 °C 37 % 30 km/h 0.0 mm High 22
28 Mar 37.7 °C 31 % 39 km/h 0.0 mm High 25
29 Mar 37.8 °C 31 % 35 km/h 0.0 mm High 26
30 Mar 37.7 °C 33 % 32 km/h 0.0 mm High 26
31 Mar 38.2 °C 38 % 27 km/h 0.0 mm High 25
1 Apr 38.0 °C 39 % 27 km/h 0.0 mm High 25
2 Apr 38.3 °C 35 % 27 km/h 0.0 mm High 26
3 Apr 38.5 °C 37 % 25 km/h 0.0 mm High 25
4 Apr 37.5 °C 42 % 23 km/h 0.1 mm High 24
5 Apr 37.3 °C 46 % 25 km/h 0.0 mm High 24
6 Apr 37.0 °C 46 % 29 km/h 0.0 mm High 25
7 Apr 35.2 °C 48 % 33 km/h 0.2 mm High 24
8 Apr 37.1 °C 36 % 34 km/h 0.1 mm High 25
9 Apr 36.3 °C 41 % 31 km/h 0.0 mm High 27
10 Apr 36.3 °C 39 % 35 km/h 0.1 mm High 32
11 Apr 36.7 °C 38 % 37 km/h 0.0 mm High 34
12 Apr 37.7 °C 35 % 24 km/h 0.0 mm High 29
13 Apr 38.1 °C 40 % 25 km/h 0.0 mm High 29
14 Apr 37.1 °C 43 % 22 km/h 0.0 mm High 29
15 Apr 36.9 °C 48 % 27 km/h 0.1 mm High 31
16 Apr after 36.7 °C 44 % 24 km/h 0.0 mm High 29
17 Apr after 37.9 °C 40 % 23 km/h 0.0 mm High 28
18 Apr after 36.0 °C 52 % 32 km/h 1.5 mm High 28

Before and after, from space

Drag the line to compare the same ground before the fire and after it.

Before · 27 Feb 2026
After · 22 Apr 2026

If the day is cloudy, change the date: each satellite passes once a day. In false colour the burnt ground looks brown or red.

The smoke

CAMS · Copernicus

On 26 March 2026 the air beside the fire reached 187 µg/m³ of PM2.5. That day averaged 86: 5.7 times the WHO daily guideline (15).

PM2.5 peak187 µg/m³
Days over the guideline36 days
PM10192 µg/m³
Optical depth1.18
11 Mar19 Mar27 Mar4 Apr12 Apr
Good Fair Moderate Poor Very poor Extremely poor

Particles from the Copernicus CAMS model at the centre of the perimeter; these are not measurements in each town. The pale bar is the worst hour, the solid one the daily average.

Open-Meteo.com (CC BY 4.0) · Copernicus Atmosphere Monitoring Service (CAMS)

Detections table · 1,140Every satellite heat detection, one by one, with time, satellite, power and coordinates.
⬇ Download CSV Times in UTC. Each detection is a 375 m pixel: a large fire yields hundreds per pass.
Date and timeSatelliteFRP (MW)LatLon

Other fires nearby

All fires in Myanmar

Frequently asked questions

How long did the Hpasawng fire last?
According to the heat detections seen by satellite inside the perimeter, it burned from 6 March 2026 to 15 April 2026 (41 days). The perimeter dates it from 13 March 2026 to 13 April 2026.
How much area did it burn?
The perimeter GWIS (Copernicus) rebuilt from heat detections is 31,882 hectares (318.8 km²). It is an estimate: official national figures may differ.
Which municipalities burned?
The fire entered 3 municipalities: Hpasawng (22,470 ha, 16 %); Hpruso (6,335 ha, 3.8 %); Bawlake (3,877 ha, 2.0 %).
What was the weather like?
During the fire the temperature reached 38.5 °C, humidity dropped to 31 % and gusts hit 39 km/h. The fire danger index (FWI) reached 34, class High.
Where does this data come from?
From the GWIS (Copernicus) burnt perimeter, NASA FIRMS VIIRS hotspots and the administrative boundaries of Myanmar (geoBoundaries). It is not an official report.

Where to verify it

A satellite detection is not an official report. Final figures and the fire’s status are published by each country’s emergency service.

Satellite cross-check

History of this page · 2 Changes in area, dates, name, official record or merged pages, compared every night since 24 October 2026.
  1. Start date: 13 March 2026 → 6 March 2026.
  2. Last day with fire: 13 April 2026 → 15 April 2026.

RSS Changes to this page With cross-checks and a citable version

Does something look wrong on this page?

This page is built from satellite data and official records, and it sometimes gets things wrong: the wrong dates, the wrong town, two fires merged into one, or something that was not a wildfire at all. If you know this fire first-hand (you live nearby, saw it, fought it or reported on it), tell us what really happened and we will check it.

Report an error
What do you think is wrong?

We will only use your email to reply about this report. Privacy.

How we know this
  • Perimeter: GWIS (Copernicus), rebuilt from heat detections rather than mapped on imagery; 6 polygons grouped in this page.
  • Dates adjusted with the VIIRS detections inside the perimeter, which said 13 March 2026 to 13 April 2026. 1,140 Suomi-NPP VIIRS detections on those dates.
  • We have not matched this page with any official record.
  • Weather: Copernicus ERA5 reanalysis at the fire location, in cells of about 25 km.
  • Built-up area and population come from the JRC Global Human Settlement Layer (epoch 2025, 100 m cells), summed inside the perimeter: an estimate of what was there, not a damage count.

How we build fire pages: methodology

Where this data comes from

The perimeter comes from the Copernicus Global Wildfire Information System (GWIS), which rebuilds it from MODIS and VIIRS heat detections and publishes it under CC BY 4.0. It is not measured on imagery as in Europe, so it is an estimate. Heat detections come from the VIIRS sensors aboard Suomi-NPP and NOAA-20, distributed by NASA FIRMS at 375 m resolution. Municipal boundaries come from geoBoundaries ADM3 (Creative Commons Attribution 4.0 (CC BY 4.0)). The area per municipality is computed by WorldFires by crossing the perimeter with those boundaries, so it may differ from each country’s official figure.