Skip to content
worldfires
MX · Mexico · –

Hopelchén fire, 1 May 2024 Hopelchén, José María Morelos

Out · last detection 13 May 2024, 18:59 UTC

The fire started on 1 May 2024 in Hopelchén, Mexico, and satellites saw it burning for 13 days. Copernicus’s global GWIS system rebuilt a burnt perimeter of 1,523 hectares from heat detections, spread across 2 municipalities.

It is the 118th largest in Campeche since 2016 (of 124 with a page). Number 285 in Mexico in 2024, of 289.

Burnt area
1,523ha
GWIS perimeter (Copernicus)
Duration
13days
1 May 2024 – 13 May 2024
Municipalities hit
2
municipalities
Started on
1 May
2024
Heat detections
74
in a single hotspot: 96 MW
Danger at start
41
Very high · FWI index
Average daily power
86MW
detected power per day, on average

Where it burned

HOTSPOTS BY DAY 1 May13 May
13 May 2024

How it evolved, day by day

1 May 2024 · 30 MW · 2 2 May 2024 · 106 MW · 5 3 May 2024 · 75 MW · 10 4 May 2024 · 43 MW · 8 5 May 2024 · 65 MW · 10 6 May 2024 · 130 MW · 10 7 May 2024 · 374 MW · 18 9 May 2024 · 28 MW · 9 12 May 2024 · 9 MW · 1 13 May 2024 · 5 MW · 1
1 May 3 May 5 May 7 May 12 May

Fire radiative power detected each day, in megawatts, and number of hotspots. The magenta bar marks the peak day.

The weather it burned in

41°high
52km/h · peak gust
30%lowest humidity

It had gone one day without rain (1 mm or more) when it started.

This area had burned before

No earlier perimeters overlap this fire since 2016, when the satellite record begins.

How big is it?

10 km
It burned the equivalent of 1% of the area of London (15 km² against 1,583 km²).

London boundary: geoBoundaries · Office for National Statistics (Open Government Licence v3.0).

This compares size, not location: both shapes are at the same scale, north up, centred on each other.

What happened to each town

  1. Hopelchén 42,140 inhabitants where it started
    1,517 ha reached on 1 May
    0.2 %
  2. José María Morelos 13,332 inhabitants
    11 ha
    0.0 %

Burnt area inside each municipality, from crossing the GWIS perimeter with administrative boundaries. The distance runs from the point marking the centre of each area to the nearest fire: staying a kilometre away does not mean it reached the houses.

People and buildings inside the perimeter

GHSL 2025
Built-up area< 0.1 ha
Residents< 20

Inside the perimeter there was no noticeable built-up land and almost nobody lived there (GHSL 2025, satellite-based estimate).

This is an estimate on 100 m cells, made from satellite imagery and census data: it does not mean that homes burned or that anyone was harmed. The perimeter also contains land that never burned. The GHSL 2025 epoch is a projection made from 2020 and earlier data.

Source: Global Human Settlement Layer (GHS-BUILT-S and GHS-POP R2023A), European Commission Joint Research Centre (JRC), © European Union, CC BY 4.0. Sum inside the perimeter computed by WorldFires. human-settlement.emergency.copernicus.eu

Official record

According to CONAFOR, this fire started on 3 May 2024 and burned 988 ha (the satellite measured 1,523 ha). The two figures differ a lot, so these may not be exactly the same fire: take them as nearby records.

CONAFOR (Comisión Nacional Forestal), estadística de incendios forestales en datos.gob.mx (CC BY 4.0). This is the agency’s consolidated statistic: it measures the area in its own way, which is why it can differ from the satellite.

The weather day by day

ECMWF ERA5 reanalysis at the fire location, the standard reference for past weather, and the Canadian Fire Weather Index (the same system Copernicus uses), computed by WorldFires from that data. Days after the fire run until the first rain.

Open-Meteo.com (CC BY 4.0) · Copernicus Climate Change Service (ERA5)

Day High Min. humidity Peak gust Rain Danger (FWI)
1 May 37.7 °C 37 % 39 km/h 0.0 mm Very high 41
2 May 38.5 °C 32 % 40 km/h 0.0 mm Very high 45
3 May 38.5 °C 31 % 41 km/h 0.0 mm Very high 49
4 May 38.4 °C 34 % 43 km/h 0.1 mm Very high 47
5 May 37.8 °C 37 % 45 km/h 0.0 mm Extreme 51
6 May 38.6 °C 37 % 44 km/h 0.0 mm Very high 48
7 May 39.8 °C 35 % 42 km/h 0.1 mm Very high 46
8 May 39.7 °C 38 % 48 km/h 0.1 mm Extreme 52
9 May 40.6 °C 30 % 44 km/h 0.0 mm Extreme 50
10 May 37.5 °C 43 % 43 km/h 0.3 mm Very high 43
11 May 39.6 °C 39 % 40 km/h 0.0 mm Very high 40
12 May 39.3 °C 38 % 43 km/h 0.0 mm Very high 45
13 May 39.6 °C 38 % 52 km/h 0.0 mm Extreme 55
14 May after 37.8 °C 43 % 47 km/h 0.1 mm Very high 47
15 May after 38.7 °C 38 % 42 km/h 0.0 mm Very high 39
16 May after 38.7 °C 42 % 43 km/h 0.2 mm Very high 44
17 May after 40.8 °C 35 % 48 km/h 0.1 mm Very high 48
18 May after 39.1 °C 42 % 45 km/h 0.0 mm Very high 46
19 May after 36.1 °C 43 % 36 km/h 0.1 mm High 28
20 May after 37.8 °C 37 % 35 km/h 0.0 mm High 35
21 May after 37.8 °C 36 % 34 km/h 0.2 mm Very high 38
22 May after 37.2 °C 39 % 34 km/h 0.0 mm Very high 39
23 May after 38.5 °C 36 % 40 km/h 0.0 mm Very high 45

Its twins: fires that started in the same weather

It started with an FWI of 41.0, a minimum humidity of 37% and 1 day without rain. Fires in the area that started in weather like this since 2016: 15.

FWI at the start 41.0
Minimum humidity 37 %
Days without rain 1
this fire chosen twins rest of the area
Almost identicalSimilar

Outlines of the closest twins

Hopelchén fire, April 2021
1,575 ha 7 days FWI 39.1 Min. humidity 38 % 24 km away, in 2021

First rain (1 mm or more) after it ended: 1.1 mm on 14 May.

What happened to them

14 days
median duration
1,879 ha
median area
100 %
went past 1,000 ha
1.8 mm
rain at the end (median; 10 of 15 had it)

It burned an area similar to its twins (1,523 ha against a median of 1,879 ha) and lasted 13 days, against 14 days.

In 5 of 15, not even 1 mm fell in the ten days after the end: they went out without rain. In the rest, the first rainy day brought a median of 1.8 mm.

This is a bank of analogues: it shows what usually happens, not what will happen. With fewer than 15 twins we give no figures. How we calculate it

How it ended

—first rain
—no rain in ten days
52km/h · max. gust

It was considered over on 13 May, and not even 1 mm fell in the following ten days: it went out without rain. Twins with rain when they ended: 10 of 15, with a median of 1.8 mm.

Weather on this page: Open-Meteo.com (CC BY 4.0) · Copernicus Climate Change Service (ERA5)

How a twin is chosen

  • Same area: fires that have already ended, less than 250 km from this one, since 2016.
  • Same start: we compare the FWI on the first day, the minimum humidity that day and the run of days without rain before it. The slider sets how much they may differ.
  • Only pages with final weather data (ERA5 reanalysis) calculated in the same way as this fire’s; agricultural and grass burns and pages with data under review are left out.
  • Fires burning at the same time as this one (a week before or after) are left out: they share the same spell of weather and do not count as a precedent.
  • They are sorted by similarity, and the outlines of the first five are drawn.

How we calculate it

Before and after, from space

Drag the line to compare the same ground before the fire and after it.

Before · 24 Apr 2024
After · 20 May 2024

If the day is cloudy, change the date: each satellite passes once a day. In false colour the burnt ground looks brown or red.

The smoke

CAMS · Copernicus

On 10 May 2024 the air beside the fire reached 43 µg/m³ of PM2.5. That day averaged 21: 1.4 times the WHO daily guideline (15).

PM2.5 peak43 µg/m³
Days over the guideline4 days
PM1062 µg/m³
Optical depth0.80
30 Apr3 May6 May9 May12 May
Good Fair Moderate Poor Very poor Extremely poor

Particles from the Copernicus CAMS model at the centre of the perimeter; these are not measurements in each town. The pale bar is the worst hour, the solid one the daily average.

Open-Meteo.com (CC BY 4.0) · Copernicus Atmosphere Monitoring Service (CAMS)

Detections table · 74Every satellite heat detection, one by one, with time, satellite, power and coordinates.
⬇ Download CSV Times in UTC. Each detection is a 375 m pixel: a large fire yields hundreds per pass.
Date and timeSatelliteFRP (MW)LatLon

Other fires nearby

All fires in Mexico

Frequently asked questions

How long did the Hopelchén fire last?
According to the heat detections seen by satellite inside the perimeter, it burned from 1 May 2024 to 13 May 2024 (13 days). The perimeter dates it from 2 May 2024 to 9 May 2024.
How much area did it burn?
The perimeter GWIS (Copernicus) rebuilt from heat detections is 1,523 hectares (15.2 km²). It is an estimate: official national figures may differ.
Which municipalities burned?
The fire entered 2 municipalities: Hopelchén (1,517 ha, 0.2 %); José María Morelos (11 ha, 0.0 %).
What was the weather like?
During the fire the temperature reached 40.6 °C, humidity dropped to 30 % and gusts hit 52 km/h. The fire danger index (FWI) reached 55, class Extreme.
Where does this data come from?
From the GWIS (Copernicus) burnt perimeter, NASA FIRMS VIIRS hotspots and the administrative boundaries of Mexico (geoBoundaries). It is not an official report.
How did the fires that started in similar weather in this area end?
Fires less than 250 km away that started since 2016 with a similar FWI, humidity and dry spell: 15. Their median duration was 14 days and their median area 1,879 ha; 100 % went past 1,000 ha. In 5 of 15, not even 1 mm fell in the ten days after the end: they went out without rain. In the rest, the first rainy day brought a median of 1.8 mm.

Where to verify it

A satellite detection is not an official report. Final figures and the fire’s status are published by each country’s emergency service.

Emergency number: 911 · Emergency number and official warnings

Satellite cross-check

History of this page · 2 Changes in area, dates, name, official record or merged pages, compared every night since 24 October 2026.
  1. Last day with fire: 9 May 2024 → 13 May 2024.
  2. Start date: 2 May 2024 → 1 May 2024.

RSS Changes to this page With cross-checks and a citable version

Does something look wrong on this page?

This page is built from satellite data and official records, and it sometimes gets things wrong: the wrong dates, the wrong town, two fires merged into one, or something that was not a wildfire at all. If you know this fire first-hand (you live nearby, saw it, fought it or reported on it), tell us what really happened and we will check it.

Report an error
What do you think is wrong?

We will only use your email to reply about this report. Privacy. This is not an emergency service: if there is a fire now, call 911.

How we know this
  • Perimeter: GWIS (Copernicus), rebuilt from heat detections rather than mapped on imagery.
  • Dates adjusted with the VIIRS detections inside the perimeter, which said 2 May 2024 to 9 May 2024. 74 Suomi-NPP VIIRS detections on those dates.
  • Compared with CONAFOR: 988 official ha against 1,523 ha of perimeter; similar, but with reservations.
  • Weather: Copernicus ERA5 reanalysis at the fire location, in cells of about 25 km.
  • Built-up area and population come from the JRC Global Human Settlement Layer (epoch 2025, 100 m cells), summed inside the perimeter: an estimate of what was there, not a damage count.

How we build fire pages: methodology

Where this data comes from

The perimeter comes from the Copernicus Global Wildfire Information System (GWIS), which rebuilds it from MODIS and VIIRS heat detections and publishes it under CC BY 4.0. It is not measured on imagery as in Europe, so it is an estimate. Heat detections come from the VIIRS sensors aboard Suomi-NPP and NOAA-20, distributed by NASA FIRMS at 375 m resolution. Municipal boundaries come from geoBoundaries ADM2 (Creative Commons Attribution 4.0 (CC BY 4.0)). The area per municipality is computed by WorldFires by crossing the perimeter with those boundaries, so it may differ from each country’s official figure.