Skip to content
worldfires
MX · Mexico · –

Hopelchén fire, 22 March 2020 Hopelchén

Out · last detection 25 Apr 2020, 19:30 UTC

The fire started on 22 March 2020 in Hopelchén, Mexico, and satellites saw it burning for 35 days. Copernicus’s global GWIS system rebuilt a burnt perimeter of 6,801 hectares from heat detections, spread across a single municipality.

It is the 6th largest in Campeche since 2016 (of 124 with a page). Number 14 in Mexico in 2020, of 241.

Burnt area
6,801ha
GWIS perimeter (Copernicus)
Duration
35days
22 Mar 2020 – 25 Apr 2020
Municipalities hit
1
municipalities
Started on
22 Mar
2020
Heat detections
577
in a single hotspot: 198 MW
Danger at start
31
High · FWI index
Average daily power
301MW
detected power per day, on average

Where it burned

HOTSPOTS BY DAY 22 Mar25 Apr
25 Apr 2020

How it evolved, day by day

22 Mar 2020 · 37 MW · 2 23 Mar 2020 · 32 MW · 7 25 Mar 2020 · 35 MW · 4 26 Mar 2020 · 246 MW · 11 27 Mar 2020 · 62 MW · 16 29 Mar 2020 · 59 MW · 6 30 Mar 2020 · 11 MW · 1 31 Mar 2020 · 43 MW · 6 1 Apr 2020 · 126 MW · 8 2 Apr 2020 · 290 MW · 9 3 Apr 2020 · 998 MW · 51 4 Apr 2020 · 1,944 MW · 61 5 Apr 2020 · 890 MW · 73 6 Apr 2020 · 491 MW · 62 7 Apr 2020 · 271 MW · 31 8 Apr 2020 · 149 MW · 18 9 Apr 2020 · 252 MW · 17 10 Apr 2020 · 727 MW · 38 11 Apr 2020 · 1,333 MW · 35 12 Apr 2020 · 79 MW · 15 13 Apr 2020 · 350 MW · 8 14 Apr 2020 · 97 MW · 9 15 Apr 2020 · 401 MW · 21 16 Apr 2020 · 147 MW · 15 17 Apr 2020 · 88 MW · 13 18 Apr 2020 · 507 MW · 24 19 Apr 2020 · 2 MW · 1 20 Apr 2020 · 22 MW · 3 21 Apr 2020 · 203 MW · 4 22 Apr 2020 · 26 MW · 3 23 Apr 2020 · 1 MW · 1 24 Apr 2020 · 11 MW · 3 25 Apr 2020 · 8 MW · 1
22 Mar 4 Apr 14 Apr 21 Apr

Fire radiative power detected each day, in megawatts, and number of hotspots. The magenta bar marks the peak day.

The weather it burned in

40°high
57km/h · peak gust
29%lowest humidity

It had gone 15 days without rain (1 mm or more) when it started.

This area had burned before

60% of the perimeter overlaps earlier fires recorded since 2016: 3,557 ha in 2017, 547 ha in 2019.

How big is it?

10 km
It burned the equivalent of 4.3% of the area of London (68 km² against 1,583 km²).

London boundary: geoBoundaries · Office for National Statistics (Open Government Licence v3.0).

This compares size, not location: both shapes are at the same scale, north up, centred on each other.

What happened to each town

  1. Hopelchén 42,140 inhabitants where it started
    6,827 ha reached on 22 Mar
    0.9 %

Burnt area inside each municipality, from crossing the GWIS perimeter with administrative boundaries. The distance runs from the point marking the centre of each area to the nearest fire: staying a kilometre away does not mean it reached the houses.

People and buildings inside the perimeter

GHSL 2020
Built-up area< 0.1 ha
Residents< 20

Inside the perimeter there was no noticeable built-up land and almost nobody lived there (GHSL 2020, satellite-based estimate).

This is an estimate on 100 m cells, made from satellite imagery and census data: it does not mean that homes burned or that anyone was harmed. The perimeter also contains land that never burned.

Source: Global Human Settlement Layer (GHS-BUILT-S and GHS-POP R2023A), European Commission Joint Research Centre (JRC), © European Union, CC BY 4.0. Sum inside the perimeter computed by WorldFires. human-settlement.emergency.copernicus.eu

The weather day by day

ECMWF ERA5 reanalysis at the fire location, the standard reference for past weather, and the Canadian Fire Weather Index (the same system Copernicus uses), computed by WorldFires from that data. Days after the fire run until the first rain.

Open-Meteo.com (CC BY 4.0) · Copernicus Climate Change Service (ERA5)

Day High Min. humidity Peak gust Rain Danger (FWI)
22 Mar 34.1 °C 30 % 42 km/h 0.0 mm High 31
23 Mar 35.4 °C 29 % 39 km/h 0.0 mm Very high 38
24 Mar 34.2 °C 41 % 46 km/h 0.0 mm Very high 42
25 Mar 35.9 °C 36 % 41 km/h 0.0 mm High 36
26 Mar 36.6 °C 32 % 40 km/h 0.0 mm High 37
27 Mar 36.4 °C 36 % 47 km/h 0.0 mm Very high 42
28 Mar 37.3 °C 33 % 53 km/h 0.0 mm Very high 46
29 Mar 36.2 °C 31 % 47 km/h 0.0 mm Very high 48
30 Mar 34.6 °C 41 % 49 km/h 0.0 mm Very high 48
31 Mar 36.0 °C 34 % 42 km/h 0.0 mm High 36
1 Apr 36.0 °C 37 % 24 km/h 0.0 mm High 29
2 Apr 36.7 °C 35 % 38 km/h 0.0 mm High 36
3 Apr 37.2 °C 38 % 40 km/h 0.0 mm Very high 43
4 Apr 36.8 °C 30 % 42 km/h 0.0 mm Very high 44
5 Apr 36.6 °C 33 % 41 km/h 0.0 mm Very high 39
6 Apr 36.1 °C 38 % 42 km/h 0.0 mm Very high 43
7 Apr 37.3 °C 36 % 44 km/h 0.0 mm Very high 45
8 Apr 37.7 °C 32 % 44 km/h 0.0 mm Very high 43
9 Apr 38.9 °C 31 % 37 km/h 0.0 mm Very high 41
10 Apr 39.3 °C 29 % 37 km/h 0.0 mm Very high 42
11 Apr 38.0 °C 29 % 42 km/h 0.0 mm Very high 46
12 Apr 39.6 °C 33 % 57 km/h 0.0 mm Extreme 52
13 Apr 39.9 °C 29 % 48 km/h 0.0 mm Very high 41
14 Apr 37.8 °C 34 % 43 km/h 0.0 mm Very high 46
15 Apr 37.4 °C 33 % 40 km/h 0.0 mm High 37
16 Apr 36.5 °C 36 % 38 km/h 0.0 mm Very high 45
17 Apr 37.2 °C 33 % 45 km/h 0.0 mm Very high 48
18 Apr 37.4 °C 35 % 45 km/h 0.0 mm Extreme 50
19 Apr 37.2 °C 37 % 47 km/h 0.0 mm Very high 50
20 Apr 38.3 °C 32 % 38 km/h 0.0 mm High 36
21 Apr 38.4 °C 31 % 45 km/h 0.0 mm Very high 39
22 Apr 36.5 °C 39 % 46 km/h 0.0 mm Extreme 52
23 Apr 38.8 °C 37 % 56 km/h 0.0 mm Extreme 53
24 Apr 40.1 °C 33 % 38 km/h 0.0 mm High 32
25 Apr 37.4 °C 37 % 33 km/h 0.0 mm High 38
26 Apr after 37.6 °C 27 % 37 km/h 0.0 mm Very high 41
27 Apr after 35.5 °C 41 % 39 km/h 0.0 mm Very high 44
28 Apr after 35.5 °C 42 % 45 km/h 0.2 mm Very high 48
29 Apr after 36.4 °C 38 % 41 km/h 0.0 mm Very high 44
30 Apr after 35.7 °C 34 % 41 km/h 0.1 mm High 36
1 May after 35.9 °C 32 % 31 km/h 0.0 mm High 34
2 May after 35.7 °C 42 % 35 km/h 0.0 mm Very high 40
3 May after 35.5 °C 42 % 37 km/h 0.3 mm Very high 43
4 May after 35.5 °C 43 % 36 km/h 0.2 mm Very high 41
5 May after 35.5 °C 46 % 41 km/h 0.1 mm Very high 43

Its twins: fires that started in the same weather

It started with an FWI of 31.2, a minimum humidity of 30% and 15 days without rain. Fires in the area that started in weather like this since 2016: 15.

FWI at the start 31.2
Minimum humidity 30 %
Days without rain 15
this fire chosen twins rest of the area
Almost identicalSimilar

Outlines of the closest twins

Campeche fire, April 2023
1,551 ha 11 days FWI 31.5 Min. humidity 31 % 86 km away, in 2023

First rain (1 mm or more) after it ended: none in the following ten days.

What happened to them

11 days
median duration
1,852 ha
median area
100 %
went past 1,000 ha
3.8 mm
rain at the end (median; 8 of 15 had it)

It was 3.7 times larger than the median of its twins and lasted 35 days, against 11 days.

Only 1 of its 15 twins burned more. The weather on the first day does not explain everything: the wind in the following days, the fuel and the firefighting also count. In 7 of 15, not even 1 mm fell in the ten days after the end: they went out without rain. In the rest, the first rainy day brought a median of 3.8 mm.

This is a bank of analogues: it shows what usually happens, not what will happen. With fewer than 15 twins we give no figures. How we calculate it

How it ended

—first rain
—no rain in ten days
57km/h · max. gust

It was considered over on 25 Apr, and not even 1 mm fell in the following ten days: it went out without rain. Twins with rain when they ended: 8 of 15, with a median of 3.8 mm.

Weather on this page: Open-Meteo.com (CC BY 4.0) · Copernicus Climate Change Service (ERA5)

How a twin is chosen

  • Same area: fires that have already ended, less than 250 km from this one, since 2016.
  • Same start: we compare the FWI on the first day, the minimum humidity that day and the run of days without rain before it. The slider sets how much they may differ.
  • Only pages with final weather data (ERA5 reanalysis) calculated in the same way as this fire’s; agricultural and grass burns and pages with data under review are left out.
  • Fires burning at the same time as this one (a week before or after) are left out: they share the same spell of weather and do not count as a precedent.
  • They are sorted by similarity, and the outlines of the first five are drawn.

How we calculate it

Before and after, from space

Drag the line to compare the same ground before the fire and after it.

Before · 15 Mar 2020
After · 2 May 2020

If the day is cloudy, change the date: each satellite passes once a day. In false colour the burnt ground looks brown or red.

Detections table · 577Every satellite heat detection, one by one, with time, satellite, power and coordinates.
⬇ Download CSV Times in UTC. Each detection is a 375 m pixel: a large fire yields hundreds per pass.
Date and timeSatelliteFRP (MW)LatLon

Other fires nearby

All fires in Mexico

Frequently asked questions

How long did the Hopelchén fire last?
According to the heat detections seen by satellite inside the perimeter, it burned from 22 March 2020 to 25 April 2020 (35 days). The perimeter dates it from 25 March 2020 to 19 April 2020.
How much area did it burn?
The perimeter GWIS (Copernicus) rebuilt from heat detections is 6,801 hectares (68.0 km²). It is an estimate: official national figures may differ.
Which municipalities burned?
The fire only entered Hopelchén (6,827 ha, 0.9 %).
What was the weather like?
During the fire the temperature reached 40.1 °C, humidity dropped to 29 % and gusts hit 57 km/h. The fire danger index (FWI) reached 53, class Extreme.
Where does this data come from?
From the GWIS (Copernicus) burnt perimeter, NASA FIRMS VIIRS hotspots and the administrative boundaries of Mexico (geoBoundaries). It is not an official report.
How did the fires that started in similar weather in this area end?
Fires less than 250 km away that started since 2016 with a similar FWI, humidity and dry spell: 15. Their median duration was 11 days and their median area 1,852 ha; 100 % went past 1,000 ha. Only 1 of its 15 twins burned more. The weather on the first day does not explain everything: the wind in the following days, the fuel and the firefighting also count. In 7 of 15, not even 1 mm fell in the ten days after the end: they went out without rain. In the rest, the first rainy day brought a median of 3.8 mm.

Where to verify it

A satellite detection is not an official report. Final figures and the fire’s status are published by each country’s emergency service.

Emergency number: 911 · Emergency number and official warnings

Satellite cross-check

History of this page Changes in area, dates, name, official record or merged pages, compared every night since 24 October 2026.

Does something look wrong on this page?

This page is built from satellite data and official records, and it sometimes gets things wrong: the wrong dates, the wrong town, two fires merged into one, or something that was not a wildfire at all. If you know this fire first-hand (you live nearby, saw it, fought it or reported on it), tell us what really happened and we will check it.

Report an error
What do you think is wrong?

We will only use your email to reply about this report. Privacy. This is not an emergency service: if there is a fire now, call 911.

How we know this
  • Perimeter: GWIS (Copernicus), rebuilt from heat detections rather than mapped on imagery.
  • Dates adjusted with the VIIRS detections inside the perimeter, which said 25 March 2020 to 19 April 2020. 577 Suomi-NPP VIIRS detections on those dates.
  • We have not matched this page with any official record.
  • Weather: Copernicus ERA5 reanalysis at the fire location, in cells of about 25 km.
  • Built-up area and population come from the JRC Global Human Settlement Layer (epoch 2020, 100 m cells), summed inside the perimeter: an estimate of what was there, not a damage count.

How we build fire pages: methodology

Where this data comes from

The perimeter comes from the Copernicus Global Wildfire Information System (GWIS), which rebuilds it from MODIS and VIIRS heat detections and publishes it under CC BY 4.0. It is not measured on imagery as in Europe, so it is an estimate. Heat detections come from the VIIRS sensors aboard Suomi-NPP and NOAA-20, distributed by NASA FIRMS at 375 m resolution. Municipal boundaries come from geoBoundaries ADM2 (Creative Commons Attribution 4.0 (CC BY 4.0)). The area per municipality is computed by WorldFires by crossing the perimeter with those boundaries, so it may differ from each country’s official figure.