Skip to content
worldfires
MX · Mexico · –

Hopelchén fire, 18 March 2020 Hopelchén

Out · last detection

The fire started on in Hopelchén, Mexico, and satellites saw it burning for 19 days. Copernicus’s global GWIS system rebuilt a burnt perimeter of 1,902 hectares from heat detections, spread across a single municipality.

It is number 66 by size of the 124 fires with a page that started in Campeche since 2016. Number 169 in Mexico in 2020, of 241.

Burnt area
1,902ha
GWIS perimeter (Copernicus)
Duration
19days
18 Mar 2020 – 5 Apr 2020
Municipalities hit
1
municipalities
Started on
18 Mar
2020
Heat detections
94
in a single hotspot: 229 MW
Danger at start
33
High · FWI index
Average daily power
161MW
detected power per day, on average

Where it burned

HOTSPOTS BY DAY 18 Mar5 Apr
6 Apr 2020

How it evolved, day by day

18 Mar 2020 · 18 MW · 2 19 Mar 2020 · 110 MW · 5 20 Mar 2020 · 5 MW · 1 21 Mar 2020 · 12 MW · 1 23 Mar 2020 · 1,725 MW · 32 24 Mar 2020 · 63 MW · 14 25 Mar 2020 · 118 MW · 7 26 Mar 2020 · 51 MW · 7 27 Mar 2020 · 1 MW · 1 28 Mar 2020 · 91 MW · 11 29 Mar 2020 · 18 MW · 3 30 Mar 2020 · 9 MW · 1 31 Mar 2020 · 25 MW · 3 2 Apr 2020 · 7 MW · 1 5 Apr 2020 · 314 MW · 3 6 Apr 2020 · 7 MW · 2
18 Mar 23 Mar 27 Mar 31 Mar

Fire radiative power detected each day, in megawatts, and number of hotspots. The magenta bar marks the peak day.

The weather it burned in

37°high
52km/h · peak gust
30%lowest humidity

It had gone 11 days without rain (1 mm or more) when it started.

This area had burned before

No earlier perimeters overlap this fire since 2016, when the satellite record begins.

How big is it?

10 km
It burned the equivalent of 1.2% of the area of London (19 km² against 1,583 km²).

London boundary: geoBoundaries · Office for National Statistics (Open Government Licence v3.0).

This compares size, not location: both shapes are at the same scale, north up, centred on each other.

What happened to each town

  1. Hopelchén 42,140 inhabitants where it started
    1,912 ha reached on 18 Mar
    0.2 %

Burnt area inside each municipality, from crossing the GWIS perimeter with administrative boundaries. The distance runs from the point marking the centre of each area to the nearest fire: staying a kilometre away does not mean it reached the houses.

People and buildings inside the perimeter

GHSL 2020
Built-up area< 0.1 ha
Residents< 20

Inside the perimeter there was no noticeable built-up land and almost nobody lived there (GHSL 2020, satellite-based estimate).

This is an estimate on 100 m cells, made from satellite imagery and census data: it does not mean that homes burned or that anyone was harmed. The perimeter also contains land that never burned.

Source: Global Human Settlement Layer (GHS-BUILT-S and GHS-POP R2023A), European Commission Joint Research Centre (JRC), © European Union, CC BY 4.0. Sum inside the perimeter computed by WorldFires. human-settlement.emergency.copernicus.eu

The weather day by day

ECMWF ERA5 reanalysis at the fire location, the standard reference for past weather, and the Canadian Fire Weather Index (the same system Copernicus uses), computed by WorldFires from that data. Days after the fire run until the first rain.

Open-Meteo.com (CC BY 4.0) · Copernicus Climate Change Service (ERA5)

Day High Min. humidity Peak gust Rain Danger (FWI)
18 Mar 33.3 °C 43 % 44 km/h 0.0 mm High 33
19 Mar 34.3 °C 42 % 47 km/h 0.0 mm High 36
20 Mar 34.3 °C 41 % 47 km/h 0.0 mm Very high 38
21 Mar 33.8 °C 35 % 38 km/h 0.0 mm High 33
22 Mar 33.8 °C 31 % 41 km/h 0.0 mm High 33
23 Mar 35.2 °C 31 % 39 km/h 0.0 mm Very high 38
24 Mar 34.7 °C 39 % 45 km/h 0.0 mm Very high 42
25 Mar 35.8 °C 35 % 40 km/h 0.0 mm High 37
26 Mar 36.4 °C 32 % 39 km/h 0.0 mm High 36
27 Mar 36.4 °C 35 % 48 km/h 0.0 mm Very high 43
28 Mar 37.4 °C 32 % 52 km/h 0.0 mm Very high 47
29 Mar 36.1 °C 30 % 47 km/h 0.0 mm Very high 48
30 Mar 34.8 °C 41 % 49 km/h 0.0 mm Very high 48
31 Mar 35.9 °C 35 % 41 km/h 0.0 mm High 36
1 Apr 35.8 °C 37 % 24 km/h 0.0 mm High 29
2 Apr 36.7 °C 35 % 38 km/h 0.0 mm High 36
3 Apr 37.2 °C 38 % 40 km/h 0.0 mm Very high 42
4 Apr 36.6 °C 30 % 42 km/h 0.0 mm Very high 43
5 Apr 36.5 °C 33 % 41 km/h 0.0 mm Very high 40
6 Apr after 36.2 °C 39 % 43 km/h 0.0 mm Very high 42
7 Apr after 37.3 °C 36 % 44 km/h 0.0 mm Very high 44
8 Apr after 37.6 °C 33 % 44 km/h 0.0 mm Very high 42
9 Apr after 38.7 °C 32 % 36 km/h 0.0 mm Very high 40
10 Apr after 39.3 °C 28 % 38 km/h 0.0 mm Very high 42
11 Apr after 37.9 °C 29 % 41 km/h 0.0 mm Very high 46
12 Apr after 39.6 °C 32 % 57 km/h 0.0 mm Extreme 55
13 Apr after 39.6 °C 30 % 49 km/h 0.0 mm Very high 42
14 Apr after 37.9 °C 33 % 45 km/h 0.0 mm Very high 47
15 Apr after 37.3 °C 33 % 40 km/h 0.0 mm High 37

Its twins: fires that started in the same weather

It started with an FWI of 33.4, a minimum humidity of 43% and 11 days without rain. Fires in the area that started in weather like this since 2016: 27.

FWI at the start 33.4
Minimum humidity 43 %
Days without rain 11
this fire chosen twins rest of the area
Almost identicalSimilar

Outlines of the closest twins

Champotón fire, April 2023
1,790 ha 13 days FWI 35.1 Min. humidity 42 % 132 km away, in 2023

First rain (1 mm or more) after it ended: 1.2 mm on 12 May.

What happened to them

13 days
median duration
1,772 ha
median area
100 %
went past 1,000 ha
2.8 mm
rain at the end (median; 18 of 27 had it)

It burned an area similar to its twins (1,902 ha against a median of 1,772 ha) and lasted 19 days, against 13 days.

In 9 of 27, not even 1 mm fell in the ten days after the end: they went out without rain. In the rest, the first rainy day brought a median of 2.8 mm.

This is a bank of analogues: it shows what usually happens, not what will happen. With fewer than 15 twins we give no figures. How we calculate it

How it ended

—first rain
—no rain in ten days
52km/h · max. gust

It was considered over on 5 Apr, and not even 1 mm fell in the following ten days: it went out without rain. Twins with rain when they ended: 18 of 27, with a median of 2.8 mm.

Weather on this page: Open-Meteo.com (CC BY 4.0) · Copernicus Climate Change Service (ERA5)

How a twin is chosen

  • Same area: fires that have already ended, less than 250 km from this one, since 2016.
  • Same start: we compare the FWI on the first day, the minimum humidity that day and the run of days without rain before it. The slider sets how much they may differ.
  • Only pages with final weather data (ERA5 reanalysis) calculated in the same way as this fire’s; agricultural and grass burns and pages with data under review are left out.
  • Fires burning at the same time as this one (a week before or after) are left out: they share the same spell of weather and do not count as a precedent.
  • They are sorted by similarity, and the outlines of the first five are drawn.

How we calculate it

Before and after, from space

Drag the line to compare the same ground before the fire and after it.

Before · 11 Mar 2020
After · 12 Apr 2020

If the day is cloudy, change the date: each satellite passes once a day. In false colour the burnt ground looks brown or red.

Detections table · 94Every satellite heat detection, one by one, with time, satellite, power and coordinates.
⬇ Download CSV Times in UTC. Each detection is a 375 m pixel: a large fire yields hundreds per pass.
Date and timeSatelliteFRP (MW)LatLon

Other fires nearby

All fires in Mexico

Frequently asked questions

How long did the Hopelchén fire last?
According to the heat detections seen by satellite inside the perimeter, it burned from 18 March 2020 to 5 April 2020 (19 days). The perimeter dates it from 23 March 2020 to 29 March 2020.
How much area did it burn?
The perimeter GWIS (Copernicus) rebuilt from heat detections is 1,902 hectares (19.0 km²). It is an estimate: official national figures may differ.
Which municipalities burned?
The fire only entered Hopelchén (1,912 ha, 0.2 %).
What was the weather like?
During the fire the temperature reached 37.4 °C, humidity dropped to 30 % and gusts hit 52 km/h. The fire danger index (FWI) reached 48, class Very high.
Where does this data come from?
From the GWIS (Copernicus) burnt perimeter, NASA FIRMS VIIRS hotspots and the administrative boundaries of Mexico (geoBoundaries). It is not an official report.
How did the fires that started in similar weather in this area end?
Fires less than 250 km away that started since 2016 with a similar FWI, humidity and dry spell: 27. Their median duration was 13 days and their median area 1,772 ha; 100 % went past 1,000 ha. In 9 of 27, not even 1 mm fell in the ten days after the end: they went out without rain. In the rest, the first rainy day brought a median of 2.8 mm.

Where to verify it

A satellite detection is not an official report. Final figures and the fire’s status are published by each country’s emergency service.

Emergency number: 911 · Emergency number and official warnings

Satellite cross-check

History of this page · 2 Changes in area, dates, name, official record or merged pages, compared every night since 24 October 2026.
  1. Last day with fire: 29 March 2020 → 5 April 2020.
  2. Start date: 23 March 2020 → 18 March 2020.

RSS Changes to this page With cross-checks and a citable version

Does something look wrong on this page?

This page is built from satellite data and official records, and it sometimes gets things wrong: the wrong dates, the wrong town, two fires merged into one, or something that was not a wildfire at all. If you know this fire first-hand (you live nearby, saw it, fought it or reported on it), tell us what really happened and we will check it.

Report an error
What do you think is wrong?

We will only use your email to reply about this report. Privacy. This is not an emergency service: if there is a fire now, call 911.

How we know this
  • Perimeter: GWIS (Copernicus), rebuilt from heat detections rather than mapped on imagery.
  • Dates adjusted with the VIIRS detections inside the perimeter, which said 23 March 2020 to 29 March 2020. 94 Suomi-NPP VIIRS detections on those dates.
  • We have not matched this page with any official record.
  • Weather: Copernicus ERA5 reanalysis at the fire location, in cells of about 25 km.
  • Built-up area and population come from the JRC Global Human Settlement Layer (epoch 2020, 100 m cells), summed inside the perimeter: an estimate of what was there, not a damage count.

How we build fire pages: methodology

Where this data comes from

The perimeter comes from the Copernicus Global Wildfire Information System (GWIS), which rebuilds it from MODIS and VIIRS heat detections and publishes it under CC BY 4.0. It is not measured on imagery as in Europe, so it is an estimate. Heat detections come from the VIIRS sensors aboard Suomi-NPP and NOAA-20, distributed by NASA FIRMS at 375 m resolution. Municipal boundaries come from geoBoundaries ADM2 (Creative Commons Attribution 4.0 (CC BY 4.0)). The area per municipality is computed by WorldFires by crossing the perimeter with those boundaries, so it may differ from each country’s official figure.