Skip to content
worldfires
AU · Australia · –

Halls Creek fire, 9 September 2017 Halls Creek

Out · last detection

The fire started on in Halls Creek, Australia, and satellites saw it burning for 19 days. Copernicus’s global GWIS system rebuilt a burnt perimeter of 27,768 hectares from heat detections, spread across a single municipality.

This entry is probably a savanna fire in Australia’s tropical north, not a bushfire like those in the south of the country. Millions of hectares of northern savanna and grassland burn every year: much of it in burns lit on purpose early in the dry season (traditional fire management, parks and cattle stations), the rest in grass fires that return to the same ground every few years. This is our assumption, based on the location; it is not confirmed. That is why it is left out of the wildfire rankings.

Burnt area
27,768ha
GWIS perimeter (Copernicus)
Duration
19days
9 Sept 2017 – 27 Sept 2017
Municipalities hit
1
local government areas
Started on
9 Sept
2017
Heat detections
1,039
in a single hotspot: 368 MW
Danger at start
103
Very extreme · FWI index
Average daily power
892MW
detected power per day, on average

Where it burned

HOTSPOTS BY DAY 9 Sept27 Sept
27 Sept 2017

How it evolved, day by day

9 Sept 2017 · 45 MW · 19 10 Sept 2017 · 358 MW · 35 11 Sept 2017 · 294 MW · 26 12 Sept 2017 · 105 MW · 22 13 Sept 2017 · 5,226 MW · 162 14 Sept 2017 · 562 MW · 108 15 Sept 2017 · 1,160 MW · 111 16 Sept 2017 · 2,702 MW · 91 17 Sept 2017 · 847 MW · 95 18 Sept 2017 · 927 MW · 71 19 Sept 2017 · 264 MW · 39 20 Sept 2017 · 147 MW · 19 21 Sept 2017 · 1,760 MW · 97 22 Sept 2017 · 1,179 MW · 61 23 Sept 2017 · 640 MW · 33 24 Sept 2017 · 415 MW · 35 25 Sept 2017 · 38 MW · 6 26 Sept 2017 · 265 MW · 8 27 Sept 2017 · 8 MW · 1
9 Sept 13 Sept 17 Sept 21 Sept 25 Sept

Fire radiative power detected each day, in megawatts, and number of hotspots. The magenta bar marks the peak day.

The weather it burned in

39°high
72km/h · peak gust
2%lowest humidity

It had gone more than two months without rain (1 mm or more) when it started. Rain came after the fire: 2.0 mm on 7 Oct.

This area had burned before

No earlier perimeters overlap this fire since 2016, when the satellite record begins.

How big is it?

10 km
It burned the equivalent of 18% of the area of London (278 km² against 1,583 km²).

London boundary: geoBoundaries · Office for National Statistics (Open Government Licence v3.0).

This compares size, not location: both shapes are at the same scale, north up, centred on each other.

What happened to each town

  1. Halls Creek where it started
    28,065 ha
    0.2 %

Burnt area inside each municipality, from crossing the GWIS perimeter with administrative boundaries. The distance runs from the point marking the centre of each area to the nearest fire: staying a kilometre away does not mean it reached the houses.

People and buildings inside the perimeter

GHSL 2015
Built-up area< 0.1 ha
Residents< 20

Inside the perimeter there was no noticeable built-up land and almost nobody lived there (GHSL 2015, satellite-based estimate).

This is an estimate on 100 m cells, made from satellite imagery and census data: it does not mean that homes burned or that anyone was harmed. The perimeter also contains land that never burned.

Source: Global Human Settlement Layer (GHS-BUILT-S and GHS-POP R2023A), European Commission Joint Research Centre (JRC), © European Union, CC BY 4.0. Sum inside the perimeter computed by WorldFires. human-settlement.emergency.copernicus.eu

The weather day by day

ECMWF ERA5 reanalysis at the fire location, the standard reference for past weather, and the Canadian Fire Weather Index (the same system Copernicus uses), computed by WorldFires from that data. Days after the fire run until the first rain.

Open-Meteo.com (CC BY 4.0) · Copernicus Climate Change Service (ERA5)

Started with Extreme FWI: 43 % of the area in Australia Strong wind: 39 % of the area in Australia Very dry air: 28 % of the area in Australia 60 days without rain: 8.2 % of the area in Australia

Day High Min. humidity Peak gust Rain Danger (FWI)
9 Sept 32.9 °C 6 % 53 km/h 0.0 mm Very extreme 103
10 Sept 34.5 °C 6 % 44 km/h 0.0 mm Very extreme 94
11 Sept 35.4 °C 6 % 41 km/h 0.0 mm Very extreme 83
12 Sept 37.0 °C 7 % 23 km/h 0.0 mm Extreme 67
13 Sept 38.4 °C 6 % 28 km/h 0.0 mm Extreme 65
14 Sept 34.0 °C 11 % 72 km/h 0.0 mm Very extreme 139
15 Sept 34.1 °C 8 % 50 km/h 0.0 mm Very extreme 95
16 Sept 34.5 °C 2 % 41 km/h 0.0 mm Very extreme 92
17 Sept 34.4 °C 4 % 47 km/h 0.0 mm Very extreme 101
18 Sept 35.2 °C 4 % 35 km/h 0.0 mm Very extreme 86
19 Sept 36.7 °C 3 % 38 km/h 0.0 mm Very extreme 102
20 Sept 36.5 °C 7 % 49 km/h 0.0 mm Very extreme 94
21 Sept 37.9 °C 5 % 37 km/h 0.0 mm Very extreme 75
22 Sept 37.8 °C 12 % 31 km/h 0.0 mm Very extreme 83
23 Sept 37.9 °C 12 % 25 km/h 0.0 mm Extreme 68
24 Sept 37.8 °C 12 % 28 km/h 0.0 mm Extreme 68
25 Sept 37.5 °C 11 % 35 km/h 0.0 mm Very extreme 76
26 Sept 38.7 °C 12 % 30 km/h 0.0 mm Extreme 61
27 Sept 38.6 °C 17 % 35 km/h 0.0 mm Extreme 55
28 Sept after 38.4 °C 18 % 32 km/h 0.0 mm Extreme 54
29 Sept after 39.6 °C 19 % 39 km/h 0.0 mm Very extreme 71
30 Sept after 39.0 °C 18 % 41 km/h 0.0 mm Very extreme 71
1 Oct after 37.7 °C 17 % 42 km/h 0.0 mm Very extreme 72
2 Oct after 35.3 °C 24 % 53 km/h 0.0 mm Very extreme 74
3 Oct after 38.1 °C 18 % 48 km/h 0.0 mm Very extreme 73
4 Oct after 37.8 °C 12 % 35 km/h 0.0 mm Extreme 70
5 Oct after 39.8 °C 10 % 30 km/h 0.0 mm Very extreme 79
6 Oct after 39.5 °C 15 % 40 km/h 0.0 mm Extreme 66
7 Oct after 35.2 °C 32 % 33 km/h 2.0 mm Extreme 54

Before and after, from space

Drag the line to compare the same ground before the fire and after it.

Before · 2 Sept 2017
After · 4 Oct 2017

If the day is cloudy, change the date: each satellite passes once a day. In false colour the burnt ground looks brown or red.

Detections table · 1,039Every satellite heat detection, one by one, with time, satellite, power and coordinates.
⬇ Download CSV Times in UTC. Each detection is a 375 m pixel: a large fire yields hundreds per pass.
Date and timeSatelliteFRP (MW)LatLon

Other fires nearby

All fires in Australia

Frequently asked questions

How long did the Halls Creek fire last?
According to the heat detections seen by satellite inside the perimeter, it burned from 9 September 2017 to 27 September 2017 (19 days). The perimeter dates it from 10 September 2017 to 26 September 2017.
How much area did it burn?
The perimeter GWIS (Copernicus) rebuilt from heat detections is 27,768 hectares (277.7 km²). It is an estimate: official national figures may differ.
Which municipalities burned?
The fire only entered Halls Creek (28,065 ha, 0.2 %).
What was the weather like?
During the fire the temperature reached 38.7 °C, humidity dropped to 2 % and gusts hit 72 km/h. The fire danger index (FWI) reached 139, class Very extreme.
Where does this data come from?
From the GWIS (Copernicus) burnt perimeter, NASA FIRMS VIIRS hotspots and the administrative boundaries of Australia (geoBoundaries). It is not an official report.

Where to verify it

A satellite detection is not an official report. Final figures and the fire’s status are published by each country’s emergency service.

Emergency number: 000 · Emergency number and official warnings

Satellite cross-check

History of this page · 2 Changes in area, dates, name, official record or merged pages, compared every night since 24 October 2026.
  1. Last day with fire: 26 September 2017 → 27 September 2017.
  2. Start date: 10 September 2017 → 9 September 2017.

RSS Changes to this page With cross-checks and a citable version

Does something look wrong on this page?

This page is built from satellite data and official records, and it sometimes gets things wrong: the wrong dates, the wrong town, two fires merged into one, or something that was not a wildfire at all. If you know this fire first-hand (you live nearby, saw it, fought it or reported on it), tell us what really happened and we will check it.

Report an error
What do you think is wrong?

We will only use your email to reply about this report. Privacy. This is not an emergency service: if there is a fire now, call 000.

How we know this
  • Perimeter: GWIS (Copernicus), rebuilt from heat detections rather than mapped on imagery; 2 polygons grouped in this page.
  • Dates adjusted with the VIIRS detections inside the perimeter, which said 10 September 2017 to 26 September 2017. 1,039 Suomi-NPP VIIRS detections on those dates.
  • We have not matched this page with any official record.
  • Weather: Copernicus ERA5 reanalysis at the fire location, in cells of about 25 km.
  • Built-up area and population come from the JRC Global Human Settlement Layer (epoch 2015, 100 m cells), summed inside the perimeter: an estimate of what was there, not a damage count.
  • Probably a vegetation burn: not counted in the totals.

How we build fire pages: methodology

Where this data comes from

The perimeter comes from the Copernicus Global Wildfire Information System (GWIS), which rebuilds it from MODIS and VIIRS heat detections and publishes it under CC BY 4.0. It is not measured on imagery as in Europe, so it is an estimate. Heat detections come from the VIIRS sensors aboard Suomi-NPP and NOAA-20, distributed by NASA FIRMS at 375 m resolution. Municipal boundaries come from geoBoundaries ADM2 (Creative Commons Attribution 4.0 International (CC BY 4.0)). The area per municipality is computed by WorldFires by crossing the perimeter with those boundaries, so it may differ from each country’s official figure.