Skip to content
worldfires
AU · Australia · –

Halls Creek fire, 9 September 2017 Halls Creek

Out · last detection 18 Sept 2017, 17:10 UTC

The fire started on 9 September 2017 in Halls Creek, Australia, and satellites saw it burning for 10 days. Copernicus’s global GWIS system rebuilt a burnt perimeter of 39,453 hectares from heat detections, spread across a single municipality.

This entry is probably a savanna fire in Australia’s tropical north, not a bushfire like those in the south of the country. Millions of hectares of northern savanna and grassland burn every year: much of it in burns lit on purpose early in the dry season (traditional fire management, parks and cattle stations), the rest in grass fires that return to the same ground every few years. This is our assumption, based on the location; it is not confirmed. That is why it is left out of the wildfire rankings.

Burnt area
39,453ha
GWIS perimeter (Copernicus)
Duration
10days
9 Sept 2017 – 18 Sept 2017
Municipalities hit
1
local government areas
Started on
9 Sept
2017
Heat detections
1,591
in a single hotspot: 368 MW
Danger at start
102
Very extreme · FWI index
Average daily power
3.0GW
detected power per day, on average

Where it burned

HOTSPOTS BY DAY 9 Sept18 Sept
18 Sept 2017

How it evolved, day by day

9 Sept 2017 · 683 MW · 45 10 Sept 2017 · 593 MW · 58 11 Sept 2017 · 679 MW · 91 12 Sept 2017 · 5,828 MW · 268 13 Sept 2017 · 12,004 MW · 408 14 Sept 2017 · 5,857 MW · 412 15 Sept 2017 · 2,997 MW · 232 16 Sept 2017 · 965 MW · 59 17 Sept 2017 · 79 MW · 14 18 Sept 2017 · 15 MW · 4
9 Sept 11 Sept 13 Sept 15 Sept 17 Sept

Fire radiative power detected each day, in megawatts, and number of hotspots. The magenta bar marks the peak day.

The weather it burned in

37°high
72km/h · peak gust
2%lowest humidity

It had gone more than two months without rain (1 mm or more) when it started.

This area had burned before

No earlier perimeters overlap this fire since 2016, when the satellite record begins.

How big is it?

10 km
It burned the equivalent of 25% of the area of London (395 km² against 1,583 km²).

London boundary: geoBoundaries · Office for National Statistics (Open Government Licence v3.0).

This compares size, not location: both shapes are at the same scale, north up, centred on each other.

What happened to each town

  1. Halls Creek where it started
    39,404 ha
    0.3 %

Burnt area inside each municipality, from crossing the GWIS perimeter with administrative boundaries. The distance runs from the point marking the centre of each area to the nearest fire: staying a kilometre away does not mean it reached the houses.

People and buildings inside the perimeter

GHSL 2015
Built-up area< 0.1 ha
Residents< 20

Inside the perimeter there was no noticeable built-up land and almost nobody lived there (GHSL 2015, satellite-based estimate).

This is an estimate on 100 m cells, made from satellite imagery and census data: it does not mean that homes burned or that anyone was harmed. The perimeter also contains land that never burned.

Source: Global Human Settlement Layer (GHS-BUILT-S and GHS-POP R2023A), European Commission Joint Research Centre (JRC), © European Union, CC BY 4.0. Sum inside the perimeter computed by WorldFires. human-settlement.emergency.copernicus.eu

The weather day by day

ECMWF ERA5 reanalysis at the fire location, the standard reference for past weather, and the Canadian Fire Weather Index (the same system Copernicus uses), computed by WorldFires from that data. Days after the fire run until the first rain.

Open-Meteo.com (CC BY 4.0) · Copernicus Climate Change Service (ERA5)

Started with Extreme FWI: 43 % of the area in Australia Strong wind: 39 % of the area in Australia Very dry air: 28 % of the area in Australia 60 days without rain: 8.2 % of the area in Australia

Day High Min. humidity Peak gust Rain Danger (FWI)
9 Sept 31.9 °C 6 % 53 km/h 0.0 mm Very extreme 102
10 Sept 33.4 °C 6 % 44 km/h 0.0 mm Very extreme 93
11 Sept 34.3 °C 6 % 41 km/h 0.0 mm Very extreme 82
12 Sept 36.0 °C 7 % 23 km/h 0.0 mm Extreme 66
13 Sept 37.4 °C 6 % 28 km/h 0.0 mm Extreme 64
14 Sept 32.9 °C 11 % 72 km/h 0.0 mm Very extreme 138
15 Sept 33.1 °C 7 % 50 km/h 0.0 mm Very extreme 94
16 Sept 33.5 °C 2 % 41 km/h 0.0 mm Very extreme 91
17 Sept 33.4 °C 4 % 47 km/h 0.0 mm Very extreme 100
18 Sept 34.1 °C 4 % 35 km/h 0.0 mm Very extreme 86
19 Sept after 35.6 °C 3 % 38 km/h 0.0 mm Very extreme 102
20 Sept after 35.5 °C 7 % 49 km/h 0.0 mm Very extreme 94
21 Sept after 36.8 °C 5 % 37 km/h 0.0 mm Very extreme 74
22 Sept after 36.8 °C 12 % 31 km/h 0.0 mm Very extreme 82
23 Sept after 36.8 °C 12 % 25 km/h 0.0 mm Extreme 67
24 Sept after 36.7 °C 12 % 28 km/h 0.0 mm Extreme 68
25 Sept after 36.4 °C 11 % 35 km/h 0.0 mm Very extreme 75
26 Sept after 37.6 °C 12 % 30 km/h 0.0 mm Extreme 60
27 Sept after 37.5 °C 16 % 35 km/h 0.0 mm Extreme 54
28 Sept after 37.3 °C 18 % 32 km/h 0.0 mm Extreme 53

Before and after, from space

Drag the line to compare the same ground before the fire and after it.

Before · 2 Sept 2017
After · 25 Sept 2017

If the day is cloudy, change the date: each satellite passes once a day. In false colour the burnt ground looks brown or red.

Detections table · 1,591Every satellite heat detection, one by one, with time, satellite, power and coordinates.
⬇ Download CSV Times in UTC. Each detection is a 375 m pixel: a large fire yields hundreds per pass.
Date and timeSatelliteFRP (MW)LatLon

Other fires nearby

All fires in Australia

Frequently asked questions

How long did the Halls Creek fire last?
GWIS (Copernicus) dates it between 9 September 2017 and 18 September 2017: 10 days between the first and last heat detection of the perimeter.
How much area did it burn?
The perimeter GWIS (Copernicus) rebuilt from heat detections is 39,453 hectares (394.5 km²). It is an estimate: official national figures may differ.
Which municipalities burned?
The fire only entered Halls Creek (39,404 ha, 0.3 %).
What was the weather like?
During the fire the temperature reached 37.4 °C, humidity dropped to 2 % and gusts hit 72 km/h. The fire danger index (FWI) reached 138, class Very extreme.
Where does this data come from?
From the GWIS (Copernicus) burnt perimeter, NASA FIRMS VIIRS hotspots and the administrative boundaries of Australia (geoBoundaries). It is not an official report.

Where to verify it

A satellite detection is not an official report. Final figures and the fire’s status are published by each country’s emergency service.

Emergency number: 000 · Emergency number and official warnings

Satellite cross-check

History of this page Changes in area, dates, name, official record or merged pages, compared every night since 24 October 2026.

Does something look wrong on this page?

This page is built from satellite data and official records, and it sometimes gets things wrong: the wrong dates, the wrong town, two fires merged into one, or something that was not a wildfire at all. If you know this fire first-hand (you live nearby, saw it, fought it or reported on it), tell us what really happened and we will check it.

Report an error
What do you think is wrong?

We will only use your email to reply about this report. Privacy. This is not an emergency service: if there is a fire now, call 000.

How we know this
  • Perimeter: GWIS (Copernicus), rebuilt from heat detections rather than mapped on imagery; 2 polygons grouped in this page.
  • Dates from the perimeter: the VIIRS detections inside it did not change them. 1,591 Suomi-NPP VIIRS detections on those dates.
  • We have not matched this page with any official record.
  • Weather: Copernicus ERA5 reanalysis at the fire location, in cells of about 25 km.
  • Built-up area and population come from the JRC Global Human Settlement Layer (epoch 2015, 100 m cells), summed inside the perimeter: an estimate of what was there, not a damage count.
  • Probably a vegetation burn: not counted in the totals.

How we build fire pages: methodology

Where this data comes from

The perimeter comes from the Copernicus Global Wildfire Information System (GWIS), which rebuilds it from MODIS and VIIRS heat detections and publishes it under CC BY 4.0. It is not measured on imagery as in Europe, so it is an estimate. Heat detections come from the VIIRS sensors aboard Suomi-NPP and NOAA-20, distributed by NASA FIRMS at 375 m resolution. Municipal boundaries come from geoBoundaries ADM2 (Creative Commons Attribution 4.0 International (CC BY 4.0)). The area per municipality is computed by WorldFires by crossing the perimeter with those boundaries, so it may differ from each country’s official figure.