Skip to content
worldfires
BR · Brazil · –

Formoso do Araguaia fire, 15 August 2016 Formoso do Araguaia, Sandolândia

Out · last detection

The fire started on in Formoso do Araguaia, Brazil, and satellites saw it burning for 11 days. Copernicus’s global GWIS system rebuilt a burnt perimeter of 3,603 hectares from heat detections, spread across 2 municipalities.

It is number 791 by size of the 1036 fires with a page that started in Tocantins since 2016. Number 478 in Brazil in 2016, of 648.

Burnt area
3,603ha
GWIS perimeter (Copernicus)
Duration
11days
15 Aug 2016 – 25 Aug 2016
Municipalities hit
2
municipalities
Started on
15 Aug
2016
Heat detections
140
in a single hotspot: 230 MW
Danger at start
45
Very high · FWI index
Average daily power
199MW
detected power per day, on average

Where it burned

HOTSPOTS BY DAY 15 Aug25 Aug
25 Aug 2016

How it evolved, day by day

16 Aug 2016 · 22 MW · 3 17 Aug 2016 · 37 MW · 7 18 Aug 2016 · 1,020 MW · 26 19 Aug 2016 · 182 MW · 25 20 Aug 2016 · 450 MW · 32 21 Aug 2016 · 10 MW · 5 22 Aug 2016 · 29 MW · 6 23 Aug 2016 · 159 MW · 23 24 Aug 2016 · 50 MW · 9 25 Aug 2016 · 34 MW · 4
16 Aug 18 Aug 20 Aug 22 Aug 24 Aug

Fire radiative power detected each day, in megawatts, and number of hotspots. The magenta bar marks the peak day.

The weather it burned in

39°high
51km/h · peak gust
23%lowest humidity

It had gone more than two months without rain (1 mm or more) when it started.

This area had burned before

No earlier perimeters overlap this fire since 2016, when the satellite record begins.

How big is it?

10 km
It burned the equivalent of 2.3% of the area of London (36 km² against 1,583 km²).

London boundary: geoBoundaries · Office for National Statistics (Open Government Licence v3.0).

This compares size, not location: both shapes are at the same scale, north up, centred on each other.

What happened to each town

  1. Formoso do Araguaia where it started
    3,590 ha reached on 16 Aug
    0.3 %
  2. Sandolândia 3,723 inhabitants
    34 ha reached on 23 Aug
    0.0 %

Burnt area inside each municipality, from crossing the GWIS perimeter with administrative boundaries. The distance runs from the point marking the centre of each area to the nearest fire: staying a kilometre away does not mean it reached the houses.

People and buildings inside the perimeter

GHSL 2015
Built-up area< 0.1 ha
Residents< 20

Inside the perimeter there was no noticeable built-up land and almost nobody lived there (GHSL 2015, satellite-based estimate).

This is an estimate on 100 m cells, made from satellite imagery and census data: it does not mean that homes burned or that anyone was harmed. The perimeter also contains land that never burned.

Source: Global Human Settlement Layer (GHS-BUILT-S and GHS-POP R2023A), European Commission Joint Research Centre (JRC), © European Union, CC BY 4.0. Sum inside the perimeter computed by WorldFires. human-settlement.emergency.copernicus.eu

The weather day by day

ECMWF ERA5 reanalysis at the fire location, the standard reference for past weather, and the Canadian Fire Weather Index (the same system Copernicus uses), computed by WorldFires from that data. Days after the fire run until the first rain.

Open-Meteo.com (CC BY 4.0) · Copernicus Climate Change Service (ERA5)

Started with 60 days without rain: 55 % of the area in Brazil

Day High Min. humidity Peak gust Rain Danger (FWI)
15 Aug 37.4 °C 34 % 24 km/h 0.0 mm Very high 45
16 Aug 37.4 °C 30 % 17 km/h 0.0 mm Very high 40
17 Aug 37.2 °C 29 % 18 km/h 0.0 mm High 37
18 Aug 38.5 °C 25 % 27 km/h 0.0 mm Extreme 53
19 Aug 38.7 °C 24 % 34 km/h 0.0 mm Extreme 62
20 Aug 37.4 °C 26 % 37 km/h 0.0 mm Extreme 63
21 Aug 37.5 °C 29 % 37 km/h 0.0 mm Very high 41
22 Aug 33.7 °C 32 % 35 km/h 0.0 mm Very high 43
23 Aug 36.4 °C 27 % 28 km/h 0.0 mm Very high 47
24 Aug 37.6 °C 23 % 51 km/h 0.0 mm Very extreme 73
25 Aug 36.4 °C 27 % 47 km/h 0.1 mm Extreme 69
26 Aug after 36.7 °C 24 % 41 km/h 0.0 mm Extreme 63
27 Aug after 36.9 °C 25 % 40 km/h 0.0 mm Extreme 62
28 Aug after 36.6 °C 29 % 46 km/h 0.0 mm Extreme 65
29 Aug after 36.8 °C 25 % 42 km/h 0.0 mm Extreme 61
30 Aug after 39.0 °C 18 % 33 km/h 0.0 mm Extreme 65
31 Aug after 38.4 °C 23 % 22 km/h 0.0 mm Very high 45
1 Sept after 38.2 °C 23 % 25 km/h 0.0 mm Extreme 59
2 Sept after 38.6 °C 22 % 43 km/h 0.0 mm Very extreme 73
3 Sept after 36.6 °C 25 % 45 km/h 0.0 mm Very extreme 71
4 Sept after 36.8 °C 21 % 46 km/h 0.0 mm Very extreme 71

Its twins: fires that started in the same weather

It started with an FWI of 44.7, a minimum humidity of 34% and more than two months without rain. Fires in the area that started in weather like this since 2016: 31.

FWI at the start 44.7
Minimum humidity 34 %
Days without rain 60+
this fire chosen twins rest of the area
Almost identicalSimilar

Outlines of the closest twins

São Félix do Araguaia fire, September 2025
5,698 ha 4 days FWI 45.2 Min. humidity 32 % 106 km away, in 2025

First rain (1 mm or more) after it ended: 4.0 mm on 23 Sept.

What happened to them

13 days
median duration
5,940 ha
median area
35 %
went past 10,000 ha
3.0 mm
rain at the end (median; 11 of 31 had it)

It stayed below its twins: 3,603 ha against a median of 5,940 ha. It lasted 11 days, against 13 days.

In 20 of 31, not even 1 mm fell in the ten days after the end: they went out without rain. In the rest, the first rainy day brought a median of 3.0 mm.

This is a bank of analogues: it shows what usually happens, not what will happen. With fewer than 15 twins we give no figures. How we calculate it

How it ended

—first rain
—no rain in ten days
51km/h · max. gust

It was considered over on 25 Aug, and not even 1 mm fell in the following ten days: it went out without rain. Twins with rain when they ended: 11 of 31, with a median of 3.0 mm.

Weather on this page: Open-Meteo.com (CC BY 4.0) · Copernicus Climate Change Service (ERA5)

How a twin is chosen

  • Same area: fires that have already ended, less than 250 km from this one, since 2016.
  • Same start: we compare the FWI on the first day, the minimum humidity that day and the run of days without rain before it. The slider sets how much they may differ.
  • Only pages with final weather data (ERA5 reanalysis) calculated in the same way as this fire’s; agricultural and grass burns and pages with data under review are left out.
  • Fires burning at the same time as this one (a week before or after) are left out: they share the same spell of weather and do not count as a precedent.
  • They are sorted by similarity, and the outlines of the first five are drawn.

How we calculate it

Before and after, from space

Drag the line to compare the same ground before the fire and after it.

Before · 8 Aug 2016
After · 1 Sept 2016

If the day is cloudy, change the date: each satellite passes once a day. In false colour the burnt ground looks brown or red.

Detections table · 140Every satellite heat detection, one by one, with time, satellite, power and coordinates.
⬇ Download CSV Times in UTC. Each detection is a 375 m pixel: a large fire yields hundreds per pass.
Date and timeSatelliteFRP (MW)LatLon

Other fires nearby

All fires in Brazil

Frequently asked questions

How long did the Formoso do Araguaia fire last?
According to the heat detections seen by satellite inside the perimeter, it burned from 15 August 2016 to 25 August 2016 (11 days). The perimeter dates it from 15 August 2016 to 24 August 2016.
How much area did it burn?
The perimeter GWIS (Copernicus) rebuilt from heat detections is 3,603 hectares (36.0 km²). It is an estimate: official national figures may differ.
Which municipalities burned?
The fire entered 2 municipalities: Formoso do Araguaia (3,590 ha, 0.3 %); Sandolândia (34 ha, 0.0 %).
What was the weather like?
During the fire the temperature reached 38.7 °C, humidity dropped to 23 % and gusts hit 51 km/h. The fire danger index (FWI) reached 73, class Very extreme.
Where does this data come from?
From the GWIS (Copernicus) burnt perimeter, NASA FIRMS VIIRS hotspots and the administrative boundaries of Brazil (geoBoundaries). It is not an official report.
How did the fires that started in similar weather in this area end?
Fires less than 250 km away that started since 2016 with a similar FWI, humidity and dry spell: 31. Their median duration was 13 days and their median area 5,940 ha; 35 % went past 10,000 ha. In 20 of 31, not even 1 mm fell in the ten days after the end: they went out without rain. In the rest, the first rainy day brought a median of 3.0 mm.

Where to verify it

A satellite detection is not an official report. Final figures and the fire’s status are published by each country’s emergency service.

Emergency number: 193 · Emergency number and official warnings

Satellite cross-check

History of this page · 1 Changes in area, dates, name, official record or merged pages, compared every night since 24 October 2026.
  1. Last day with fire: 24 August 2016 → 25 August 2016.

RSS Changes to this page With cross-checks and a citable version

Does something look wrong on this page?

This page is built from satellite data and official records, and it sometimes gets things wrong: the wrong dates, the wrong town, two fires merged into one, or something that was not a wildfire at all. If you know this fire first-hand (you live nearby, saw it, fought it or reported on it), tell us what really happened and we will check it.

Report an error
What do you think is wrong?

We will only use your email to reply about this report. Privacy. This is not an emergency service: if there is a fire now, call 193.

How we know this
  • Perimeter: GWIS (Copernicus), rebuilt from heat detections rather than mapped on imagery.
  • Dates adjusted with the VIIRS detections inside the perimeter, which said 15 August 2016 to 24 August 2016. 140 Suomi-NPP VIIRS detections on those dates.
  • We have not matched this page with any official record.
  • Weather: Copernicus ERA5 reanalysis at the fire location, in cells of about 25 km.
  • Built-up area and population come from the JRC Global Human Settlement Layer (epoch 2015, 100 m cells), summed inside the perimeter: an estimate of what was there, not a damage count.

How we build fire pages: methodology

Where this data comes from

The perimeter comes from the Copernicus Global Wildfire Information System (GWIS), which rebuilds it from MODIS and VIIRS heat detections and publishes it under CC BY 4.0. It is not measured on imagery as in Europe, so it is an estimate. Heat detections come from the VIIRS sensors aboard Suomi-NPP and NOAA-20, distributed by NASA FIRMS at 375 m resolution. Municipal boundaries come from geoBoundaries ADM2 (Creative Commons Attribution 3.0 Intergovernmental Organisations (CC BY 3.0 IGO)). The area per municipality is computed by WorldFires by crossing the perimeter with those boundaries, so it may differ from each country’s official figure.