Skip to content
worldfires
BR · Brazil · –

Formosa do Rio Preto fire, August 2024 Formosa do Rio Preto

Out · last detection 29 Aug 2024, 16:43 UTC

The fire started on 25 August 2024 in Formosa do Rio Preto, Brazil, and satellites saw it burning for 5 days. Copernicus’s global GWIS system rebuilt a burnt perimeter of 3,856 hectares from heat detections, spread across a single municipality.

It is the 289th largest in Bahia since 2016 (of 386 with a page). Number 952 in Brazil in 2024, of 1301.

Burnt area
3,856ha
GWIS perimeter (Copernicus)
Duration
5days
25 Aug 2024 – 29 Aug 2024
Municipalities hit
1
municipalities
Started on
25 Aug
2024
Heat detections
116
in a single hotspot: 146 MW
Danger at start
44
Very high · FWI index
Average daily power
655MW
detected power per day, on average

Where it burned

HOTSPOTS BY DAY 25 Aug29 Aug
29 Aug 2024

How it evolved, day by day

26 Aug 2024 · 461 MW · 7 27 Aug 2024 · 416 MW · 28 28 Aug 2024 · 1,719 MW · 77 29 Aug 2024 · 23 MW · 4
26 Aug 27 Aug 28 Aug 29 Aug

Fire radiative power detected each day, in megawatts, and number of hotspots. The magenta bar marks the peak day.

The weather it burned in

35°high
62km/h · peak gust
17%lowest humidity

It had gone more than two months without rain (1 mm or more) when it started.

This area had burned before

No earlier perimeters overlap this fire since 2016, when the satellite record begins.

How big is it?

10 km
It burned the equivalent of 2.4% of the area of London (39 km² against 1,583 km²).

London boundary: geoBoundaries · Office for National Statistics (Open Government Licence v3.0).

This compares size, not location: both shapes are at the same scale, north up, centred on each other.

What happened to each town

  1. Formosa do Rio Preto 25,899 inhabitants where it started
    3,877 ha reached on 26 Aug
    0.2 %

Burnt area inside each municipality, from crossing the GWIS perimeter with administrative boundaries. The distance runs from the point marking the centre of each area to the nearest fire: staying a kilometre away does not mean it reached the houses.

People and buildings inside the perimeter

GHSL 2025
Built-up area< 0.1 ha
Residents< 20

Inside the perimeter there was no noticeable built-up land and almost nobody lived there (GHSL 2025, satellite-based estimate).

This is an estimate on 100 m cells, made from satellite imagery and census data: it does not mean that homes burned or that anyone was harmed. The perimeter also contains land that never burned. The GHSL 2025 epoch is a projection made from 2020 and earlier data.

Source: Global Human Settlement Layer (GHS-BUILT-S and GHS-POP R2023A), European Commission Joint Research Centre (JRC), © European Union, CC BY 4.0. Sum inside the perimeter computed by WorldFires. human-settlement.emergency.copernicus.eu

The weather day by day

ECMWF ERA5 reanalysis at the fire location, the standard reference for past weather, and the Canadian Fire Weather Index (the same system Copernicus uses), computed by WorldFires from that data. Days after the fire run until the first rain.

Open-Meteo.com (CC BY 4.0) · Copernicus Climate Change Service (ERA5)

Started with 60 days without rain: 55 % of the area in Brazil

Day High Min. humidity Peak gust Rain Danger (FWI)
25 Aug 34.1 °C 22 % 35 km/h 0.0 mm Very high 44
26 Aug 35.0 °C 17 % 34 km/h 0.0 mm Very high 45
27 Aug 34.9 °C 20 % 39 km/h 0.0 mm Extreme 54
28 Aug 31.9 °C 19 % 51 km/h 0.0 mm Extreme 65
29 Aug 29.8 °C 34 % 62 km/h 0.0 mm Extreme 67
30 Aug after 31.0 °C 30 % 52 km/h 0.0 mm Extreme 51
31 Aug after 32.9 °C 27 % 47 km/h 0.0 mm Extreme 51
1 Sept after 33.1 °C 22 % 42 km/h 0.0 mm Very high 48
2 Sept after 32.9 °C 17 % 40 km/h 0.0 mm Extreme 51
3 Sept after 34.5 °C 18 % 31 km/h 0.0 mm Very high 47
4 Sept after 35.5 °C 10 % 41 km/h 0.0 mm Extreme 66
5 Sept after 33.8 °C 15 % 38 km/h 0.0 mm Extreme 63
6 Sept after 34.7 °C 18 % 36 km/h 0.0 mm Extreme 57
7 Sept after 34.3 °C 19 % 40 km/h 0.0 mm Extreme 59
8 Sept after 33.2 °C 20 % 44 km/h 0.0 mm Extreme 60

Its twins: fires that started in the same weather

It started with an FWI of 44.2, a minimum humidity of 22% and more than two months without rain. Fires in the area that started in weather like this since 2016: 46.

FWI at the start 44.2
Minimum humidity 22 %
Days without rain 60+
this fire chosen twins rest of the area
Almost identicalSimilar

Outlines of the closest twins

Formosa do Rio Preto fire, September 2024
4,146 ha 7 days FWI 44.2 Min. humidity 20 % 59 km away, in 2024

First rain (1 mm or more) after it ended: none in the following ten days.

What happened to them

8 days
median duration
5,776 ha
median area
20 %
went past 10,000 ha
3.7 mm
rain at the end (median; 21 of 46 had it)

It stayed below its twins: 3,856 ha against a median of 5,776 ha. It lasted 5 days, against 8 days.

In 25 of 46, not even 1 mm fell in the ten days after the end: they went out without rain. In the rest, the first rainy day brought a median of 3.7 mm.

This is a bank of analogues: it shows what usually happens, not what will happen. With fewer than 15 twins we give no figures. How we calculate it

How it ended

—first rain
—no rain in ten days
62km/h · max. gust

It was considered over on 29 Aug, and not even 1 mm fell in the following ten days: it went out without rain. Twins with rain when they ended: 21 of 46, with a median of 3.7 mm.

Weather on this page: Open-Meteo.com (CC BY 4.0) · Copernicus Climate Change Service (ERA5)

How a twin is chosen

  • Same area: fires that have already ended, less than 250 km from this one, since 2016.
  • Same start: we compare the FWI on the first day, the minimum humidity that day and the run of days without rain before it. The slider sets how much they may differ.
  • Only pages with final weather data (ERA5 reanalysis) calculated in the same way as this fire’s; agricultural and grass burns and pages with data under review are left out.
  • Fires burning at the same time as this one (a week before or after) are left out: they share the same spell of weather and do not count as a precedent.
  • They are sorted by similarity, and the outlines of the first five are drawn.

How we calculate it

Before and after, from space

Drag the line to compare the same ground before the fire and after it.

Before · 18 Aug 2024
After · 5 Sept 2024

If the day is cloudy, change the date: each satellite passes once a day. In false colour the burnt ground looks brown or red.

The smoke

CAMS · Copernicus

On 30 August 2024 the air beside the fire reached 11 µg/m³ of PM2.5, but no daily average passed the WHO guideline (15).

PM2.5 peak11 µg/m³
Days over the guideline0 days
PM1017 µg/m³
Optical depth0.24
25 Aug27 Aug29 Aug31 Aug
Good Fair Moderate Poor Very poor Extremely poor

Particles from the Copernicus CAMS model at the centre of the perimeter; these are not measurements in each town. The pale bar is the worst hour, the solid one the daily average.

Open-Meteo.com (CC BY 4.0) · Copernicus Atmosphere Monitoring Service (CAMS)

Detections table · 116Every satellite heat detection, one by one, with time, satellite, power and coordinates.
⬇ Download CSV Times in UTC. Each detection is a 375 m pixel: a large fire yields hundreds per pass.
Date and timeSatelliteFRP (MW)LatLon

Other fires nearby

All fires in Brazil

Frequently asked questions

How long did the Formosa do Rio Preto fire last?
According to the heat detections seen by satellite inside the perimeter, it burned from 25 August 2024 to 29 August 2024 (5 days). The perimeter dates it from 27 August 2024 to 29 August 2024.
How much area did it burn?
The perimeter GWIS (Copernicus) rebuilt from heat detections is 3,856 hectares (38.6 km²). It is an estimate: official national figures may differ.
Which municipalities burned?
The fire only entered Formosa do Rio Preto (3,877 ha, 0.2 %).
What was the weather like?
During the fire the temperature reached 35.0 °C, humidity dropped to 17 % and gusts hit 62 km/h. The fire danger index (FWI) reached 67, class Extreme.
Where does this data come from?
From the GWIS (Copernicus) burnt perimeter, NASA FIRMS VIIRS hotspots and the administrative boundaries of Brazil (geoBoundaries). It is not an official report.
How did the fires that started in similar weather in this area end?
Fires less than 250 km away that started since 2016 with a similar FWI, humidity and dry spell: 46. Their median duration was 8 days and their median area 5,776 ha; 20 % went past 10,000 ha. In 25 of 46, not even 1 mm fell in the ten days after the end: they went out without rain. In the rest, the first rainy day brought a median of 3.7 mm.

Where to verify it

A satellite detection is not an official report. Final figures and the fire’s status are published by each country’s emergency service.

Emergency number: 193 · Emergency number and official warnings

Satellite cross-check

History of this page · 1 Changes in area, dates, name, official record or merged pages, compared every night since 24 October 2026.
  1. Start date: 27 August 2024 → 25 August 2024.

RSS Changes to this page With cross-checks and a citable version

Does something look wrong on this page?

This page is built from satellite data and official records, and it sometimes gets things wrong: the wrong dates, the wrong town, two fires merged into one, or something that was not a wildfire at all. If you know this fire first-hand (you live nearby, saw it, fought it or reported on it), tell us what really happened and we will check it.

Report an error
What do you think is wrong?

We will only use your email to reply about this report. Privacy. This is not an emergency service: if there is a fire now, call 193.

How we know this
  • Perimeter: GWIS (Copernicus), rebuilt from heat detections rather than mapped on imagery.
  • Dates adjusted with the VIIRS detections inside the perimeter, which said 27 August 2024 to 29 August 2024. 116 Suomi-NPP VIIRS detections on those dates.
  • We have not matched this page with any official record.
  • Weather: Copernicus ERA5 reanalysis at the fire location, in cells of about 25 km.
  • Built-up area and population come from the JRC Global Human Settlement Layer (epoch 2025, 100 m cells), summed inside the perimeter: an estimate of what was there, not a damage count.

How we build fire pages: methodology

Where this data comes from

The perimeter comes from the Copernicus Global Wildfire Information System (GWIS), which rebuilds it from MODIS and VIIRS heat detections and publishes it under CC BY 4.0. It is not measured on imagery as in Europe, so it is an estimate. Heat detections come from the VIIRS sensors aboard Suomi-NPP and NOAA-20, distributed by NASA FIRMS at 375 m resolution. Municipal boundaries come from geoBoundaries ADM2 (Creative Commons Attribution 3.0 Intergovernmental Organisations (CC BY 3.0 IGO)). The area per municipality is computed by WorldFires by crossing the perimeter with those boundaries, so it may differ from each country’s official figure.