Skip to content
worldfires
BR · Brazil · –

Formosa do Rio Preto fire, 7 September 2019 Formosa do Rio Preto

Out · last detection 15 Sept 2019, 17:21 UTC

The fire started on 7 September 2019 in Formosa do Rio Preto, Brazil, and satellites saw it burning for 9 days. Copernicus’s global GWIS system rebuilt a burnt perimeter of 5,218 hectares from heat detections, spread across a single municipality.

It is the 190th largest in Bahia since 2016 (of 386 with a page). Number 440 in Brazil in 2019, of 973.

Burnt area
5,218ha
GWIS perimeter (Copernicus)
Duration
9days
7 Sept 2019 – 15 Sept 2019
Municipalities hit
1
municipalities
Started on
7 Sept
2019
Heat detections
171
in a single hotspot: 104 MW
Danger at start
72
Very extreme · FWI index
Average daily power
279MW
detected power per day, on average

Where it burned

HOTSPOTS BY DAY 7 Sept15 Sept
15 Sept 2019

How it evolved, day by day

7 Sept 2019 · 1,255 MW · 75 8 Sept 2019 · 163 MW · 17 9 Sept 2019 · 711 MW · 46 10 Sept 2019 · 98 MW · 12 11 Sept 2019 · 19 MW · 2 12 Sept 2019 · 55 MW · 5 13 Sept 2019 · 136 MW · 7 14 Sept 2019 · 68 MW · 6 15 Sept 2019 · 3 MW · 1
7 Sept 9 Sept 11 Sept 13 Sept 15 Sept

Fire radiative power detected each day, in megawatts, and number of hotspots. The magenta bar marks the peak day.

The weather it burned in

36°high
54km/h · peak gust
17%lowest humidity

It had gone more than two months without rain (1 mm or more) when it started.

This area had burned before

0% of the perimeter overlaps earlier fires recorded since 2016: 24 ha in 2016.

How big is it?

10 km
It burned the equivalent of 3.3% of the area of London (52 km² against 1,583 km²).

London boundary: geoBoundaries · Office for National Statistics (Open Government Licence v3.0).

This compares size, not location: both shapes are at the same scale, north up, centred on each other.

What happened to each town

  1. Formosa do Rio Preto 25,899 inhabitants where it started
    5,260 ha reached on 7 Sept
    0.3 %

Burnt area inside each municipality, from crossing the GWIS perimeter with administrative boundaries. The distance runs from the point marking the centre of each area to the nearest fire: staying a kilometre away does not mean it reached the houses.

People and buildings inside the perimeter

GHSL 2020
Built-up area< 0.1 ha
Residents< 20

Inside the perimeter there was no noticeable built-up land and almost nobody lived there (GHSL 2020, satellite-based estimate).

This is an estimate on 100 m cells, made from satellite imagery and census data: it does not mean that homes burned or that anyone was harmed. The perimeter also contains land that never burned.

Source: Global Human Settlement Layer (GHS-BUILT-S and GHS-POP R2023A), European Commission Joint Research Centre (JRC), © European Union, CC BY 4.0. Sum inside the perimeter computed by WorldFires. human-settlement.emergency.copernicus.eu

The weather day by day

ECMWF ERA5 reanalysis at the fire location, the standard reference for past weather, and the Canadian Fire Weather Index (the same system Copernicus uses), computed by WorldFires from that data. Days after the fire run until the first rain.

Open-Meteo.com (CC BY 4.0) · Copernicus Climate Change Service (ERA5)

Started with Extreme FWI: 46 % of the area in Brazil Strong wind: 3.1 % of the area in Brazil 60 days without rain: 55 % of the area in Brazil

Day High Min. humidity Peak gust Rain Danger (FWI)
7 Sept 32.6 °C 28 % 54 km/h 0.0 mm Very extreme 72
8 Sept 32.9 °C 27 % 51 km/h 0.0 mm Extreme 62
9 Sept 32.9 °C 29 % 49 km/h 0.0 mm Extreme 58
10 Sept 33.8 °C 27 % 44 km/h 0.0 mm Extreme 56
11 Sept 33.6 °C 25 % 43 km/h 0.0 mm Extreme 58
12 Sept 34.1 °C 21 % 43 km/h 0.0 mm Extreme 56
13 Sept 35.3 °C 22 % 42 km/h 0.0 mm Extreme 57
14 Sept 35.8 °C 17 % 42 km/h 0.0 mm Extreme 62
15 Sept 33.5 °C 22 % 42 km/h 0.0 mm Extreme 56
16 Sept after 33.8 °C 28 % 52 km/h 0.0 mm Extreme 62
17 Sept after 33.9 °C 24 % 48 km/h 0.0 mm Extreme 55
18 Sept after 35.4 °C 23 % 40 km/h 0.0 mm Very high 45
19 Sept after 35.2 °C 26 % 37 km/h 0.0 mm Very high 46
20 Sept after 35.6 °C 26 % 41 km/h 0.0 mm Very high 47
21 Sept after 36.0 °C 23 % 41 km/h 0.0 mm Extreme 51
22 Sept after 34.8 °C 25 % 31 km/h 0.0 mm Very high 42
23 Sept after 34.6 °C 23 % 47 km/h 0.0 mm Extreme 64
24 Sept after 34.3 °C 26 % 59 km/h 0.0 mm Extreme 70
25 Sept after 33.5 °C 28 % 49 km/h 0.0 mm Very high 46

Its twins: fires that started in the same weather

It started with an FWI of 71.6, a minimum humidity of 28% and more than two months without rain. Fires in the area that started in weather like this since 2016: 23.

FWI at the start 71.6
Minimum humidity 28 %
Days without rain 60+
this fire chosen twins rest of the area
Almost identicalSimilar

Outlines of the closest twins

Mateiros fire, August 2021
3,649 ha 1 day FWI 69.4 Min. humidity 28 % 117 km away, in 2021

First rain (1 mm or more) after it ended: none in the following ten days.

What happened to them

10 days
median duration
4,787 ha
median area
9 %
went past 10,000 ha
2.3 mm
rain at the end (median; 4 of 23 had it)

It burned an area similar to its twins (5,218 ha against a median of 4,787 ha) and lasted 9 days, against 10 days.

In 19 of 23, not even 1 mm fell in the ten days after the end: they went out without rain. In the rest, the first rainy day brought a median of 2.3 mm.

This is a bank of analogues: it shows what usually happens, not what will happen. With fewer than 15 twins we give no figures. How we calculate it

How it ended

—first rain
—no rain in ten days
54km/h · max. gust

It was considered over on 15 Sept, and not even 1 mm fell in the following ten days: it went out without rain. Twins with rain when they ended: 4 of 23, with a median of 2.3 mm.

Weather on this page: Open-Meteo.com (CC BY 4.0) · Copernicus Climate Change Service (ERA5)

How a twin is chosen

  • Same area: fires that have already ended, less than 250 km from this one, since 2016.
  • Same start: we compare the FWI on the first day, the minimum humidity that day and the run of days without rain before it. The slider sets how much they may differ.
  • Only pages with final weather data (ERA5 reanalysis) calculated in the same way as this fire’s; agricultural and grass burns and pages with data under review are left out.
  • Fires burning at the same time as this one (a week before or after) are left out: they share the same spell of weather and do not count as a precedent.
  • They are sorted by similarity, and the outlines of the first five are drawn.

How we calculate it

Before and after, from space

Drag the line to compare the same ground before the fire and after it.

Before · 31 Aug 2019
After · 22 Sept 2019

If the day is cloudy, change the date: each satellite passes once a day. In false colour the burnt ground looks brown or red.

Detections table · 171Every satellite heat detection, one by one, with time, satellite, power and coordinates.
⬇ Download CSV Times in UTC. Each detection is a 375 m pixel: a large fire yields hundreds per pass.
Date and timeSatelliteFRP (MW)LatLon

Other fires nearby

All fires in Brazil

Frequently asked questions

How long did the Formosa do Rio Preto fire last?
According to the heat detections seen by satellite inside the perimeter, it burned from 7 September 2019 to 15 September 2019 (9 days). The perimeter dates it from 7 September 2019 to 12 September 2019.
How much area did it burn?
The perimeter GWIS (Copernicus) rebuilt from heat detections is 5,218 hectares (52.2 km²). It is an estimate: official national figures may differ.
Which municipalities burned?
The fire only entered Formosa do Rio Preto (5,260 ha, 0.3 %).
What was the weather like?
During the fire the temperature reached 35.8 °C, humidity dropped to 17 % and gusts hit 54 km/h. The fire danger index (FWI) reached 72, class Very extreme.
Where does this data come from?
From the GWIS (Copernicus) burnt perimeter, NASA FIRMS VIIRS hotspots and the administrative boundaries of Brazil (geoBoundaries). It is not an official report.
How did the fires that started in similar weather in this area end?
Fires less than 250 km away that started since 2016 with a similar FWI, humidity and dry spell: 23. Their median duration was 10 days and their median area 4,787 ha; 9 % went past 10,000 ha. In 19 of 23, not even 1 mm fell in the ten days after the end: they went out without rain. In the rest, the first rainy day brought a median of 2.3 mm.

Where to verify it

A satellite detection is not an official report. Final figures and the fire’s status are published by each country’s emergency service.

Emergency number: 193 · Emergency number and official warnings

Satellite cross-check

History of this page · 1 Changes in area, dates, name, official record or merged pages, compared every night since 24 October 2026.
  1. Last day with fire: 12 September 2019 → 15 September 2019.

RSS Changes to this page With cross-checks and a citable version

Does something look wrong on this page?

This page is built from satellite data and official records, and it sometimes gets things wrong: the wrong dates, the wrong town, two fires merged into one, or something that was not a wildfire at all. If you know this fire first-hand (you live nearby, saw it, fought it or reported on it), tell us what really happened and we will check it.

Report an error
What do you think is wrong?

We will only use your email to reply about this report. Privacy. This is not an emergency service: if there is a fire now, call 193.

How we know this
  • Perimeter: GWIS (Copernicus), rebuilt from heat detections rather than mapped on imagery.
  • Dates adjusted with the VIIRS detections inside the perimeter, which said 7 September 2019 to 12 September 2019. 171 Suomi-NPP VIIRS detections on those dates.
  • We have not matched this page with any official record.
  • Weather: Copernicus ERA5 reanalysis at the fire location, in cells of about 25 km.
  • Built-up area and population come from the JRC Global Human Settlement Layer (epoch 2020, 100 m cells), summed inside the perimeter: an estimate of what was there, not a damage count.

How we build fire pages: methodology

Where this data comes from

The perimeter comes from the Copernicus Global Wildfire Information System (GWIS), which rebuilds it from MODIS and VIIRS heat detections and publishes it under CC BY 4.0. It is not measured on imagery as in Europe, so it is an estimate. Heat detections come from the VIIRS sensors aboard Suomi-NPP and NOAA-20, distributed by NASA FIRMS at 375 m resolution. Municipal boundaries come from geoBoundaries ADM2 (Creative Commons Attribution 3.0 Intergovernmental Organisations (CC BY 3.0 IGO)). The area per municipality is computed by WorldFires by crossing the perimeter with those boundaries, so it may differ from each country’s official figure.