Feshi fire, 18 July 2026 Feshi, Kasongo-Lunda
The fire started on 18 July 2026 in Feshi, Congo - Kinshasa, and satellites saw it burning for 10 days. Copernicus’s global GWIS system rebuilt a burnt perimeter of 12,703 hectares from heat detections, spread across 2 municipalities.
It is the 34th largest in Kwango since 2016 (of 219 with a page). Number 128 in Congo - Kinshasa in 2026, of 523.
- Burnt area
- 12,703ha
- GWIS perimeter (Copernicus)
- Duration
- 10days
- 18 Jul 2026 – 27 Jul 2026
- Municipalities hit
- 2
- territories
- Started on
- 18 Jul
- 2026
- Heat detections
- 294
- in a single hotspot: 260 MW
- Danger at start
- 34
- High · FWI index
- Energy released
- 5.3GW
- sum of detected power
Where it burned
How it evolved, day by day
Fire radiative power detected each day, in megawatts, and number of hotspots. The magenta bar marks the peak day.
The weather it burned in
It had gone 57 days without rain (1 mm or more) when it started.
This area had burned before
96% of the perimeter overlaps earlier fires recorded since 2016: 4,306 ha in 2016, 2,807 ha in 2017, 5,065 ha in 2018, 2,855 ha in 2019, 5,976 ha in 2020, 4,946 ha in 2021, 1,510 ha in 2022, 4,335 ha in 2023, 3,500 ha in 2024, 4,055 ha in 2025. Part of it burned more than once, so the yearly figures add up to more than the 12,255 ha that had burned before.
What happened to each town
-
Feshi where it started8,324 ha reached on 17 Jul0.4 %
-
4,466 ha reached on 17 Jul0.2 %
Burnt area inside each municipality, from crossing the GWIS perimeter with administrative boundaries. The distance is from the town centre to the nearest fire: staying a kilometre away does not mean it reached the houses.
The weather day by day
ECMWF ERA5 reanalysis at the fire location, the standard reference for past weather, and the Canadian Fire Weather Index (the same system Copernicus uses), computed by WorldFires from that data. Days after the fire run until the first rain.
Open-Meteo.com (CC BY 4.0) · Copernicus Climate Change Service (ERA5)
| Day | High | Min. humidity | Peak gust | Rain | Danger (FWI) |
|---|---|---|---|---|---|
| 17 Jul | 30.0 °C | 21 % | 23 km/h | 0.0 mm | High 34 |
| 18 Jul | 29.9 °C | 21 % | 24 km/h | 0.0 mm | High 34 |
| 19 Jul | 30.3 °C | 24 % | 19 km/h | 0.0 mm | High 33 |
| 20 Jul | 27.3 °C | 43 % | 22 km/h | 0.0 mm | High 28 |
| 21 Jul | 28.6 °C | 47 % | 18 km/h | 0.2 mm | High 24 |
| 22 Jul | 31.5 °C | 31 % | 26 km/h | 0.0 mm | High 28 |
| 23 Jul | 31.9 °C | 18 % | 26 km/h | 0.0 mm | High 36 |
| 24 Jul | 31.8 °C | 28 % | 18 km/h | 0.0 mm | High 34 |
| 25 Jul | 29.1 °C | 39 % | 21 km/h | 0.1 mm | High 29 |
| 26 Jul | 30.8 °C | 33 % | 23 km/h | 0.0 mm | High 28 |
| 27 Jul | 29.4 °C | 40 % | 24 km/h | 0.0 mm | High 29 |
| 28 Jul after | 29.9 °C | 32 % | 25 km/h | 0.0 mm | High 31 |
| 29 Jul after | 29.0 °C | 38 % | 20 km/h | 0.0 mm | High 28 |
| 30 Jul after | 26.3 °C | 48 % | 20 km/h | 0.2 mm | High 24 |
| 31 Jul after | 25.3 °C | 57 % | 28 km/h | 0.1 mm | Moderate 20 |
| 1 Aug after | 29.6 °C | 36 % | 24 km/h | 0.0 mm | High 26 |
| 2 Aug after | 30.0 °C | 35 % | 23 km/h | 0.0 mm | High 26 |
| 3 Aug after | 27.9 °C | 41 % | 22 km/h | 0.1 mm | High 26 |
| 4 Aug after | 27.9 °C | 48 % | 21 km/h | 0.3 mm | High 24 |
| 5 Aug after | 29.5 °C | 38 % | 22 km/h | 0.0 mm | High 25 |
| 6 Aug after | 31.2 °C | 26 % | 22 km/h | 0.0 mm | High 30 |
| 7 Aug after | 29.1 °C | 37 % | 16 km/h | 0.0 mm | High 30 |
| 8 Aug after | 29.2 °C | 43 % | 22 km/h | 0.1 mm | High 28 |
Before and after, from space
Drag the line to compare the same ground before the fire and after it.
If the day is cloudy, change the date: each satellite passes once a day. In false colour the burnt ground looks brown or red.
The smoke
CAMS · CopernicusOn 19 July 2026 the air beside the fire reached 164 µg/m³ of PM2.5. That day averaged 114: 7.6 times the WHO daily guideline (15).
Particles from the Copernicus CAMS model at the centre of the perimeter; these are not measurements in each town. The pale bar is the worst hour, the solid one the daily average.
Open-Meteo.com (CC BY 4.0) · Copernicus Atmosphere Monitoring Service (CAMS)
Detections table · 294Every satellite heat detection, one by one, with time, satellite, power and coordinates.
| Date and time | Satellite | FRP (MW) | Lat | Lon |
|---|
Other fires nearby
Frequently asked questions
- How long did the Feshi fire last?
- GWIS (Copernicus) dates it between 18 July 2026 and 27 July 2026: 10 days between the first and last heat detection of the perimeter.
- How much area did it burn?
- The perimeter GWIS (Copernicus) rebuilt from heat detections is 12,703 hectares (127.0 km²). It is an estimate: official national figures may differ.
- Which municipalities burned?
- The fire entered 2 municipalities: Feshi (8,324 ha, 0.4 %); Kasongo-Lunda (4,466 ha, 0.2 %).
- What was the weather like?
- During the fire the temperature reached 31.9 °C, humidity dropped to 18 % and gusts hit 26 km/h. The fire danger index (FWI) reached 36, class High.
- Where does this data come from?
- From the GWIS (Copernicus) burnt perimeter, NASA FIRMS VIIRS hotspots and the administrative boundaries of Congo - Kinshasa (geoBoundaries). It is not an official report.
Where to verify it
A satellite detection is not an official report. Final figures and the fire’s status are published by each country’s emergency service.
Satellite cross-check
Does something look wrong on this page?
This page is built from satellite data and official records, and it sometimes gets things wrong: the wrong dates, the wrong town, two fires merged into one, or something that was not a wildfire at all. If you know this fire first-hand (you live nearby, saw it, fought it or reported on it), tell us what really happened and we will check it.
Report an error
Where this data comes from
The perimeter comes from the Copernicus Global Wildfire Information System (GWIS), which rebuilds it from MODIS and VIIRS heat detections and publishes it under CC BY 4.0. It is not measured on imagery as in Europe, so it is an estimate. Heat detections come from the VIIRS sensors aboard Suomi-NPP and NOAA-20, distributed by NASA FIRMS at 375 m resolution. Municipal boundaries come from geoBoundaries ADM2 (Creative Commons Attribution 3.0 Intergovernmental Organisations (CC BY 3.0 IGO)). The area per municipality is computed by WorldFires by crossing the perimeter with those boundaries, so it may differ from each country’s official figure.