Skip to content
worldfires
RU · Russia · –

Evenkiysky Rayon fire, 15 August 2020 Evenkiysky Rayon

Out · last detection 31 Aug 2020, 18:17 UTC

The fire started on 15 August 2020 in Evenkiysky Rayon, Russia, and satellites saw it burning for 17 days. Copernicus’s global GWIS system rebuilt a burnt perimeter of 18,847 hectares from heat detections, spread across a single municipality.

It is the 61th largest in Krasnoyarsk Krai since 2016 (of 538 with a page). Number 71 in Russia in 2020, of 592.

Burnt area
18,847ha
GWIS perimeter (Copernicus)
Duration
17days
15 Aug 2020 – 31 Aug 2020
Municipalities hit
1
districts
Started on
15 Aug
2020
Heat detections
3,154
in a single hotspot: 333 MW
Danger at start
29
High · FWI index
Average daily power
1.2GW
detected power per day, on average

Where it burned

HOTSPOTS BY DAY 15 Aug31 Aug
31 Aug 2020

How it evolved, day by day

15 Aug 2020 · 53 MW · 10 16 Aug 2020 · 188 MW · 19 17 Aug 2020 · 504 MW · 80 18 Aug 2020 · 4,257 MW · 258 19 Aug 2020 · 2,512 MW · 280 20 Aug 2020 · 31 MW · 17 21 Aug 2020 · 42 MW · 20 22 Aug 2020 · 358 MW · 140 23 Aug 2020 · 542 MW · 165 24 Aug 2020 · 821 MW · 163 25 Aug 2020 · 1,088 MW · 286 26 Aug 2020 · 1,986 MW · 430 27 Aug 2020 · 4,732 MW · 588 28 Aug 2020 · 1,121 MW · 280 29 Aug 2020 · 995 MW · 270 30 Aug 2020 · 599 MW · 83 31 Aug 2020 · 124 MW · 65
15 Aug 19 Aug 23 Aug 27 Aug 31 Aug

Fire radiative power detected each day, in megawatts, and number of hotspots. The magenta bar marks the peak day.

The weather it burned in

27°high
36km/h · peak gust
22%lowest humidity

It had gone 17 days without rain (1 mm or more) when it started. Rain came after the fire: 4.2 mm on 1 Sept.

This area had burned before

0% of the perimeter overlaps earlier fires recorded since 2016: 30 ha in 2016.

How big is it?

10 km
It burned the equivalent of 12% of the area of London (188 km² against 1,583 km²).

London boundary: geoBoundaries · Office for National Statistics (Open Government Licence v3.0).

This compares size, not location: both shapes are at the same scale, north up, centred on each other.

What happened to each town

  1. Evenkiysky Rayon where it started
    16,097 ha reached on 15 Aug
    0.0 %

Burnt area inside each municipality, from crossing the GWIS perimeter with administrative boundaries. The distance runs from the point marking the centre of each area to the nearest fire: staying a kilometre away does not mean it reached the houses.

People and buildings inside the perimeter

GHSL 2020
Built-up area< 0.1 ha
Residents< 20

Inside the perimeter there was no noticeable built-up land and almost nobody lived there (GHSL 2020, satellite-based estimate).

This is an estimate on 100 m cells, made from satellite imagery and census data: it does not mean that homes burned or that anyone was harmed. The perimeter also contains land that never burned.

Source: Global Human Settlement Layer (GHS-BUILT-S and GHS-POP R2023A), European Commission Joint Research Centre (JRC), © European Union, CC BY 4.0. Sum inside the perimeter computed by WorldFires. human-settlement.emergency.copernicus.eu

The weather day by day

ECMWF ERA5 reanalysis at the fire location, the standard reference for past weather, and the Canadian Fire Weather Index (the same system Copernicus uses), computed by WorldFires from that data. Days after the fire run until the first rain.

Open-Meteo.com (CC BY 4.0) · Copernicus Climate Change Service (ERA5)

Day High Min. humidity Peak gust Rain Danger (FWI)
15 Aug 17.5 °C 37 % 36 km/h 0.0 mm High 29
16 Aug 18.7 °C 31 % 35 km/h 0.0 mm High 28
17 Aug 22.0 °C 26 % 31 km/h 0.0 mm High 30
18 Aug 24.1 °C 22 % 33 km/h 0.0 mm High 36
19 Aug 26.9 °C 26 % 32 km/h 0.0 mm High 36
20 Aug 22.7 °C 54 % 36 km/h 4.3 mm High 26
21 Aug 24.6 °C 39 % 28 km/h 0.0 mm Low 6
22 Aug 24.7 °C 36 % 26 km/h 0.0 mm Moderate 19
23 Aug 23.6 °C 35 % 28 km/h 0.0 mm High 22
24 Aug 23.0 °C 34 % 25 km/h 0.0 mm High 24
25 Aug 23.3 °C 34 % 27 km/h 0.0 mm High 26
26 Aug 23.4 °C 26 % 35 km/h 0.0 mm High 32
27 Aug 23.2 °C 26 % 30 km/h 0.0 mm High 36
28 Aug 20.3 °C 42 % 19 km/h 0.0 mm High 22
29 Aug 21.3 °C 47 % 29 km/h 0.7 mm High 27
30 Aug 20.1 °C 49 % 26 km/h 0.0 mm Moderate 19
31 Aug 18.8 °C 49 % 30 km/h 0.3 mm Moderate 20
1 Sept after 15.8 °C 68 % 40 km/h 4.2 mm Low 6

Its twins: fires that started in the same weather

It started with an FWI of 28.9, a minimum humidity of 37% and 17 days without rain. Fires in the area that started in weather like this since 2016: 25.

FWI at the start 28.9
Minimum humidity 37 %
Days without rain 17
this fire chosen twins rest of the area
Almost identicalSimilar

Outlines of the closest twins

Evenkiysky Rayon fire, July 2019
3,648 ha 19 days FWI 31.3 Min. humidity 36 % 45 km away, in 2019

First rain (1 mm or more) after it ended: 4.2 mm on 1 Aug.

What happened to them

18 days
median duration
5,987 ha
median area
28 %
went past 10,000 ha
4.2 mm
rain at the end (median; 24 of 25 had it)

It was 3.1 times larger than the median of its twins and lasted 17 days, against 18 days.

Only 3 of its 25 twins burned more. The weather on the first day does not explain everything: the wind in the following days, the fuel and the firefighting also count. In 1 of 25, not even 1 mm fell in the ten days after the end: they went out without rain. In the rest, the first rainy day brought a median of 4.2 mm.

This is a bank of analogues: it shows what usually happens, not what will happen. With fewer than 15 twins we give no figures. How we calculate it

How it ended

4.2 mmfirst rain
1 Septthe day after it ended
36km/h · max. gust

It was considered over on 31 Aug, and on 1 Sept 4.2 mm fell. We do not know whether the rain or the firefighters put it out. Twins with rain when they ended: 24 of 25, with a median of 4.2 mm.

Weather on this page: Open-Meteo.com (CC BY 4.0) · Copernicus Climate Change Service (ERA5)

How a twin is chosen

  • Same area: fires that have already ended, less than 250 km from this one, since 2016.
  • Same start: we compare the FWI on the first day, the minimum humidity that day and the run of days without rain before it. The slider sets how much they may differ.
  • Only pages with final weather data (ERA5 reanalysis) calculated in the same way as this fire’s; agricultural and grass burns and pages with data under review are left out.
  • Fires burning at the same time as this one (a week before or after) are left out: they share the same spell of weather and do not count as a precedent.
  • They are sorted by similarity, and the outlines of the first five are drawn.

How we calculate it

Before and after, from space

Drag the line to compare the same ground before the fire and after it.

Before · 8 Aug 2020
After · 7 Sept 2020

If the day is cloudy, change the date: each satellite passes once a day. In false colour the burnt ground looks brown or red.

Detections table · 3,154Every satellite heat detection, one by one, with time, satellite, power and coordinates.
⬇ Download CSV Times in UTC. Each detection is a 375 m pixel: a large fire yields hundreds per pass.
Date and timeSatelliteFRP (MW)LatLon

Other fires nearby

All fires in Russia

Frequently asked questions

How long did the Evenkiysky Rayon fire last?
GWIS (Copernicus) dates it between 15 August 2020 and 31 August 2020: 17 days between the first and last heat detection of the perimeter.
How much area did it burn?
The perimeter GWIS (Copernicus) rebuilt from heat detections is 18,847 hectares (188.5 km²). It is an estimate: official national figures may differ.
Which municipalities burned?
The fire only entered Evenkiysky Rayon (16,097 ha, 0.0 %).
What was the weather like?
During the fire the temperature reached 26.9 °C, humidity dropped to 22 % and gusts hit 36 km/h. The fire danger index (FWI) reached 36, class High.
Where does this data come from?
From the GWIS (Copernicus) burnt perimeter, NASA FIRMS VIIRS hotspots and the administrative boundaries of Russia (geoBoundaries). It is not an official report.
How did the fires that started in similar weather in this area end?
Fires less than 250 km away that started since 2016 with a similar FWI, humidity and dry spell: 25. Their median duration was 18 days and their median area 5,987 ha; 28 % went past 10,000 ha. Only 3 of its 25 twins burned more. The weather on the first day does not explain everything: the wind in the following days, the fuel and the firefighting also count. In 1 of 25, not even 1 mm fell in the ten days after the end: they went out without rain. In the rest, the first rainy day brought a median of 4.2 mm.

Where to verify it

A satellite detection is not an official report. Final figures and the fire’s status are published by each country’s emergency service.

Emergency number: 112 · Emergency number and official warnings

Satellite cross-check

History of this page Changes in area, dates, name, official record or merged pages, compared every night since 24 October 2026.

Does something look wrong on this page?

This page is built from satellite data and official records, and it sometimes gets things wrong: the wrong dates, the wrong town, two fires merged into one, or something that was not a wildfire at all. If you know this fire first-hand (you live nearby, saw it, fought it or reported on it), tell us what really happened and we will check it.

Report an error
What do you think is wrong?

We will only use your email to reply about this report. Privacy. This is not an emergency service: if there is a fire now, call 112.

How we know this
  • Perimeter: GWIS (Copernicus), rebuilt from heat detections rather than mapped on imagery.
  • Dates from the perimeter: the VIIRS detections inside it did not change them. 3,154 Suomi-NPP VIIRS detections on those dates.
  • We have not matched this page with any official record.
  • Weather: Copernicus ERA5 reanalysis at the fire location, in cells of about 25 km.
  • Built-up area and population come from the JRC Global Human Settlement Layer (epoch 2020, 100 m cells), summed inside the perimeter: an estimate of what was there, not a damage count.

How we build fire pages: methodology

Where this data comes from

The perimeter comes from the Copernicus Global Wildfire Information System (GWIS), which rebuilds it from MODIS and VIIRS heat detections and publishes it under CC BY 4.0. It is not measured on imagery as in Europe, so it is an estimate. Heat detections come from the VIIRS sensors aboard Suomi-NPP and NOAA-20, distributed by NASA FIRMS at 375 m resolution. Municipal boundaries come from geoBoundaries ADM2 (Open Data Commons Open Database License 1.0). The area per municipality is computed by WorldFires by crossing the perimeter with those boundaries, so it may differ from each country’s official figure.